Freezing temperatures and densities of solutions of some hydrocarbons and sodium oleate inN-methylacetamide. Evidence for a solvophobic interaction

The freezing temperatures and densities (at 31°C) of solutions of octane, nonane, decane, 3,3-diethylpentane, and sodium oleate inN-methylacetamide (NMA) have been measured. The molality of the freezing solution was calculated from the density. The solubilities of octane, nonane, and decane inN-methylacetamide are also reported. Apparent molal volumes calculated from the densities are close to the values in the pure hydrocarbons and are not strong functions of the concentration. This indicates the absence of any unusual packing effect. The calculated free energies of transfer of the hydrocarbons from pure hydrocarbon to NMA solution are much less negative than the corresponding values for water, showing that the bulk solvophobic interaction inN-methylacetamide is smaller than in water. This is consistent with the freezing temperatures of sodium oleate which show that micelles do not form below 0.1 mole-kg^–1. The osmotic coefficients of the hydrocarbons calculated from the freezing temperatures showed negative deviations from ideality that were larger for the hydrocarbons with the higher molecular weights. Two estimates of the pairwise solvophobic interaction inN-methylacetamide indicate that it is also smaller than in water. The solvophobic effect in this solvent does not include the large entropy and enthalpy effects found in aqueous solutions.     

Diffusion in organic solvents: Interdiffusion coefficient of 1,1,2,2-tetrabromoethane

Interdiffusion coefficient have been measured for 1,1,2,2-tetrabromoethane in 21 organic solvents in order to ascertain the influence of shape, size, viscosity, nature and degree of branching, of the solvent molecules on transport properties. None of the existing correlations for diffusion in binary liquid systems appear to fit all the experimental data. Steric effects due to the solvent molecules are shown to be very important in the interpretation of the diffusion process.     

Averaged molecular weight of complex mixtures as determined by rapid measurements of diffusion

Summary The concept of a diffusion-averaged molecular weight, M_d is presented, and M_d is defined for polydisperse samples. It is shown via oligostyrene mixtures that M_d can be determined in 20 minutes with common chromatographic equipment. If M_d is measured and M_n or M_w is known, the polydispersity can be obtained.     

微铂电极上1-酰基二茂铁动力学参数的测定

本文合成并研究了１－酰基二茂铁在ＣＨ２Ｃｌ２中的伏安行为，测定了它们在ＣＨ２Ｃｌ２中不同支持电解质浓度时的扩散系数，并分明用Ｚ．Ｇａｌｕｓ和Ｋ．Ａｏｋｉ方法计算了两种状态下的电子迁移速率常数。讨论了取代基的诱导效应和共轭效应及其链长对１－酰基二茂铁的动力学性质的影响以及支持电解质及其浓度等因素对伏安曲线的影响。     

胺、醇、醚类化合物电离能的自相关拓扑研究

原子的染色序数 fi 定义为 :fi=gi·xi,式中 gi 为原子i在分子中的序数 ,xi 为其染色系数 .基于fi 建立改进的原子序数自相关拓扑指数mF ,其中的1F对烷烃及其衍生物具有良好的结构选择性 .使用第一电离能 (Ip)与0 F ,1F的数量关系模型对 32种脂肪族胺、醇、醚进行估算、预测 ,结果令人满意     

The ionization of sulfurous acid in Na−Mg−Cl solutions at 25°C

The stoichiometric pK ₁ ^* and pK ₂ ^* for the ionization of sulfurous acid has been determined from emf measurements in NaCl solutions with varying concentrations of added MgCl₂ (m=0.1, 0.2 and 0.3) from I=0.5 to 6.0 molal at 25°C. These experimental results have been treated using both the ion pairing and Pitzer's specific ion-interaction models. The Pitzer parameters for the interaction of Mg²⁺ with SO₂ and HSO ₃ ^– yielded =0.085±0.004, ⁽⁰⁾ = 0.35±0.02, ⁽¹⁾ = 1.2±0.04, and C = –0.072±0.007. The Pitzer parameters ⁽⁰) = –2.8±0.4, ⁽¹⁾ = 12.9±2.9 and ⁽²⁾ = –2071±57 have been determined for the interactions of Mg²⁺ with SO ₃ ^2– . The calculated values of pK ₁ ^* and pK ₂ ^* using Pitzer's equations reproduce the measured values to within ±0.04 pK units. The ion pairing model with log K_MgSO3=2.36±0.02 and log_MgSO3 = 0.1021, reproduces the experimental values of pK ₂ ^* to ±0.01. These results demonstrate that treating the data by considering the formation of MgSO₃ yields a better fit of the experimental measurements with fewer adjustable parameters. With these derived coefficients obtained from the Pitzer equations and the ion pairing model, it is possible to make reliable estimates of the activity coefficients of HSO ₃ ^– and SO ₃ ^2– in seawater, brines and marine aerosols containing Mg²⁺ ions.     

掺杂电活性离子聚吡咯膜内的电荷传输

用循环伏安法和计时库仑法研究了掺杂亚铁氰化钾离子的聚哟咯膜内的电荷传输问题。实验结果表明，聚吡咯膜内的电荷传递可以处理成电子在膜内的扩散模型，电荷传递速度可以 用电子表观扩散系数（Ｄａｐｐ）来表征。Ｄａｐｐ的大小由聚合物膜的结构、电活怀离子之间的过及对离了在膜中的运动决定。     

Second Dissociation Constants of 4-[N-morpholino]butanesulfonic Acid and N-[2-hydroxyethyl]piperazine-N′-4-butanesulfonic Acid from 5 to 55°C

The values of the second dissociation constant, pK ₂, for the dissociation of the NH⁺ charge center of the zwitterionic buffer compounds 4-(N-morpholino)butanesulfonic acid (MOBS), and N-(2-hydroxyethyl)piperazine-N-4-butanesulfonic acid (HEPBS) have been determined from 5 to 55°C, including, 37°C at intervals of 5°C. The electromotive-force (emf) measurements have been made utilizing hydrogen electrodes and silver–silver chloride electrodes. The value of pK ₂ for MOBS was found to be 7.702 ± 0.0005, and 8.284 ± 0.0004 for HEPBS, at 25°C, respectively. The related thermodynamic quantities, G ^o, H ^o, S ^o, and C _p ^o for the dissociation processes of MOBS and HEPBS have been derived from the temperature coefficients of pK ₂. Both the MOBS and HEPBS buffer materials are useful as primary pH standards for the control of pH 7.3 to 8.6 in the region close to that of physiological fluids.     

Modeling high-pressure densities at wide temperature range with volume scaling: Cyclohexane + n-hexadecane mixtures

High-pressure density data for cyclohexane + n-hexadecane mixtures at a wide temperature range was modeled with several classical equations of state (EOS) and correlative models. A modification for softening the co-volume and another for a volume scaling of the Peng–Robinson EOS (VS-PR) were proposed. The VS-PR model is able to correlate the pure component experimental data employing only five adjustable parameters, with root-mean-square deviation (RMSD) between calculated and experimental densities essentially within the experimental error. This result is superior to widely used approaches, i.e., a six parameter Tait model and six parameter volume translations (temperature and pressure dependent) for Peng–Robinson and Patel–Teja EOS. The VS-PR model also represents well the isobaric thermal expansion and the isothermal compressibility coefficients of the pure cyclohexane, a small naphthenic substance as well as a long chain n-alkane hydrocarbon, n-hexadecane. When modeling the mixture data, the use of VS-PR model of pure components along with the Redlich–Kister expansion, truncated at the first term, the density was correlated within a RMSD only 60% greater than the experimental error. The proposed model is able to accurately represent all the tested mixture data with a relatively small number of parameters.     

Density and Speed of Sound for Binary Mixtures of a Cyclic Ether with a Butanol Isomer

Densities and speeds of sound of the binary mixtures 1,3-dioxolane + 1-butanol, 1,3-dioxolane + 2-butanol, 1,4-dioxane + 1-butanol, and 1,4-dioxane + 2-butanol have been measured at 25 and 40°C. The excess molar volumes and excess isentropic compressibility coefficients were calculated from experimental data and fitted to a Redlich–Kister polynomial function. Results were analyzed in terms of molecular interactions and compared with literature data.