Caloric properties of dilute nonelectrolyte solutions: A success story

Selected aspects of the thermodynamics of very dilute solutions of gases in liquids, in particular aqueous solutions, are reviewed and connected with recent high-precision experimental techniques [vapor-liquid equilibrium measurements (VLE), calorimetry and densimetry]. Some of the problems encountered in data reduction and data correlation over large temperature ranges, including the critical region, are discussed. The focus is on caloric properties, such as partial molar enthalpy changes on solution, ΔH^∞₂, and partial molar heat capacity changes on solution, ΔC^∞_P,2: direct calorimetric methods are compared with indirect methods based on VLE studies as a function of temperature (van't Hoff approach).     

New method for calculating the adsorption of noble gases on amorphous surfaces

A new approach to calculating the equilibrium characteristics of the adsorption of noble gases on the amorphous surfaces of adsorbents was developed and applied to the Ar−TiO₂(rutile) system. Intermolecular adsorbate-adsorbate interactions are taken into account for the nearest neighbors in the quasi-chemical approximation. The lattice energy parameters of all interactions of the model are determined from the Lennard-Jones potential (12-6). The formation of amorphous TiO₂(rutile) surface includes completion of the surface layers and partial removal of the surface oxygen ions. The quality of the amorphization procedure was confirmed by the experimentally measured heats and isotherms of adsorption of the system under study. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1109–1118, June, 1997.     

The Impacts of Crystalline Structure and Different Surface Functional Groups on Drug Release and the Osseointegration Process of Nanostructured TiO2

In implantable materials, surface topography and chemistry are the most important in the effective osseointegration and interaction with drug molecules. Therefore, structural and surface modifications of nanostructured titanium dioxide (TiO₂) layers are reported in the present work. In particular, the modification of annealed TiO₂ samples with —OH groups and silane derivatives, confirmed by X-ray photoelectron spectroscopy, is shown. Moreover, the ibuprofen release process was studied regarding the desorption-desorption-diffusion (DDD) kinetic model. The results proved that the most significant impact on the release profile is annealing, and further surface modifications did not change its kinetics. Additionally, the cell adhesion and proliferation were examined based on the MTS test and immunofluorescent staining. The obtained data showed that the proposed changes in the surface chemistry enhance the samples’ hydrophilicity. Moreover, improvements in the adhesion and proliferation of the MG-63 cells were observed.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Untersuchungen an Natriumtrifluormethylsulfonat – Kristallstruktur und Phasenumwandlung des Monohydrats und Natriumionenleitfähigkeit des wasserfreien Salzes

Studies on Sodium Trifluormethanesulfonate – Crystal Structure and Phase Transition of Sodium Trifluormethanesulfonate Monohydrate and Sodium Ion Conductivity of Anhydrous Sodium Trifluormethanesulfonate According to the results of temperature dependent powder diffractometry (Guinier-Simon-technique) sodium trifluormethanesulfonate monohydrate is dimorphous. The phase transition occurs at ?35°C. The room-temperature modification crystallizes monoclinic in space group P2₁/c with the lattice parameters a = 941.6(5) pm, b = 654.3(2) pm, c = 1062.4(5) pm and β = 107.73(2)°. The crystal structure consists of double layers of trifluormethanesulfonate anions, the lipophilic CF₃-groups pointing at each other. Sodium is coordinated by four oxygen atoms from four different anions and by two molecules of crystal water. The resulting polyhedron may be addressed as a distorted octahedron. The low-temperature modification crystallizes orthorhombic in space group Pnma with the lattice parameters a = 645.31(9) pm, b = 538.03(9) pm, c = 1745.3(3) pm. The loss of crystal water occurs at 136°C. Anhydrous sodium trifluormethanesulfonate shows a phase transition at 252°C. The high-temperature modification is a good sodium ionic conductor (σ = 4.1 · 10^?1 Ω^?1 cm^?1 at 250°C).     

非缔合二元有机液体混合物过剩热容的测定与计算

溶液的过剩热容是热力学的重要函数，对其测定与研究具有理论与实际意义．过剩热容不仅可检验溶液中分子间的相互作用，并可利用其计算混合物的热容．本文报告了用微量热仪对环乙烷一本等七个二元物系全浓度范围内在29815K、常压下过剩热容CEp进行的测定工作，上述体系是由具有     

MHD Stagnation Point on Nanofluid Flow and Heat Transfer of Carbon Nanotube over a Shrinking Surface with Heat Sink Effect

This study is to investigate the magnetohydrodynamic (MHD) stagnation point flow and heat transfer characteristic nanofluid of carbon nanotube (CNTs) over the shrinking surface with heat sink effects. Similarity equations deduced from momentum and energy equation of partial differential equations are solved numerically. This study looks at the different parameters of the flow and heat transfer using first phase model which is Tiwari-Das. The parameter discussed were volume fraction nanoparticle, magnetic parameter, heat sink/source parameters, and a different type of nanofluid and based fluids. Present results revealed that the rate of nanofluid (SWCNT/kerosene) in terms of flow and heat transfer is better than (MWCNT/kerosene) and (CNT/water) and regular fluid (water). Graphically, the variation results of dual solution exist for shrinking parameter in range λc<λ≤−1 for different values of volume fraction nanoparticle, magnetic, heat sink parameters, and a different type of nanofluid. However, a unique solution exists at −1<λ<1, and no solutions exist at λ<λc which is a critical value. In addition, the local Nusselt number decreases with increasing volume fraction nanoparticle when there exists a heat sink effect. The values of the skin friction coefficient and local Nusselt number increase for both solutions with the increase in magnetic parameter. In this study, the investigation on the flow and heat transfer of MHD stagnation point nanofluid through a shrinking surface with heat sink effect shows how important the application to industrial applications.     

Heat capacity calorimetry

Experimental heat capacity measurements of α-ZrW₂O₈, and zeolitic polymorphs of SiO₂, BEA and MFI, have been made from 0.6 to 400 K. Measurements on β-ZrMo₂O₈ have been made from 8 to 400 K. Analysis of the results yields evidence for very low frequency modes in all four materials. These modes are responsible for negative thermal expansion behavior in α-ZrW₂O₈ and β-ZrMo₂O₈. Negative thermal expansion has been observed in some pure SiO₂ zeolites, but no studies have been made to look for it in BEA and MFI. The appearance of low frequency modes in these two zeolites suggests that temperature dependent structural investigations would be worthwhile. These modes are lower in energy than the Boson peak in vitreous silica. This revised version was published online in August 2006 with corrections to the Cover Date.     

Binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane

Densities and sound velocities of binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane were measured at 298.15 K and also the densities at 303.15 K. Excess volumes were determined from densities. Isentropic compressibilities were determined from densities and sound velocities, and excess thermal expansion factors were determined from excess volumes of two temperatures. Excess isothermal compressibilities and excess isochoric heat capacities were then estimated using excess isobaric heat capacities previously reported. Excess volumes and excess isentropic and isothermal compressibilities were negative except for cyclohexanone+1,4-dioxane system. This revised version was published online in August 2006 with corrections to the Cover Date.     

Improved semiempirical heats of formation through the use of bond and group equivalents

Deficiencies in energetics obtained using the common semiempirical methods, AM1, PM3, and MNDO, may partly be traced to the use of pseudoatomic equivalents for conversion of molecular energies to heats of formation at 298 K. We present an alternative scheme based on the use of bond and group equivalents. Values for the 61 bond and group equivalents necessary for treatment of molecules containing the common organic elements, hydrogen, carbon, nitrogen, and oxygen have been derived. For a set of 583 neutral, closed-shell molecules mean absolute errors in AM1, PM3, and MNDO heats of formation are reduced from 6.6, 4.2, and 8.2 kcal/mol to 2.3, 2.2, and 3.0 kcal/mol, respectively. Several systematic problems are overcome in the present scheme including relative stabilities of branched hydrocarbons, energetics of conjugated systems, heats of formation of long chain hydrocarbons, and enthalpies of molecules containing multiple heteroatoms. Although the approach is restricted to molecules with well-defined functional groups, the equivalents are easy to incorporate and are chemically relevant. This revised procedure allows semiempirical methods to be used for far more reliable evaluations of heats of reactions. Estimates are made of the errors inherent in these semiempirical formalisms, arising from integral approximations and the neglect of explicit treatment of electron correlation effects, while excluding those from inadequate parameterization.