Direct determination of the enantiomeric purity of oxyphenonium using chiral HPLC with post-column extraction detection

Summary A method is described for the determination of the enantiomeric purity (enantiomeric excess) of the anticholinergic drug oxyphenonium. The method for this quaternary ammonium compound is based on the direct HPLC analysis with a chiral stationary phase. Two kinds of 1-acid glycoprotein-bonded phases were used.For the detection a post-column extraction with fluorescence detection of the ion-pair counter ion dimethoxyantracene sulphonate was used.     

Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

HPLC Analysis of Cotinine in Urine After SPE with a Cholesterol-Modified Adsorbent

A one-step solid-phase extraction procedure, based on a new silica gel adsorbent modified with cholesterol groups, has been investigated for measurement of cotinine in urine. Cotinine is the main metabolite of nicotine in the human body and is analyzed as a biomarker for assessment of direct or passive exposure to tobacco smoke. New cholesterol-modified adsorbents have been obtained by chemical modification of silica gel of different porosity with cholesterol ligands. Although recovery by this extraction procedure were optimum over a relatively broad range of sample pH (3.1–8.0), analytical conditions such as sample loading, washing and elution conditions, concentration of cotinine to be extracted, and the type of adsorbent used for extraction were found to affect the efficiency of the procedure and had to be controlled for optimum recovery. When these conditions were controlled, recovery of cotinine from spiked human urine was reproducible and depended on compound ionization. Quantitative analysis of cotinine was performed by reversed-phase high-performance liquid chromatography with UV detection. Presented at: Conference of the Hyphenation of Liquid Chromatography–Nuclear Magnetic Resonance Spectroscopy, Liquid Chromatography–Mass Spectrometry and Related Topics, Tuebingen, Germany, March 25–29, 2006.     

纳米分辨率的三维形貌检测仪

从光干涉方式，瞳窗关系和光源带宽等基本关系出发，利用空间不变系统理论解析了相移显微干涉检测系统中衍射效应的影响。为了减小横向分辨率对纵向分辨率的影响，利用相关信息提取或数字滤波的方法，获得了纳米分辨率的三维形貌。     

Sequential injection analysis for benzophenone-4 and phenylbenzimidazole sulphonic acid in sunscreen sprays by solid-phase extraction coupled with ultraviolet spectrometry

A sequential injection UV method was developed to determine benzophenone-4 (BZ4) and phenylbenzimidazole sulphonic acid (PBS) simultaneously, these being the most commonly used UV-filters in aqueous formulations used as sunscreen sprays. The selective elution of both was performed by on-line solid-phase extraction, by retention on a SAX microcolumn and separation by varying the pH of elution. The sensitivity obtained was 0.042±0.001 ml μg⁻¹ for PBS and 0.0159±0.0003 ml μg⁻¹ for BZ4. The limit of detection was 1.6 μg ml⁻¹ for PBS and 0.6 μg ml⁻¹ for BZ4. The R.S.D. of the results was 1-6% for PBS and 1-12% for BZ4. The method was validated using commercial sunscreen formulations with concentrations determined by a liquid chromatographic procedure. The two procedures gave comparable results. Automation of the method means the amount of reagents used and residues generated are decreased. The system allows the required analysis sequence to be programmed using suitable software.     

Analysis of dinitro- and amino-nitro-toluenesulfonic acids in groundwater by solid-phase extraction and liquid chromatography–mass spectrometry

A reversed-phase LC–MS method with quadrupole-time of flight (QTOF) detection has been developed for the determination of four dinitro-toluenesulfonic acids and two amino-nitro-toluenesulfonic acids in groundwater. The analytes were separated by HPLC with 0.1% (v/v) formic acid as mobile phase modifier compatible with mass spectrometric detection. QTOF-MS analysis with negative ion electrospray ionization afforded good selectivity and sensitivity for analysis of the dinitro- and amino-nitro-toluenesulfonic acids. Structure elucidation and confirmation were accomplished by tandem mass spectrometry. Characteristic ions resulting from the loss of NO, NO₂, and SO₂ from the [M–H]^– ions were detected. An intense fragment ion at m/z 80 representing the [SO₃]^– ion was detected for all dinitro- and amino-nitro-toluenesulfonic acids. Solid-phase extraction using a co-polymer cartridge was developed for preconcentration of the analytes from water. Good recovery (>85%) was achieved when 0.1% formic acid was added into the water samples before extraction. Method detection limits ranged from 10 to 76 ng L^–1 for the targeted compounds when 10 mL water was analyzed. Groundwater samples collected from wells close to a former ammunition plant in Stadtallendorf, Germany, were analyzed for the dinitro- and amino-nitro-toluenesulfonic acids.     

Retention behavior and solvent optimization of organochlorine pesticides in solid-phase extraction

Summary Plots of capacity factor and retention time vs. elution solvent composition were proved to be useful to interpret the retention behavior of Kepone and its metabolites in a reversed-phase solid-phase extraction and to optimize the elution solvent. The percent recovery of Kepone was largely improved when the solvent was optimized. The standard deviations of the results of extractions were also improved upon the optimization of the solvent.     

Extraction and coordination studies of carbamoyl methyl sulfoxide (CMSO) with uranyl bis(β-diketonates). Synthesis and molecular structure of [{UO2(DBM)2}2C6H5CH2SOCH2CONHC6H5]

The carbamoyl methyl sulfoxide compounds of uranyl bis(β-diketonate) of the types [UO₂(DBM)₂CMSO] and [{UO₂(DBM)₂}₂CMSO] (where HDBM = C₆H₅COCH₂COC₆H₅; CMSO = C₆H₅CH₂SOCH₂CONHC₆H₅ or C₆H₅SOCH₂CONⁱPr₂) have been synthesized and characterized by IR and NMR spectroscopic techniques and elemental analysis. Spectral studies show that CMSO acts as a monodentate ligand in [UO₂(DBM)₂CMSO] compounds and bonds through the sulfoxo oxygen atom to the uranyl group. It acts as a bridging bidentate ligand in [{UO₂(DBM)₂}₂CMSO] compounds and bonds through both the sulfoxo and carbamoyl oxygen atoms to two different uranyl groups. The structure of the compound [{UO₂(DBM)₂}₂C₆H₅CH₂SOCH₂CONHC₆H₅] confirms the bridging bidentate mode of coordination for the CMSO ligand. Extraction studies show an enhancement in solvent extraction for the uranyl ion from nitric acid medium when a mixture of thenoyl trifluoroacetone (HTTA) and CMSO was employed.     

Azocalixarenes: Synthesis, Characterization, Complexation, Extraction, Absorption Properties and Thermal Behaviours

Azocalixarenes, which have a conjugated chromophore azo (–N=N–) group in p-positions, are synthesized in “one-pot” procedures in satisfactory yields. Their structures in the solid and solution are elucidated by UV–vis, FT-IR, ¹H and ¹³C NMR spectroscopic methods as well as elemental analysis techniques. Some of them are complexed with metal ions (alkali, alkaline-earth and transition metal ions) under neutral conditions. A wide variety of applications is expected by the functionalization of the side arms. The selective liquid–liquid extraction of various alkali, alkaline-earth and transition metal cations from the aqueous phase to the organic phase is carried out by using azocalixarenes. Furthermore, the synthesized azocalixarenes are utilized for selective extraction of Fe³⁺ cations from the aqueous phase to the organic phase. The effects of varying pH and solvent upon the absorption ability of azocalixarenes substituted with electron-donating and electron-withdrawing groups at their o-, m-, p-positions are examined. The thermal behaviours of azocalixarenes containing upper rim functionalized groups are investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG).