Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Analysis by liquid chromatography‐tandem mass spectrometry of biophenolic compounds in virgin olive oil,Part II

In this study the qualitative and quantitative content of the biophenolics in virgin olive oils is evaluated by liquid chromatography‐tandem mass spectrometry. The extraction and purification method for these compounds from virgin oils was optimised. After liquid‐liquid and solid‐phase extraction the separation of 35 of these compounds was achieved on reversed phase in gradient mode. The detection was preliminarily by UV and fluorescence, but then the final choice was ion‐spray tandem mass spectrometry in multiple reaction monitoring mode in negative ionization, acquiring two diagnostic product ions from the chosen precursor [M—H]^–. Using this last approach we obtained the best sensitivity, selectivity, and specificity. The recovery of the method ranged from 70–90% and detection limits were less than 1 ng for all the analyzed compounds.     

Phase Transition and Crystal Structure of the Monomeric Europium(II) Thiolate Eu(SC36H49)2

Single crystal X‐ray diffraction of Eu(SC₃₆H₄₉)₂ has revealed a first order phase transition at a temperature of 119 K, that involves a reduction of the specific volume by 1 %. The transition corresponds to a doubling of the unit cell, as it is the result from reorientations of isopropyl groups that appear at peripheral sites of the organic ligands. It is argued that a denser packing is achieved at the expense of a less favourable conformation of one of the two crystallographically‐independent complexes in the low‐temperature phase. The Bond‐Valence method is used to show that interactions of equal strengths are present between europium and both sulphur atoms and both coordinating phenyl rings.     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

三元配合物钯（Ⅱ）-2,2''-联吡啶-L-天冬氨酸与DNA作用研究

The ternary complex Pd(Ⅱ)-2,2‘-bipyridine-L-asparagic acid was synthesized and characterized by elemental analysis, IR-spectra and molar conductance. The formula of the complex is Pd(bipy)(L-asp). The interaction of the complex with DNA has been studied by UV-spectra, fluorescence spectra, CD-spectra and gel electrophoresis. The results showed that the interaction of the complex with DNA performed mainly in intercalative mode and the extent of interaction was dependent on the concentration of the complex.     

Synthesis and Characterization of Novel Organosoluble Methyl Substituted Poly(aryl Ether Ketone)s Containing Sulfone Linkage

Several new methyl substituted poly(aryl ether ketone)s containing sulfone linkage with inherent viscosities of 0.62–0.84 dL/g have been prepared from 4,4′‐bis(2‐methylphenoxy)diphenylsulfone and 4,4′‐bis(3‐methylphenoxy)diphenylsulfone with terephthaloyl chloride and isophthaloyl chloride by electrophilic Friedel‐Crafts acylation in the presence of DMF with anhydrous AlCl₃ as a catalyst in 1,2‐dichloroethane, respectively. These polymers having weight‐average molecular weight in the range of 71,000–49,000 are all amorphous and show high glass transition temperatures ranging from 167 °C to 191 °C, excellent thermal stability at temperatures over 400 °C in air or nitrogen, high char yields of 51–58% in nitrogen and good solubility in CHCl₃ and polar solvents such as DMF, DMSO and NMP at room temperature.     

Polymer bound glutamic acid salicylaldehyde Schiff‐base complex ­catalyst for oxidation of olefins with ­dioxygen

The polymer bound Schiff‐base ligand (PS‐SalGlu) has been prepared from polystyrene bound salicylaldehyde and glutamic acid, and its complex (PS‐SalGlu‐Co) has also been synthesized. The polymer ligand and its complex were characterized by infrared spectroscopy, small area X‐ray photoelectron spectroscopy, and inductively coupled plasma‐atomic emission spectro (ICP‐AFS). In the presence of the complex, cyclohexene can be effectively oxidized by molecular oxygen without reductant. The long‐chain linear aliphatic olefins, such as 1‐octene, 1‐decene, 1‐dodecene and 1‐tetradecene, can be directly oxidized by molecular oxygen catalyzed by PS‐SalGlu‐Co, which affords the 1,2‐epoxy alkane. Copyright © 2001 John Wiley & Sons, Ltd.     

Approaching supramolecular functionality

Functional molecules require a high degree of complexity which is difficult to achieve by covalent synthesis. This article discusses supramolecular approaches to the creation of larger architectures through noncovalent bonds, self-assembly, and template strategies. It highlights selected examples for the structural and conformational control of function and attempts to identify difficulties and challenges which may arise in future.     

Two noncentrosymmetric complexes: [W(CO)4(bipy)] and [W(CO)4(phen)](bipy = 2,2′-bipyridine, phen = 1,10-phenanthroline) obtained through solvothermal synthesis and their optical properties

Solvothermal treatments of W(CO)₆ with 2,2′-bipyridine and 1,10-phenanthroline give [W(CO)₄(bipy)] (1) and [W(CO)₄(phen)] (2), respectively, which both crystallize in noncentrosymmetric space groups, suggesting that they meet the requirement of second harmonic generation (SHG) investigations. The preliminary experiment indicates that they are SHG active, and approximately estimated to be that of urea.