溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

Kinetic model ofCO oxidation on nonuniform surface analyzed regardingCOads spillover, 2. homotopic method. Effect ofm1 surface portion

The homotopic method has been used to analyze the kinetic model of three-stageCO oxidation on two nonuniform surface patches conjugated byCO ₂ spillover. Diagrams of steady states depending on the portion of surface patchm ₁ at various temperatures and pressure ratiosP(O ₂)/P(CO) have been constructed. The ratios of different type patches corresponding to the maximum overall reaction rate have been found.     

Permeation associated with three-phase-partitioning method on release of green fluorescent protein

Transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were subjected to two methods of extraction: (1) freezing/thawing/sonication (FTS) cycles prior to the three-phase partitioning (TPP) method, or (2) directly to TPP extraction. The amount of GFPuv released by the FTS plus TPP method varied: 374μg/mL (first cycle), 93–442 μg/mL (second cycle), 32–359 μg/mL (third cycle), 18–115 μg/mL (fourth cycle). The GFPuv yields by the second method (TPP only) were, 23–54 μg/mL for the first extract and 33–91 μg/mL for the second. The FTS plus TPP method released similar amounts of GFPuv to that extracted by TPP; and provided a better mixture elution through the hydrophobic interaction column: 13–63 μg/mL for FTS plus TPP methods, and 2.5–13 μg/mL for TPP. The results showed that although selective permeation is a more laborious methodology, it was more efficient for obtaining of GFPuv in relation to the direct extraction of the cells for TPP.     

Thermodynamics of liquid Fe-Si and Fe-Ge alloys

The enthalpies of mixing of liquid binary Fe-Ge (1765±5 K) and Fe-Si (1750±5 K) alloys were determined using a high-temperature isoperibolic calorimeter. The thermodynamic properties of Fe-Ge melts were also studied by electromotive force method in the temperature range of 1250-1580 K. The comparison of our measurement results with literature data has been performed. The extreme negative values of integral enthalpy of mixing and alternating-sign deviations from Raoult's low for germanium can be explained by the influence of binary clusters formation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Quantum-chemical study of manifestations of conjugation in molecules containing conjugated C=C and C=O bonds

Based on the MNDO calculations of the electronic structure of the molecules of acrolein, glyoxal, and butadiene, possible mechanisms of the conjugation in systems containing conjugated C=C and C=O bonds have been analyzed. In the electronic ground state ofs-trans-acrolein, the , -conjugation is very small, whereas in the first excited electronic state, the conjugation is substantial, In the ground state ofs-trans-glyoxal, the ,-conjugation should manifest itself clearly but should be weaker than in butadiene, whereas in the first excited electronic state, this conjugation should be more pronounced, Alternation of double and single bonds in the classic structural formula of a molecule does not ensure that this molecule exhibits the properties of a -conjugated system even in planar conformations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1648–1652, July, 1996.     

Spectroelectrochemical and Voltammetric Studies of L‐DOPA

The electrooxidation of L -dopa at GC electrode was studied by in situ UV-vis spectroelectrochemistry (SEC) and cyclic voltammetry. The mechanism of electrooxidation and some reaction parameters were obtained. The results showed that the whole electrooxidation reaction of L -dopa at glassy carbon (GC) electrode was an irreversible electrochemical process followed by a chemical reaction in neutral solution (EC mechanism). The spectroelectrochemical data were treated by the double logarithm method together with nonlinear regression, from which the formal potential E⁰=228 mV, the apparent electron-transfer number of the electrooxidation reaction αn=0.376 (R=0.99, SD=0.26), the standard electrochemical rate constant k⁰=(3.93±0.12)×10⁻4 cm s⁻¹ (SD=1.02×10⁻²), and the formation equilibrium constant of the following chemical reaction k_c=(5.38±0.34)×10⁻¹ s⁻¹ (SD=1.02×10⁻²) were also obtained.     

“Comment” on the Reply to the Paper “On the Elber–Karplus Reaction Path-Following Method and Related Procedures”

The flaws in the Reply [1] to our paper [2] have been pointed out. Elber and Karplus (EK) have not disproved our irrefutable global statement that the energy average cannot be minimized which rebuts the theoretical background of EK-type calculations. Another statement of ours has shown that even a curve for which the average energy is locally minimal for all directional perturbations in the sense of classical variational calculus cannot be identical with the reaction path (RP) defined as a steepest descent path (SDP). EK found an error in the early preprint of our theoretical paper [3] and because of this error they qualified our correct variational statement as false for all the SDPs consisting of a straight line each. Mixing global and variational arguments, EK refuted our criticism in a logically incorrect manner. In this Comment we prove that both of our earlier statements invariably remain in force and the criticism included in those has been as well-established and solid as was before.     

离子色谱法测定皂粒中葡萄糖酸钠含量

建立了离子色谱检测皂粒中葡萄糖酸钠含量的分析方法。样品经METROSEP CARB 1糖分析色谱柱(150 mm×4.0 mm,5μm)分离,以150 mmol·L~(-1) NaOH+20 mmol·L~(-1)NaAc水溶液为流动相进行等度洗脱,流速1.0 mL·min~(-1),采用瑞士万通850型离子色谱仪,选择脉冲安培检测器进行测定,外标法定量。结果显示:葡萄糖酸钠在0.5～200 mg·L~(-1)质量浓度范围内呈良好的线性,相关系数(r~2)为0.999 6,检出限为0.25 mg·L~(-1),定量下限为0.63 mg·L~(-1)。葡萄糖酸钠在1～20 mg/g加标范围内的回收率为80.7%～104%。该方法无需衍生化处理,操作简单方便,灵敏度高,可用于皂粒产线葡萄糖酸钠含量的监控与测定。     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

氯化聚乙烯弹性体的固相法合成

讨论了以固相法合成氯化聚乙烯（ＣＰＥ）弹性体的过程．实验结果表明，以固相氯化反应所得的ＣＰＥ，其大分子链上Ｃｌ取代基的分布比水相悬浮法更均匀．氯化过程的温度直接影响氯化速度及分子结构，如残留结晶、氯分布等．而聚乙烯颗粒表面与内部的氯化程度取决于氯化速度．大分子链上Ｃｌ取代基对邻近基团的氯化起阻碍作用