Kr对HF(X1Σ+)基频和泛频的影响

运用Monte-Carlo轨迹法研究了Kr(1Sg)+HF(X1Σ+;ν=1,2,3;J=4)→Kr(1Sg)+HF(X1Σ+,ν',J')的碰撞过程,从而分析Kr原子对HF基频和泛频的影响。研究表明：在初始相对平动能Et≤251.0kJ/mol时,Kr原子能够减少产生基频的粒子数反转,增加产生泛频特别是ν'=2能级的粒子数反转,并且,Kr原子有较强的弛豫高转动态（J'≥4）的能力,因此,Kr原子对HF泛频激光在提高光强和增强大气传输能力方面均有 较大的改善。     

聚丙烯腈基碳纤维原丝在纺丝过程中纳米孔变化规律与机理研究

应用小角X射线散射等方法, 系统、定量地测试表征了聚丙烯腈基碳纤维原丝中纳米孔的尺寸、形状、体积分数、单位体积中纳米孔绝对数量以及纤维总孔洞率等形态结构参量, 并对这些参量在水洗、水洗牵伸、热致密化、高压蒸汽牵伸及热稳定化等工艺过程中的变化规律及原因进行了研究. 结果表明, 纺丝过程中牵伸及高温热处理均可使纤维总孔洞率逐步下降. 纳米孔尺寸体积分数V_i测试表明, 对于小于10 nm³的小纳米孔和大于10³ nm³的较大纳米孔, 两者的V_i在纺丝初期水洗牵伸工艺中分别为0.217和0.369, 而在纺丝后期热稳定化处理后发生大幅度改变, 分别为0.948 与0.015. 其原因并不是在高压蒸汽牵伸及热稳定处理中较小纳米孔含量的增加, 而是较大纳米孔含量的大幅度减少. 纳米孔形状研究表明, 纺丝工艺中的多次牵伸处理均使纳米孔的长短轴比加大, 而大于玻璃化温度的热处理均使纳米孔长短轴比收缩, 并且对于较小纳米孔来说这种收缩更为显著.     

用瑞利激光雷达16年观测数据分析合肥地区大气密度分布特征

介绍了L625瑞利激光雷达系统结构以及基于瑞利散射理论探测大气分子数密度的原理.提出了反复迭代修正大气透过率的计算方法,并通过模拟仿真验证了该算法的可靠性.通过误差分析得到影响大气分子密度不确定度的主要因素为回波信号信噪比以及参考点处大气分子数密度值,给出了回波信号误差产生的主要来源以及参考点选取方法.最后,分析了激光雷达16年观测数据反演的结果,得到合肥地区大气分子数密度的月份以及年份分布状况,结果表明:中层大气分子数密度分布呈现明显的季节性分布特征,冬季分布稀疏,夏季分布密集,随年份分布则较为平稳.通过将统计平均得到的密度廓线与1976美国标准大气模式比对分析,发现由激光雷达观测反演得到的结果较模式值大,二者的比值在1.05～1.13之间.     

Grain boundary,triple junction and quadruple point mobility controlled normal grain growth

Reduction in stored free energy provides the thermodynamic driving force for grain and bubble growth in polycrystals and foams. Evolution of polycrystalline networks exhibit the additional complication that grain growth may be controlled by several kinetic mechanisms through which the decrease in network energy occurs. Polyhedral boundaries, triple junctions (TJs), and quadruple points (QPs) are the geometrically distinct elements of three dimensional networks that follow Plateau’s rules, provided that grain growth is limited by diffusion through, and motion of, cell boundaries. Shvindlerman and co-workers have long recognized the kinetic influences on polycrystalline grain growth of network TJs and QPs. Moreover, the emergence of interesting polycrystalline nanomaterials underscored that TJs can indeed influence grain growth kinetics. Currently there exist few detailed studies concerned either with network distributions of grain size, number of faces per grain, or with ‘grain trajectories’, when grain growth is limited by the motion of its TJs or QPs. By contrast there exist abundant studies of classical grain growth limited by boundary mobility. This study is focused on a topological/geometrical representation of polycrystals to obtain statistical predictions of the grain size and face number distributions, as well as growth ‘trajectories’ during steady-state grain growth. Three limits to grain growth are considered, with grain growth kinetics controlled by boundary, TJ, and QP mobilities.     

离心泵叶轮参数对进口回流的影响

本文对不同叶片进口角、叶片数、不同叶顶间隙的开式和闭式离心叶轮共12种叶轮的进口流场和回流发生情况进行了探针的动态测试和可视化观察．弄清了上述叶轮参数对进口回流初始流量和进口流场的影响．     

组合原则回溯

从组合原则产生的背景和关键入手，分析和叙述了里兹的组合原则在光谱学上的重要意义，同时，也阐述了它与玻尔氢原子理论之间的关系。     

不可分辨跃迁阵模型下类镍金离子M带谱的理论计算

 用不可分辨跃迁阵模型(UTA model)计算类镍金(Au ⁵¹⁺)谱中8个跃迁阵的特征参数: 平均波数(kav)、半宽度(FWHM)、总强度(W)和谱线数(L)。利用高斯分布线型,根据各个阵的总强度进行叠加,得到了在总体上与实验相一致的结果,使得在实验中对金M带谱进行时间或空间的高分辨率测量成为可能。     

梯度折射率棒透镜的色差模型

本文提出一个梯度折射率棒透镜(GRIN－RodLens)的色差模型,并运用本模型合理地解释了在色差测量过程发现的各类色差现象.     

Kerr介质中级联三能级原子与压缩相干态相互作用的光子统计演化

本文研究了存在Kerr介质的高Q腔中压缩相干态与级联三能级原子相互作用的光子统计演化规律,讨论了光场参数、Kerr介质及相干振幅对平均光子数的影响.     

Topological order in the phase diagram for high-temperature superconductors with point defects

Applying a Lindemann like criterion obtained previously by Kierfeld et al. [J. Kierfeld, T. Nattermann, T. Hwa, Phys. Rev. B 55 (1997) 626], we estimate the magnetic field and temperature for a high-T_c superconductor, at which a topologically ordered vortex glass phase becomes unstable with respect to a disorder-induced formation of dislocations. The employed criterion is shown to be equivalent to a conventional phenomenological Lindemann criterion including the values for the numerical factors, i.e., for the Lindemann number. The positional correlation length of the topologically ordered vortex glass is calculated.