Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering

This study is focused on multiscale characterization and constitutive parameters identification of selectively laser sintered PA12 specimens. The process parameters and change in crystallinity due to 3D printing were identified via differential scanning calorimetry (DSC). Tension, compression, shear, flexural and fracture tests performed on samples fabricated, both in 0° and 90° directions reveal that the tensile toughness of samples printed in 0° orientation, outperform samples printed in 90° orientation by an average of 24%. Cryogenically fractured samples were analyzed via SEM and micro-computed tomography to analyze 2D/3D defects and correlate the microstructure with macroscopic properties. The constitutive parameters for a strain-rate and temperature-dependent Three Network (TN) material model were identified using the measured mechanical properties. Furthermore, mechanical response of micro-architected Kelvin lattice structure was analyzed by Finite Element Method employing the TN constitutive model and the predictions were corroborated with measurements.     

常见客体分子对笼型水合物晶格常数的影响

Natural gas hydrates are considered as ideal alternative energy resources for the future, and the relevant basic and applied research has become more attractive in recent years. The influence of guest molecules on the hydrate crystal lattice parameters is of great significances to the understanding of hydrate structural characteristics, hydrate formation/decomposition mechanisms, and phase stability behaviors. In this study, we test a series of artificial hydrate samples containing different guest molecules (e.g. methane, ethane, propane, iso-butane, carbon dioxide, tetrahydrofuran, methane + 2, 2-dimethylbutane, and methane + methyl cyclohexane) by a low-temperature powder X-ray diffraction (PXRD). Results show that PXRD effectively elucidates structural characteristics of the natural gas hydrate samples, including crystal lattice parameters and structure types. The relationships between guest molecule sizes and crystal lattice parameters reveal that different guest molecules have different controlling behaviors on the hydrate types and crystal lattice constants. First, a positive correlation between the lattice constants and the van der Waals diameters of homologous hydrocarbon gases was observed in the single-guest-component hydrates. Small hydrocarbon homologous gases, such as methane and ethane, tended to form sI hydrates, whereas relatively larger molecules, such as propane and iso-butane, generated sⅡ hydrates. The hydrate crystal lattice constants increased with increasing guest molecule size. The types of hydrates composed of oxygen-containing guest molecules (such as CO₂ and THF) were also controlled by the van der Waals diameters. However, no positive correlation between the lattice constants and the van der Waals diameters of guest molecules in hydrocarbon hydrates was observed for CO₂ hydrate and THF hydrate, probably due to the special interactions between the guest oxygen atoms and hydrate "cages". Furthermore, the influences of the macromolecules and auxiliary small molecules on the lengths of the different crystal axes of the sH hydrates showed inverse trends. Compared to the methane + 2, 2-dimethylbutane hydrate sample, the length of the a-axis direction of the methane + methyl cyclohexane hydrate sample was slightly smaller, whereas the length of the c-axis direction was slightly longer. The crystal a-axis length of the sH hydrate sample formed with nitrogen molecules was slightly longer, whereas the c-axis was shorter than that of the methane + 2, 2-dimethylbutane hydrate sample at the same temperature.     

基于FeWOx/SiO2载氧体的甲烷化学链部分氧化反应

甲烷具有价格低廉且储量丰富的优点,因此将甲烷转化为合成气(一种H2:CO为2的混合物),从而进一步合成有价值的化学品和液体燃料引起了人们的极大关注.化学链甲烷部分氧化(CLPOM)技术能避免甲烷与空气直接接触而引起爆炸的危险,可以降低后续对合成气与氮气分离操作所带来的费用,因此日益受到关注.CLOPM过程主要分为两步:第一步,CH4被载氧体所携带的氧部分氧化,载氧体被还原;第二步,利用氧化剂(例如空气)将被还原的载氧体再氧化恢复.因此,载氧体在CLOPM过程中起到至关重要的作用.载氧体的选择主要存在两个问题:(1)甲烷被活化所产生含碳产物的能力与晶格氧的给氧能力不匹配所带来的严重碳沉积;(2)金属离子间扩散速率不匹配而造成载氧体在氧化还原过程中结构的不可逆变化.基于上述两个问题,本文设计了FeWOx/SiO2载氧体用于CLPOM.与未改性的WO3/SiO2载氧体相比,甲烷的转化率和合成气的收率都有显著提高.FeWOx/SiO2在900℃、1 atm反应条件下表现出62%的甲烷转化率、93%的CO气相选择性、94%的H2选择性和2.4的H2/CO比值,同时在50个循环中表现出优异的催化活性和稳定性.本工作利用CH4脉冲反应研究了FeWOx/SiO2的甲烷表面反应过程;采用CH4-TPR和H2-TPR相结合探究了甲烷活化速率与晶格氧扩散速率之间的关系;通过XPS和XRD对FeWOx/SiO2在氧化还原过程中的结构稳定性进行了探讨.综合上述实验结果,对FeWOx/SiO2应用于CLPOM的反应机理进行了阐述.H2-TPR结果表明,在FeWOx/SiO2中,相较于Fe2O3/SiO2,Fe-O的活性受到抑制,使其更倾向于与甲烷发生部分氧化反应;相较于WO3/SiO2,W-O的活性得到明显提升,因此更多的晶格氧可以参与到部分氧化反应中来氧化积碳,从而使合成气收率大幅度提升.从CH4-TPR结果可以看出,对于FeWOx/SiO2,CO与H2的生成温度最接近,意味着晶格氧的传输速率较快并且能够与甲烷活化产生含碳中间物种的速率相匹配,将其及时氧化生成CO,避免由于积碳造成的催化剂失活.结合XPS和XRD结果可以得出,在甲烷还原过程中,FeWOx经历一步还原形成Fe-W合金,由于其间存在强相互作用,因而抑制了还原过程中催化剂相分离现象的发生.同时,根据铁钨离子在空气条件下扩散速率的公式计算可以得出,其相近的离子氧化速率也保证了在氧化过程中催化剂结构的稳定性.本工作为进一步构建用于甲烷化学链部分氧化制合成气的复合金属氧化物载氧体提供了研究思路.     

The application of the Lattice Boltzmann method to the one-dimensional modeling of pulse waves in elastic vessels

The one-dimensional nonlinear equations for the blood flow motion in distensible vessels are considered using the kinetic approach. It is shown that the Lattice Boltzmann (LB) model for non-ideal gas is asymptotically equivalent to the blood flow equations for compliant vessels at the limit of low Knudsen numbers. The equations of state for non-ideal gas are transformed to the pressure-luminal area response. This property allows to model arbitrary pressure-luminal area relations. Several test problems are considered: the propagation of a sole nonlinear wave in an elastic vessel, the propagation of a pulse wave in a vessel with varying mechanical properties (artery stiffening) and in an artery bifurcation, in the last problem Resistor–Capacitor–Resistor (RCR) boundary conditions are considered. The comparison with the previous results shows a good precision.     

高雷诺数下非混相Rayleigh-Taylor不稳定性的格子Boltzmann方法模拟

本文采用相场格子Boltzmann方法研究了竖直微通道内中等Atwoods数流体的单模Rayleigh-Taylor不稳定性问题,系统分析了雷诺数对相界面动力学行为以及扰动在各发展阶段演化规律的影响.数值结果表明高雷诺数条件下,不稳定性界面扰动的增长经历了四个不同的发展阶段,包括线性增长阶段、饱和速度阶段、重加速阶段及混沌混合阶段.在线性增长阶段,我们计算获得的气泡与尖钉振幅符合线性稳定性理论,并且线性增长率随着雷诺数的增加而增大.在第二个阶段,我们观察到气泡与尖钉将以恒定的速度增长,获得的尖钉饱和速度略高于Goncharov经典势能模型的解析解[Phys.Rev.Lett.200288134502],这归因于系统中产生了多个尺度的旋涡,而涡之间的相互作用促进了尖钉的增长.随着横向速度和纵向速度的差异扩大,气泡和尖钉界面演化诱导产生的Kelvin–Helmholtz不稳定性逐渐增强,从而流体混合区域出现许多不同层次的涡结构,加速了气泡与尖钉振幅的演化速度,并在演化后期阶段,导致界面发生多层次卷起、剧烈变形、混沌破裂等行为,最终形成了非常复杂的拓扑结构.此外,我们还统计了演化后期气泡与尖钉的无量纲加速度,发现气泡和尖钉的振幅在后期呈现二次增长规律,其增长率系数分别为0.045与0.233.而在低雷诺条件下,重流体在不稳定性后期以尖钉的形式向下运动而轻流体以气泡的形式向上升起.在整个演化过程中,界面变得足够光滑,气泡与尖钉在后期的演化速度接近于常数,未观察到后期的重加速与混沌混合阶段.     

The Roper resonance in a finite volume

We calculate the energy levels corresponding to the Roper resonance based on a two-flavor chiral effective Lagrangian for pions, nucleons, deltas, and the Roper resonance at the leading one-loop order. We show that the Roper mass can be extracted from these levels for lattice volumes of moderate size.     

低汉明重量序列的分布

数n的汉明重量是指n的二进制字符串表达式中数字1的个数,用Ham(n)来表示.低汉明重量序列在密码系统和编码理论中有非常广泛的应用.本文建立了低汉明重量数的序列表达式,并且利用指数和的上界以及Erd?s-Turán不等式证明低汉明重量序列的均匀分布性质,从而确保密码算法的随机性和运算效率.     

The influence of sulfur substitution on the atomic displacement in Bi2Ti2O7

To clarify the role of A₂O′ and B₂O₆ networks on cation displacement observed in Bi₂Ti₂O′O₆, we used density functional theory calculations to examine the effect of sulfur substitution on the O′ and O sites on lone pair formation and resulting atomic displacement observed in Bi₂Ti₂O′O₆. Cation displacement in bismuth titanate is suppressed only when S is substituted on the O′ site. Analysis of the electronic structure shows that S substitution on the O′ site suppresses the formation of the asymmetric p-type lone pair by modifying the Bi-anion hybridization. Lone pair formation is favored in Bi₂Ti₂O′S₆ and the atomic displacement is larger than that observed in Bi₂Ti₂O′O_6. This enhanced displacement is due to weaker Bi-S versus Bi-O interactions leading to significantly stronger hybridization between the Bi and O′ states in Bi₂Ti₂O′S₆. We also induced lone pair formation in a metallic bismuth pyrochlore oxide (Bi₂Ru₂O′O₆) by modifying the Bi-O interactions through S substitution on the B₂O₆ network, indicating atomic displacement on the A₂O′ network may be achieved by modifying the B₂O₆ network.     

红外辐射多相复合粉体常温发射率的提高及波段宽化

通过多相成分分析, 以镁铝硝酸盐、正硅酸乙酯、钛酸四丁酯和氧氯化锆等为原料, 采用溶胶\|凝胶燃烧法合成了新型复相氧化物粉体, 研究了Ni和Fe离子掺杂及粉体细化对红外辐射率的提高及波段宽化的影响. XRD物相分析发现, 在1100～1200 ℃范围内煅烧可获得结晶良好的氧化物粉体, 该粉体的结构为堇青石及金红石等多相结构. 采用碳酸氢铵为pH调节剂与使用氨水相比, 粒子中位粒径有显著减小. 红外辐射性能显示, 在1～22 μm的宽波段内, 该复合粉体均具有很高的红外发射率, 在10 μm附近其红外发射率达到98%. 同时Ni及Fe离子的掺杂及粉体细化可引起堇青石晶格畸变, 增强了材料的非简谐效应, 从而有利于复合粉体红外辐射率的提高.     

正丁烷氧化制顺酐Ce基复合氧化物VPO催化剂研制

在用共沉淀方法制备的Ｃｅ－Ｆｅ复合氧化物中,加入ＶＰＯ化剂制备复合ＶＰＯ催化剂;井测试结构、氧化还原性能以及催化性能。实验结果表明,Ｃｅ－Ｆｅ复合氧化物的组成和数量均对复合ＶＰＯ催化剂的结构产生较大的影响,Ｃｅ－Ｆｅ复合氧化物的加入,提高了复合ＶＰＯ催化剂表面低温氧物种的活性,降低了品格氧物种的ＴＰＲ出峰温度,无论在有无气相氧条件下,复合ＶＰＯ催化剂的晶格氧均有良好的反应催化性能。