苯与丙烯烷基化失活沸石催化剂氢再生机理

对工业中试用于苯与丙烯烷基化失活β－沸石改性催化剂进行了H2再生研究。通过对失活、新鲜和再生后催化剂的TPO、TPD、孔结构测定和活性评价以及失活和再生催化剂样品上炭组成的GC－MS分析，讨论了H2再生后催化剂催化性能的恢复状况。解释了虽然仍有部分炭未被除去，但酸性和活性恢复良好的原因。提出了本文体系失活催化剂H2再生过程的作用机理。     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

Water/Oil Biphasic Hydroformylation of Higher Olefins over a TPPTS-Rh/SiO2 Catalyst

A novel TPPTS-Rh/SiO2 catalyst, prepared by directly modifying a heterogeneous highsurface-area Rh/SiO2 catalyst with water-soluble TPPTS ligands, could decrease the resistance of mass transfer in water/oil biphasic media for the hydroformylation of higher olefins. The catalytic performance for hydroformylation on this biphasic TPPTS-Rh/SiO2 catalyst system was higher than those of the traditional biphasic HRhCO(TPPTS)3 systems, owing to the chemical bonds between the highly dispersed Rh metal particles and the TPPTS ligands. The catalyst system is applicable for hydroformylation of higher olefins such as 1-dodecene.     

Membrane-immobilized haptoglobin as affinity matrix for a hemoglobin-A1c immunosensor

An amperometric immunosensor for hemoglobin-A1c (HbA1c) determination has been developed utilizing membrane-immobilized haptoglobin as affinity matrix fixed in front of a Pt-working electrode. The HbA1c assay was carried out in a two-step procedure including the selective hemoglobin enrichment on the sensor surface and the specific HbA1c detection by a glucose oxidase (GOx) labeled anti-HbA1c antibody. Hydrogen peroxide generated by the enzyme label was oxidized at +600 mV versus Ag/AgCl. A standard curve for HbA1c was obtained with a linear range between 0 and 25% HbA1c of total hemoglobin which correspond to 7.8–39 nM. ELISA studies confirmed the advantage of a sandwich-type format with haptoglobin as capture molecule for selective hemoglobin binding over the direct adsorption method. Results by the sandwich immunoassay showed a linear correlation within the clinically relevant range 5–20% (CV < 3). For sensor application the immobilization procedure of haptoglobin onto CDI-activated cellulose membranes was optimized.     

Highly regio- and stereocontrolled SN2′ reactions of gem-difluorinated vinyloxiranes with monoalkylcopper reagents

Reaction of gem-difluorinated vinyloxiranes with RCu(X)Li allowed us to introduce the R group regioselectively at the fluorine-attached terminal carbon atom in an S_N2′ manner to afford (E)-allylic alcohols exclusively, while homoallylic alcohols with anti stereochemical relationship were found to be obtained selectively from higher-ordered cuprates derived from CuCl and RMgBr in a ratio of 1:3.     

纳米Sb2O3的制备与性能研究

由于Sb2O3是一种性能优良的无机阻燃剂,并与卤素阻燃剂有很好的协效作用[1],1998年,全球用于阻燃的Sb2O3达80kt以上,占阻燃剂总耗量的7%[2]。但由于其本身的极性特点,加入到纤维、塑料等高分子材料中,材料的力学性能受到很大损失[3],因此对传统的微米级的Sb2O3进行超细、表面处     

Eu3+掺杂的Sr2CeO4荧光材料的燃烧法合成及其性能研究

以尿素作燃料,Sr,Ce和Eu的硝酸盐作反应物,采用燃烧法得到了稀土Eu3 掺杂的Sr2CeO4前驱体粉末.将前驱体在一定温度下烧结3 h,合成了红色荧光材料.经过对材料进行X射线衍射(XRD)分析,确定了烧结温度在1050～1200℃时,能够得到纯度较高的产品.用扫描电镜(SEM)观察到样品烧结后的形貌为不规则的椭圆形,粒径范围在1～3 μm之间.样品的发射光谱和激发光谱表明,Eu3 在Sr2CeO4基质中有很高的猝灭浓度(10%,摩尔分数),随着Eu3 掺杂浓度的增加,可以使蓝白光调整到红白光,进而到红光.     

锰、铑原卟啉IX-二甲酯配合物共振拉曼光谱研究

合成了MnPPCl,RhPPCl,RhPPN3,RhPP(CO)Cl四种配合物 (PP =ProtophyrinIXDimethy1Ester) ,用元素分析、红外吸收光谱及紫外吸收光谱确定了配合物的组成 ,测定了它们的共振拉曼光谱 ,对特征谱带进行了归属。分析了拉曼谱带和电子吸收谱带变化的原因 ,提出了谱带频率的变化受金属离子外层d电子和轴配体的影响。     

TiO2一维纳米材料及其纳米结构的合成

本文对合成TiO₂一维纳米材料及其有序纳米阵列的阳极氧化法、模板法以及水热法进行了全面而系统的评述，着重介绍了它们的最新研究进展。阳极氧化法能制备牢固负载于基体上的TiO₂纳米管阵列，这有助于构筑TiO₂纳米结构及其在纳米器件上的应用；与多种制备技术如溶胶－凝胶工艺、电化学沉积以及原子层沉积等相结合，模板法可以合成出多种形貌的TiO₂纳米材料如纳米管、纳米线和纳米棒，并可以通过改变所用模板的微观尺寸来调控TiO₂一维纳米材料及其有序阵列的微结构参数；水热合成法可以制备出直径小且比表面积大的TiO2纳米管粉末。但从目前看来，该法还不能制备出牢固负载于基体上的有序纳米阵列。文章最后指出了TiO₂一维纳米材料及其有序纳米阵列合成中存在的问题及今后发展方向。