伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

Thermodynamics of the dissociation of 2-aminopyridinium ion in synthetic seawater and a standard for pH in marine systems

Buffer solutions composed of 2-aminopyridinium chloride and 2-aminopyridine in synthetic seawater are useful as a supplement to buffers of Tris (pH 8.2) and Bis (pH 8.8) in standardizing measurements of hydrogen ion concentration (pm _H or pH(SWS)) in oceanography. The dissociation constant of 2-amino-pyridinium ion over the range of salinities (S) from 30 to 40 has now been determined from the emf of cells without liquid junction at eight temperatures (T) from 278.15 to 313.15 K. The results fit the equation pK=2498.31/T–15.3274+2.4050 lnT+S(0.012928–2.9417×10^–5T) with a standard deviation of 0.0023. Thermodynamic constants for the dissociation process and standard reference values of pm _H and pH(SWS) were derived from the data. The pm _H of the buffer consisting of 2-aminopyridinium chloride and 2-aminopyridine (each 0.04 molal) in synthetic seawater of salinity 35 varies from 7.356 at 278.15 K to 6.601 at 313.15 K.     

双冠醚研究(Ⅳ)——Schiff碱型和仲胺型双-(苯并15冠-5)对碱金属苦味酸盐的萃取行为

仲胺型双冠醚与四苯硼酸碱金属盐在丙酮溶液中。25℃下的电导说明它们与Na~+可能形成1∶1络合物(冠醚单元∶金属离子),而与K~+、Rb~+、Cs~+离子则形成2∶1络合物。用Schlff碱型和仲胺型双-(苯并15-冠-5)在水-氯仿体系中进行萃取,测量了分配比D和萃取平衡常数K,发现后者的K值均大于前者。双冠醚F_2对K~+的萃取能力最强,选择性最佳。     

Improvement of some pharmaceutical properties of nocloprost by β- and γ-Cyclodextrin Complexation

Inclusion complexation of nocloprost, a potent antiulcer prostaglandin derivative, with -, -, and -cyclodextrins (CyDs) in aqueous solutions has been studied by the solubility method and¹³C-NMR spectroscopy. The steric requirement of host-guest interaction was reflected in the magnitude of the stability constants and the thermodynamic parameters of the inclusion complexes. Solid complexes of nocloprost with - and -CyDs in a molar ratio of 1 : 2 were obtained on the basis of aBs-type phase solubility diagram. The X-ray diffraction data suggested that nocloprost is included in the cylindrical channel formed by coaxial alignment of -CyD molecules to give a channel type structure. Release and thermal behavior of the solid complexes was examined and compared with nocloprost itself. The results indicated that the -CyD complex may have great utility among the three CyDs, being a rapid dissolving form of nocloprost with improved thermal stability.     

Temperature regulation for thermal analysis under microwave radiation

In a microwave study a program was designed for thermal regulation. This software allows different types of regulations: P, PI, PD or PID (proportional integration derivation). Results obtained with PID and PI regulation for different previous linear heating schedules (1 deg·s^?1 and 0.15 deg·s^?1) imposed on a polymer sample (DGEBA/3DCM) up to 280°C and more are reported. Mathematical resolution of thermal laws applied to the sample permits the regulation constants (T _i,T _d andG _s) to be linked to the physical features of the polymer. A method used to calculate: the reflexion constant of the wave on the polymer, ρ and the diminution factor, α is presented.     

Physico-chemical studies on the chelation behaviour of biologically active 2-hydroxy-1-naphthaldehyde semicarbazone (HNAS) with some lanthanons

Summary The chelation behaviour of the complexes of La³⁺, Ce³⁺, Pr³⁺, Nd³⁺, Sm³⁺, Eu³⁺, Gd³⁺, Y³⁺, Tb³⁺, Dy³⁺, Ho³⁺ with biologically active 2-Hydroxy-1-naphthaldehyde semicarbazone (HNAS) has been studied potentiometrically in 75% (v/v) dioxane-water medium at various ionic strengths. The method of Bjerrum and Calvin, as modified by Irving and Rossotti has been used to find out the values of n andpL. The formation constants of metal chelates and the values ofS _min have been calculated. The order of formation constants of chelates was found to be: La³⁺3+3+3+3+3+3+3+3+3+3+.

---

Physikochemische Untersuchungen zur Komplexierung von biologisch aktivem 2-Hydroxy-1-naphthaldehyd-Semicarbazon (HNAS) mit Lanthanoiden

Zusammenfassung Das Chelierungsverhalten von La³⁺, Ce³⁺, Pr³⁺, Nd³⁺, Sm³⁺, Eu³⁺, Gd³⁺, Y³⁺, Tb³⁺, Dy³⁺ und Ho³⁺ mit 2-Hydroxy-1-naphthaldehydsemicarbazon (HNAS) wurde potentiometrisch in 75% (v/v) Dioxan-Wasser bei verschiedenen Ionenstärken untersucht. Die Werte für n undpL wurden nach der Methode von Bjerrum und Calvin in der Modifikation von Irving und Rossotti bestimmt. Die Komplexbildungskonstanten der Metallchelate und die WerteS _min wurden ermittelt. Die Reihung der Komplexbildungskonstanten war La³⁺3+3+3+3+3+3+3+3+33+.

     

Lithium bromide in acetonitrile: Thermodynamics,theory, and simulation

A variety of methods has been used for the study of lithium bromide solutions in acetonitrile yielding by their combination reliable information on different levels of approximation. Osmotic coefficients based on precise vapor pressure measurements are reproduced by CM (chemical model) and HNC (hypernetted chain) calculations and by BD (brownian dynamics) simulations. The results of neutron scattering experiments are treated with the help of HNC and BD methods. Hartree-Fock calculations on isolated LiBr pairs and solvated lithium ions yield reliable particle distances and reveal the geometry of the lithium solvation sphere.     

Reduced parabolic model for radical addition reactions

The transition state of addition of free radicals and atoms to multiple bonds is considered as a result of intersecting of two parabolic potential curves. One of them characterizes the stretching vibration of the attacked multiple bond, and another curve characterizes the stretching vibration of the bond formed in the transition state. The force constant of the latter is calculated by an empirical equation that correlates the force constant with the bond dissociation energy. In the framework of this model, the thermally neutral activation energy (E _e0) and the elongation of the attacked and formed bonds (r _e) in the transition state were calculated from the experimental data (activation energy (E _e) and enthalpy of reaction (H _e)) for the addition of an H atom and methyl, alkoxyl, aminyl, triethylsilyl, and peroxyl radicals to the C=C bond and the addition of H and CH₃ to the C=O and CC bonds. Analysis of the data obtained showed that E _e0 depends linearly on the |H _e| + E_e sum, i.e., E_e0/kJ mol^–1 = 14.2 + 0.61 · (E_e – H _e), and the bond elongation in the transition state for addition of the most part of radicals to ethylene and acetylene vary within (0.65–0.87)·10_–10 m. The factors affecting the activation energy of the radical addition reactions are discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1542–August, 2004.     

Calorimeters for biotechnology

The isothermal and temperature scanning calorimeters manufactured by Calorimetry Sciences Corporation are briefly described. Applications of calorimetry to determine thermodynamics and kinetics of reactions of interest in biotechnology are described with illustrative examples.     

Thermal properties of sodium acetylacetonate

Sodium acetylacetonate was prepared by the interaction of acetyl acetone with sodium hydroxide. The thermal conductivity, phonon velocity, mean free path, Yong's modulus, and the thermal expansion coefficient were studied. The thermal conductivity of the material decreases with increasing temperature due to the thermal lattice scattering of phonons. The velocity of phonons is also decreased due to the perturbation of thermal phonons. The linear thermal expansion coefficient increases with temperature due to the weakness of the attractive forces between the small Na⁺ cations and bulkier acetylacetonate anions in the lattice.

---

Zusammenfassung Natriumacetylacetonat wurde durch die Wechselwirkung zwischen Acetylaceton und Natriumhydroxid gewonnen. Es wurde die Wärmeleitfähigkeit, die Phononengeschwindigkeit, die mittlere freie Wegstrecke, das Elastizitätsmodul und der Wärmeausdehnungskoeffizient untersucht. Die Wärmeleitfähigkeit der Substanz nimmt wegen der thermischen Gitterstreuung der Phononen mit steigender Temparatur ab. Die Geschwindigkeit der Phononen nimmt auf Grund der Perturbierung der thermischen Phononen ebenfalls ab. Der lineare Wärmeausdehnungskoeffizient steigt mit zunehmender Temperatur an, was auf die schwachen Anziehungskräfte zwischen den kleinen Na⁺ Ionen und den massigen Acetylacetonat-Anionen im Gitter zurückzuführen ist.