On the uniqueness of large deflections of a uniform cantilever beam under a tip-concentrated rotational load

The problem of a uniform cantilever beam under a tip-concentrated load, which rotates in relation with the tip-rotation of the beam, is studied in this paper. The formulation of the problem results in non-linear ordinary differential equations amenable to numerical integration. A relation is obtained for the applied tip-concentrated load in terms of the tip-angle of the beam. When the tip-concentrated load acts always normal to the undeformed axis of the beam (the rotation parameter, β=0) there is a possibility of obtaining non-unique solution for the applied load. This phenomenon is also observed for other rotation parameters less than unity. When the tip-concentrated load is acting normal to the deformed axis of the beam (β=1), many load parameters are obtained for a tip-angle with different deformed configurations of the beam. However, each load parameter corresponds to a tip-angle, which confirms the uniqueness on the solution of non-linear differential equations.     

A constitutive theory for shape memory polymers. Part II: A linearized model for small deformations

A constitutive theory is developed for shape memory polymers. It is to describe the thermomechanical properties of such materials under large deformations. The theory is based on the idea, which is developed in the work of Liu et al. [2006. Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modelling. Int. J. Plasticity 22, 279-313], that the coexisting active and frozen phases of the polymer and the transitions between them provide the underlying mechanisms for strain storage and recovery during a shape memory cycle. General constitutive functions for nonlinear thermoelastic materials are used for the active and frozen phases. Also used is an internal state variable which describes the volume fraction of the frozen phase. The material behavior of history dependence in the frozen phase is captured by using the concept of frozen reference configuration. The relation between the overall deformation and the stress is derived by integration of the constitutive equations of the coexisting phases. As a special case of the nonlinear constitutive model, a neo-Hookean type constitutive function for each phase is considered. The material behaviors in a shape memory cycle under uniaxial loading are examined. A linear constitutive model is derived from the nonlinear theory by considering small deformations. The predictions of this model are compared with experimental measurements.     

A constitutive theory for shape memory polymers. Part I: Large deformations

A constitutive theory is developed for shape memory polymers. It is to describe the thermomechanical properties of such materials under large deformations. The theory is based on the idea, which is developed in the work of Liu et al. [2006. Thermomechanics of shape memory polymers: uniaxial experiments and constitutive modeling. Int. J. Plasticity 22, 279-313], that the coexisting active and frozen phases of the polymer and the transitions between them provide the underlying mechanisms for strain storage and recovery during a shape memory cycle. General constitutive functions for nonlinear thermoelastic materials are used for the active and frozen phases. Also used is an internal state variable which describes the volume fraction of the frozen phase. The material behavior of history dependence in the frozen phase is captured by using the concept of frozen reference configuration. The relation between the overall deformation and the stress is derived by integration of the constitutive equations of the coexisting phases. As a special case of the nonlinear constitutive model, a neo-Hookean type constitutive function for each phase is considered. The material behaviors in a shape memory cycle under uniaxial loading are examined. A linear constitutive model is derived from the nonlinear theory by considering small deformations. The predictions of this model are compared with experimental measurements.     

Prediction of resolvent mode shapes in supersonic turbulent boundary layers

This work applies resolvent analysis to compressible zero-pressure-gradient turbulent boundary layers with freestream Mach numbers between 2 and 4, focusing exclusively on large scale motions in the outer region of the boundary layer. We investigate the effects of Mach number on predicted flow structures, and in particular, look at how such effects may be attributed to changes in mean properties. By leveraging the similarity between the compressible and incompressible resolvent operators, we show that the shape of the streamwise velocity and temperature components of resolvent response modes in the compressible regime can be approximated by applying ideas from wavepacket pseudospectral theory to a simple scalar operator. This gives a means of predicting the shape of resolvent mode components for compressible flows without requiring the singular value decompositions of discretized operators. At a Mach number of 2, we find that accurate results are obtained from this approximation when using the compressible mean velocity profile. At Mach numbers of 3 and 4, the quantitative accuracy of these predictions is improved by also considering a local effective Reynolds number based on the local mean density and viscosity.     

Assessment of Subgrid-Scale Models for Decaying Compressible MHD Turbulence

Large eddy simulation method is formulated for study of compressible magnetohydrodynamic turbulence and assessment of different subgrid-scale models as applied for decaying case is performed. The filtered equations of compressible magnetopause using the mass-weighted filtering operation are obtained. Mass-weighted filtered equations for large-scale turbulent component comprise subgrid-scale terms and five models for closure of the subgrid-scale terms are suggested. In present paper the obtained results of numerical computations for large eddy simulation are compared with the results of direct numerical simulation of three-dimensional compressible magnetohydrodynamic turbulence. Assessment of five subgrid-scale models of large eddy simulation for MHD flows is fulfilled. The comparisons between large eddy simulation and direct numerical simulation are carried out regarding the temporal evolution of the global quantities kinetic and magnetic energy, cross helicity and the spectra of kinetic and magnetic energy.     

A Conceptual Study of Cavity Aeroacoustics Control Using Porous Media Inserts

In this study, an integrated flow simulation and aeroacoustics prediction methodology is applied to testing a sound control technique using porous inserts in an open cavity. Large eddy simulation (LES) combined with a three-dimensional Ffowcs Williams–Hawkings (FW–H) acoustic analogy is employed to predict the flow field, the acoustic sources and the sound radiation. The Darcy pressure – velocity law is applied to conceptually mimic the effect of porous media placed on the cavity floor and/or rear wall. Consequently, flow in the cavity could locally move in or out through these porous walls, depending on the local pressure differences. LES with “standard” subgrid-scale models for compressible flow is carried out to simulate the flow field covering the sound source and near fields, and the fully three-dimensional FW–H acoustic analogy is used to predict the sound field. The numerical results show that applying the conceptual porous media on cavity floor and/or rear wall could decrease the pressure fluctuations in the cavity and the sound pressure level in the far field. The amplitudes of the dominant oscillations (Rossiter modes) are suppressed and their frequencies are slightly modified. The dominant sound source is the transverse dipole term, which is significantly reduced due to the porous walls. As a result, the sound pressure in the far field is also suppressed. The preliminary study reveals that using porous-inserts is a promising technology for flow and sound radiation control.     

Large deflection of flexible tapered functionally graded beam

In this paper the semi-analytical analyses of the flexible cantilever tapered functionally graded beam under combined inclined end loading and intermediate loading are studied.In order to derive the fully non-linear equations governing the non-linear deformation,a curvilinear coordinate system is introduced.A general non-linear second order differential equation that governs the shape of a deflected beam is derived based on the geometric nonlinearities,infinitesimal local displacements and local rotation concepts with remarkable physical properties of functionally graded materials.The solutions obtained from semi-analytical methods are numerically compared with the existing elliptic integral solution for the case of a flexible uniform cantilever functionally graded beam.The effects of taper ratio,inclined end load angle and material property gradient on large deflection of the beam are evaluated.The Adomian decomposition method will be useful toward the design of tapered functionally graded compliant mechanisms driven by smart actuators.     

Creating 3D models of tractor tire footprints using close-range digital photogrammetry

Close-range digital photogrammetry is utilized to construct the 3D models of an agricultural tire footprint. These models were then analyzed to obtain the tire footprint depth, area and volume. The procedure of using the photogrammetry technique for developing 3D models of a tire footprint on soil as well as an assessment of the accuracy of the 3D models are discussed in this paper. Testing was conducted using a tractor tire in a large soil bin in a lab to generate a single tire footprint along with a rolling tire test to simulate a longer tire rut. Our experiments showed that the close-range digital photogrammetry provides an efficient and accurate method to assess the depth and volume of the tire footprint in soil.     

Effect of surface character of filler particles on rheology of heat-set whey protein emulsion gels

Small-deformation and large-deformation rheological properties of heat-set whey protein emulsion gels containing active and inactive filler particles have been investigated using a controlled stress rheometer. The results suggest that the contributions to the gel network are quite different for pure protein gels and emulsion gels having similar storage moduli. An emulsion gel containing inactive filler has a larger phase angle due to the energy dissipation at the ‘slippery’ droplet surface under the influence of the applied shear stress. The large-deformation rheology of the heat-set protein gel has behaviour intermediate between that for an entropic biopolymer gel and that for a particle gel. Emulsion gels containing active or inactive fillers behave more like typical particle gel systems.