氨基酸在乙醇/磷酸氢二钾双水相体系中分配行为

研究了5种结构和性质各异的氨基酸(谷氨酸,半胱氨酸,苯丙氨酸,赖氨酸,精氨酸)在亲水性有机溶剂乙醇和磷酸盐溶液形成的乙醇/K2HPO4双水相体系中的分配行为及其影响因素。当双水相体系中乙醇的质量分数从22%增加到30%时,半胱氨酸和苯丙氨酸的分配系数明显增大,其它三种氨基酸的分配系数变化幅度不大;当磷酸盐的质量分数从14%增加到22%时,氨基酸的分配系数的变化均不明显;双水相体系的pH值对氨基酸的分配系数影响较大,当pH增加时,5种氨基酸的分配系数均增加,但是当pH约为9.5时,苯丙氨酸、半胱氨酸的分配系数接近相等但与其它3种氨基酸的分配系数相差较多,当pH为6.0~8.0时,苯丙氨酸的分配系数远远大于另外4种氨基酸。氨基酸的支链结构中含有非极性基团将导致其分配系数的增加。     

快速气相色谱控制系统的设计与应用

设计了一种用于快速气相色谱(Fast gas chromatography,FGC)的新型控制系统。该控制器主要由色谱柱温度控制系统、自动进样及气路压力控制系统组成。其温度控制范围为30~160℃,升温速度约为3℃/s,温度控制精度为±0.5℃,载气压力控制范围为0~0.5 MPa。将本控制器应用于自制快速色谱,并用色谱对由直链正构烷烃(C1~C8)以及甲苯9种物质组成的标准样品进行测试。结果显示,色谱能在100 s内将此9种物质完全分开。     

陈化体系组成对Ce0.65Zr0.35O2储氧材料性能的影响

采用共沉淀法制备了Ce_0.65Zr_0.35O₂(CZ)储氧材料, 在传统的水陈化体系中引入了乙醇, 研究了乙醇的加入对CZ储氧材料性能的影响. 对所制备样品进行了傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、粉末X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附-脱附、储氧量(OSC)和H₂程序升温还原(H₂-TPR)的表征, 并考察了以CZ储氧材料为载体制备的单钯催化剂的三效性能. 结果表明, 乙醇引入陈化体系对样品的结构和性能有显著影响. 以醇水共存体系陈化制备的CZ储氧材料颗粒小、堆积松散、孔径分布宽、孔容大, 具有优异的储氧性能和热稳定性, 经1000 °C焙烧后, 比表面积为29.3 m²·g^-1, 储氧量仍高达520 μmol·g^-1. 以此为载体制备的单钯催化剂, 空燃比操作窗口宽, 对C₃H₈、CO、NO的转化明显优于水陈化体系制备的储氧材料所制备的催化剂.     

A Multicolumn Ion Chromatographic Determination of Nitrate and Sulfate in Waters Containing Humic Substances

Abstract

A three-column ion chromatographic system for the removal of humic substances from natural waters, and subsequent on-line concentration and determination of nitrate and sulfate using non-suppressed ion chromatography is presented. Humic substances are removed using disposable adsorption columns packed with chemically bonded amine silica material. The sample is directly transfered to an ion exchange column where the anions are concentrated ca 10 times. After reversing the flow, the ions are transferred to a third column where they are separated and quantified. The detection limit is less than 1 mg L^?1 of nitrate or sulfate in water containing 45mgL^?1 of humic acid.     

纳米CoSe修饰氮掺杂多孔碳的可控制备及其锂硫电池多硫化物的催化转化效应

锂硫电池中较差的循环稳定性和倍率性能是实现锂硫电池商业化的技术障碍,其主要原因之一是多硫化物在硫电极内的电化学转化动力学较为缓慢。为此,我们以ZIF-9为前驱体,采用先碳化,再酸化刻蚀,最后硒化的方法合成了含少量催化剂的CoSe修饰氮掺杂多孔碳(CoSe/NC)电极材料,以期提高硫电极内多硫化物的电化学转化动力学性能,并通过流动液相三电极体系对该材料进行电化学动力学表征。结果显示,相较于对比材料,CoSe/NC能够加快多硫化物的氧化还原反应速率,在 0.2mA·cm^-2电流密度下,多硫化物氧化还原反应在CoSe/NC电极上有最小的反应过电位;同时,在0.1 V过电位下,各氧化还原反应也有最大的响应电流。因此,将 CoSe/NC作为硫宿主材料组装电池展现了优异的电化学性能：在 1C(1C=1 675 mA·g^-1)下初始放电比容量为1 068 mAh·g^-1,经过500次循环后,可逆容量仍保持在693 mAh·g^-1。另外,在3C的高电流密度下,放电比容量可高达819 mAh·g^-1。     

Sample Injection for Capillary Electrophoresis on a Micro Fabricated Device/On Chip CE Injection

Abstract

Reproducible injection for capillary electrophoresis on a micro device/Lab on chip is not an easy task. Different injection designs (e.g., T‐type, double T‐type, cross) and different injection modes have been applied (pinched injection, gated injection, optically gated injection, pressure/pneumatic injection, double L injection) with various analytes. Problems and properties of the different modes are described.     

The Review of the Catalyst System of Poly（ethylene oxide）

聚氧化乙烯（PEO）是环氧乙烷经开环聚合而成的一种多功能水溶性聚合物,性能优异,用途广泛。本文简述了聚氧化乙烯的典型特征和国内外研究进展,综述了聚氧化乙烯制备的各类催化剂体系,描述了催化剂聚合环氧乙烷的聚合机理,重点介绍了几种具有工业应用前景的催化剂体系：烷基金属催化剂体系、烷氧基金属催化剂体系和碱土金属氨化物催化痢体系。并对其技术发展和应用进行了展望。     

温控聚乙二醇两相体系中纳米钯催化肉桂醛选择性加氢反应

将具有“高温混溶、室温分相”功能的聚乙二醇4000(PEG₄₀₀₀)与甲苯-正庚烷组成的两相体系用于纳米钯催化的肉桂醛选择性加氢反应中.在优化的反应条件下,肉桂醛转化率和氢化肉桂醛选择性分别为99%和98%.钯纳米催化剂经简单分相即可与产物分离,且循环使用8次,其活性和选择性基本保持不变.     

Theoretical and experimental study of the biamperometry for irreversible redox couple in flow system

The biamperometry for the direct determination of irreversible redox analytes in flow system has been proposed based on coupling two independent and irreversible couples to form the biamperometric detection scheme. In this work, the method is studied both theoretically and experimentally. Equations describing the current–voltage characteristics and the current–concentration relationship are presented. The influence of the applied potential difference (ΔE) and the half-wave potential difference (ΔE_1/2) between two irreversible couples on the method are discussed. It shows that small ΔE_1/2 is favorable to construct the biamperometric detection system and to achieve high sensitivity and selectivity. Increasing ΔE leads to an increase in sensitivity. This is, however, accompanied by a decrease in selectivity and signal-to-noise ratio. To construct the biamperometric scheme for the irreversible systems with large ΔE_1/2, two approaches, adjusting acidity of supporting electroyte or adding new irreversible couple, are proposed by taking uric acid/platinum oxide and phenol/permanganate systems as examples. Uric acid and phenol are, respectively, detected in a flow injection system with a biamperometric detector.     

光固化环氧丙烯酸酯/SiO2杂化材料的研究

用FTIR、SEM、DSC和TGA表征了光固化环氧丙烯酸酯／SiO2杂化材料[(EA-TMSPM)／SiO2]，研究了盐酸、γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)和无机物浓度对(EA-TMSPM)／SiO2结构与性能的影响。结果表明，无机物浓度高的(EA-TMSPM)／SiO2杂化体系中SiO2粒子尺寸略大于无机物浓度低的体系；盐酸和无机物浓度的增加，都可以增强杂化材料的耐磨性。