Macroscopic non-equilibrium thermodynamics in dynamic calorimetry

What is really measured in dynamic calorimetric experiments is still an open question. This paper is devoted to this question, which can be usefully envisaged by means of macroscopic non-equilibrium thermodynamics. From the pioneer work of De Donder on chemical reactions and with other authors along the 20th century, the question is tackled under an historical point of view. A special attention is paid about the notions of frequency dependent complex heat capacity and entropy production due to irreversible processes occurring during an experiment. This phenomenological approach based on thermodynamics, not widely spread in the literature of calorimetry, could open significant perspectives on the study of macro-systems undergoing physico-chemical transformations probed by dynamic calorimetry.     

THE BLOW-UP PROPERLIES OF SOLUTIONS TO SEMILINEAR HEAT EQUATIONS WITH NEUMANN BOUNDARY CONDITIONS

1IntroductionInthispaper,weconsidertheinitial-boundaryvalueproblem,where"o(x)isnon-negativesmoothfunctionsatisfying"o.(0)=0,"o.(1)=1'Whenconsideringtheblow-upofsolution,thefollowingproblemarisenaturally:Doesblow-upoccur?Howdoesthesolutionapproachtheblow-uptime'!Andwilersisthehotspotlocated(blow-upset)?WelookattheheatequationwithanonlillearboundaryconditiollHerefiisaboundeddomaininR",p>1isarealnumber.IthasbeenknownforalongtimethattheDroblelil(1.1).(1.2)withAL(~,0)--'no(x)doesnothaveaglobals…     

The course scheduling problem at Lufthansa Technical Training

Lufthansa Technical Training GmbH (LTT) performs training courses for Lufthansa Technik AG as well as for several other international airlines. Courses of about 670 different types are offered of which several hundred take place each year. The course scheduling problem faced by LTT is to construct a yearly schedule which maximizes the profit margin incurred while meeting a variety of complex precedence, temporal, and resource-related constraints. A “good” operational schedule should also meet a number of additional subordinate objectives. We formalize the problem and develop a heuristic scheme along with several priority rules, as well as a local search algorithm to determine well-suited weights for weighted composite rules. The operational planning situation of 1996 served as our major test instance; additional test instances were constructed by modifying this data. Several computational experiments were carried out to evaluate the performance of the algorithms. It turned out that the best so-found schedule is substantially better in terms of the profit margin incurred than the solution manually constructed by LTT.     

布拉格方程在高聚物结构研究中的应用

本文将布拉格方程推广应用到高聚物的结构研究中，得到了经不同剂量辐照的聚乙烯单晶的长周期，并辅以示差扫描量热法研究了γ－射线辐照对聚乙烯单晶结构的影响．     

Unconventional antiferromagnetic correlations of the doped Haldane gapsystem Y 2 BaNi 1 - x Zn x O 5

We make a new proposal to describe the very low temperature susceptibility of the doped Haldane gap compound Y₂BaNi_1-xZn_xO₅. We propose a new mean field model relevant for this compound. The ground state of this mean field model is unconventional because antiferromagnetism coexists with random dimers. We present new susceptibility experiments at very low temperature. We obtain a Curie-Weiss susceptibility χ( T ) ∼ C /(Θ + T ) as expected for antiferromagnetic correlations but we do not obtain a direct signature of antiferromagnetic long range order. We explain how to obtain the “impurity” susceptibility ( T ) by subtracting the Haldane gap contribution to the total susceptibility. In the temperature range [1 K, 300 K] the experimental data are well fitted by T ( T ) = C _imp 1 + T _imp / T . In the temperature range [100 mK, 1 K] the experimental data are well fitted by T ( T ) = A ln( T / T _c ), where T _c increases with x. This fit suggests the existence of a finite Néel temperature which is however too small to be probed directly in our experiments. We also obtain a maximum in the temperature dependence of the ac-susceptibility ( T ) which suggests the existence of antiferromagnetic correlations at very low temperature. Received 17 July 2001     

Zeroth and second laws of thermodynamics simultaneously questioned in the quantum microworld

A new and rather trivial model is suggested with mechanism that implies simultaneous violation of the zeroth and the second laws of thermodynamics. Mathematically rigorous quantum theory reduces to a trivial application of the Golden rule formula. It yields exciton on-energy-shell diffusion caused by bath-nonassisted excitation hopping between tails of different exciton site levels ε₁ < ε₂ broadened by bath-assisted finite life-time effects. The elastic character of the hopping implies 1 ↔ 2-symmetric transfer rate W. Thus the net diffusion exciton flow W(P ₁ - P ₂) and also, as argued, the net energy flow are possible due to different near-to-equilibrium exciton populations P ₁ > P ₂. As the sites are provided with two different baths, the population imbalance and the flows survive even for slightly different local bath temperatures T ₁ < T ₂ < T ₁ε₂/ε₁. Thus spontaneous exciton and also energy flows against temperature step become possible, in contradiction with the Clausius form of the second law. Violations of both the laws disappear in the high-temperature, i.e. classical limit Received 16 May 2001 and Received in final form 20 September 2001     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

绕圆柱体自由表面磁流体流动和传热的研究

本文对在不同雷诺数下,绕圆柱体的磁流体自由表面流动及传热进行了模拟,分析了磁场对绕流圆柱尾迹和涡分离的影响,获得了两种雷诺数下的电磁力密度、流场和温度场分布。结果表明,磁场不仅影响了流动的形态,而且对湍流有抑制作用,降低了自由表面的更新机制,从而减少了传热能力;在相同的Hartmann数下,相比低雷诺数下的流动换热情况,高雷诺数下的湍流不能被完全抑制,自由表面与尾迹的相互作用也较强,因而自由表面换热也较强。     

Development of a RILIS ionisation scheme for gold at ISOLDE, CERN

At the ISOLDE on-line isotope separation facility, the resonance ionisation laser ion source (RILIS) can be used to ionise reaction products as they effuse from the target. The RILIS process of laser step-wise resonance ionisation of atoms in a hot metal cavity provides a highly element selective stage in the preparation of the radioactive ion beam. As a result, the ISOLDE mass separators can provide beams of a chosen isotope with greatly reduced isobaric contamination. With the addition of a new three-step ionisation scheme for gold, the RILIS is now capable of ionising 26 of the elements. The optimal scheme was determined during an extensive study of the atomic energy levels and auto-ionising states of gold, carried out by means of in-source resonance ionisation spectroscopy. Details of the ionisation scheme and a summary of the spectroscopy study are presented.