快脉冲直线变压器驱动源模块的原理及实验

 介绍了直线型变压器驱动源（LTD）产生快脉冲的基本原理及技术优势,阐述了快脉冲LTD模块设计的要点,设计了输出脉冲上升时间小于100 ns的快脉冲LTD模块,并进行了初步的实验研究。实验得到该LTD模块充电±16 kV时,短路放电的电流峰值为23.7 kA,电流振荡1/4周期为69.6 ns;充电±50 kV驱动0.85 Ω负载时,电流峰值为41.4 kA,上升时间为36.8 ns（10%~90%）和60.8 ns（0~100%）。     

低温太阳热能与化学链燃烧相结合控制CO2分离动力系统

本文探索并提出控制CO2分离的低温太阳热能与清洁合成燃料甲醇-三氧化二铁化学链燃烧相结合的新颖能源动力系统。基于图象(?)分析方法,明确地指出甲醇化学链燃烧能量释放过程燃烧堋损失减小和低温太阳热能品位提升的机理。从能源有效利用和环境相容出发,研究和揭示化学链燃烧与太阳能有机整合共同减小CO2分离能耗的特性规律。相比不分离常规联合循环,新系统(?)效率提高约6．2个百分点;与分离CO2的联合循环相比,新系统媚效率提高约14．2个百分点。同时,低温太阳热能热转功效率可达到22．5％。     

Review of proton conductors for hydrogen separation

There is a global push to develop a range of hydrogen technologies for timely adoption of the hydrogen economy. This is critical in view of the depleting oil reserves and looming transport fuel shortage, global warming, and increasing pollution. Molecular hydrogen (H₂) can be generated by a number of renewable and fossil-fuel-based resources. However, given the high cost of H₂ generation by renewable energy at this stage, fossil or carbon fuels are likely to meet the short- to medium-term demand for hydrogen. In view of this, effective technologies are required for the separation of H₂ from a gas feed (by-products of coal or bio-mass gasification plants, or gases from fossil fuel partial oxidation or reforming) consisting mainly of H₂ and CO₂ with small quantities of other gases such as CH₄, CO, H₂O, and traces of sulphur compounds. Several technologies are under development for hydrogen separation. One such technology is based on ion transport membranes, which conduct protons or both protons and electrons. Although these materials have been considered for other applications, such as gas sensors, fuel cells and water electrolysis, the interest in their use as gas separation membranes has developed only recently. In this paper, various classes of proton-conducting materials have been reviewed with specific emphasis on their potential use as H₂ separation membranes in the industrial processes of coal gasification, natural gas reforming, methanol reforming and the water–gas shift (WGS) reaction. Key material requirements for their use in these applications have been discussed.     

High-frequency ultrasound treatment of sludge: combined effect of surfactants removal and floc disintegration

Ultrasounds represent an effective technology in many research fields. In sewage sludge treatment, low-frequency ultrasound, particularly at 20 kHz, are widely used for sludge disintegration before the anaerobic digestion, while in the last years novel application of high-frequency ultrasound regards the decontamination of water and wastewater through sonochemical reactions. The innovative approach presented in this paper is the treatment of sewage sludge with ultrasound at 200 kHz for obtaining efficient sludge disintegration and the removal of the linear alkylbenzenesulphonates (LAS) at the same time. Results of the sonolysis experiments showed that native LAS degradation up to 40% can be achieved with low power input in less than 1 h. The degradation pattern was different for each LAS homologue (from C10 to C13), because of their physical-chemical properties, in particular as regards the alkyl chain length. This high-frequency ultrasound irradiation resulted effective also in terms of floc disintegration and soluble organic matter release, in particular for energy inputs higher than 30,000 kJ/kg TS. The disrupting effect of the 200 kHz treatment was also evaluated by microscope analyses and determination of the extracellular polymeric substances release in the liquid phase.     

Extended Group Foliation Method and Functional Separation of Variables to Nonlinear Wave Equations

Generalized functional separation of variables to nonlinear evolution equations is studied in terms of the extended group foliation method, which is based on the Lie point symmetry method. The approach is applied to nonlinear wave equations with variable speed and external force. A complete classification for the wave equation which admits functional separable solutions is presented. Some known results can be recovered by this approach.     

Multi-linear Variable Separation Approach to Solve a (2+1)-Dimensional Generalization of Nonlinear Schrödinger System

By using a Bäcklund transformation and the multi-linear variable separation approach, we find a new general solution of a (2+1)-dimensional generalization of the nonlinear Schrödinger system. The new “universal” formula is defined, and then, rich coherent structures can be found by selecting corresponding functions appropriately.     

Aberration correction and its automatic control in scanning electron microscopes

An automatic aberration correction method has been implemented in scanning electron microscopes (SEM). Necessity of the automatic aberration correction is discussed. The procedure of the automatic aberration correction is explained in detail, where deconvolution techniques are used in order to extract probe information from SEM images. Due to the precise digitization and the usage of proper combinations of correction fields, linearity has been found between the amplitude of each aberration and the corresponding field strength. Experimental results are shown which demonstrate that the aberrations are corrected automatically by a linear feedback control method. After the automatic aberration correction, the image quality has been improved drastically.     

Simple and universal method in designs of high-efficiency diffractive optical elements for spectrum separation and beam concentration

Diffractive optical elements(DOEs) with spectrum separation and beam concentration(SSBC) functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into several wave bands so as to be effectively absorbed by photovoltaic materials with different band gaps. A new method is proposed for designing high-efficiency SSBC DOEs, which is physically simple, numerically fast, and universally applicable. The SSBC DOEs are designed by the new design method, and their performances are analyzed by the Fresnel diffraction integral method.The new design method takes two advantages over the previous design method. Firstly, the optical focusing efficiency is heightened by up to 10%. Secondly, focal positions of all the designed wavelengths can be designated arbitrarily and independently. It is believed that the designed SSBC DOEs should have practical applications to solar cell systems.     

基于线性方程组数学分离模型建立光纤传感过程检测复方缬沙坦氢氯噻嗪片溶出度

基于线性方程组数学分离模型建立在线过程检测复方缬沙坦氢氯噻嗪片溶出度方法。分别扫描缬沙坦和氢氯噻嗪的紫外吸收光谱,两组分在最大吸收波长处完全重叠。根据朗伯比尔定律吸光度加和性原理,分别测定两组分在最大吸收波长处的吸光系数,建立线性方程组数学分离模型,采用光纤传感过程分析技术(FODT)检测缬沙坦氢氯噻嗪片的溶出度,并与HPLC法相比较。在规定的溶出介质中,两种成分同时实时测定,并且FODT累积溶出度与HPLC法相比较结果无显著性差异(p>0.05)。不同批次药物的溶出行为一致,说明制剂工艺稳定,均匀度好。溶出曲线显示缬沙坦溶出快于并高于氢氯噻嗪,且30 min时两组分的溶出度均大于80%符合美国药典规定。结果表明,应用线性方程组数学分离模型结合FODT法可实现复方缬沙坦氢氯噻嗪片中双组分溶出度的同时检测,并可提供双组分的溶出过程曲线和全部溶出数据,直观反映各组分在各溶出时段的快慢,为此药建立标准提供依据。与HPLC法单点数据相比优势明显,更有利于药品评价和抽验质量分析。