In situ derivatization and hollow‐fiber liquid‐phase microextraction to determine sulfonamides in water using UHPLC with fluorescence detection

A sensitive method for determining sulfonamides in water was developed and validated through in situ derivatization and hollow‐fiber liquid‐phase microextraction with ultra‐high performance liquid chromatography and fluorescence detection. The target sulfonamides were sulfadiazine, sulfacetamide, sulfamerazine, sulfamethazine, sulfamethoxypyridazine, sulfachloropyridazine, sulfamethoxazole, and sulfisoxazole. Following in situ derivatization with fluorescamine, three‐phase hollow‐fiber liquid‐phase microextraction with an S 6/2 polypropylene hollow‐fiber membrane was applied automatically using a multipurpose autosampler. Experimental parameters including derivatization time, choice of organic phase, pH of donor and acceptor phase, stirring rate, extraction temperature and time were optimized. Under optimized conditions, the target sulfonamides achieved excellent linearity with correlation coefficients of 0.9924–0.9994 within the concentration range of 0.05–5 μg/L. The limits of detection of the eight sulfonamides were 3.1–11.2 ng/L, and the limits of quantification were 10.3–37.3 ng/L. Enrichment factors of 0.1 and 5 μg/L sulfonamides spiked in lake water were 14–60, and recoveries were 56–113% with relative standard derivations of 3–19%. Applied with the developed method, sulfamerazine and sulfamethoxazole were measurable in both influent and effluent water of the three sewage treatment plants in Guangzhou, China. The developed method was sensitive and provided an alternative method for simultaneously enriching and quantifying multiple sulfonamides in environmental water.     

Coupling nanoliter high‐performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation

Nanoliter high‐performance liquid chromatography shows low consumption of solvents and samples, offering one of the best choices for arsenic speciation in precious samples in combination with inuctively coupled plasma mass spectrometry. A systematic investigation on coupling nanoliter high‐performance liquid chromatography to inductively coupled plasma mass spectrometry from instrument design to injected sample volume and mobile phase was performed in this study. Nanoflow mobile phase was delivered by flow splitting using a conventional high‐pressure pump with reuse of mobile phase waste. Dead volume was minimized to 60 nL for the sheathless interface based on the previously developed nanonebulizer. Capillary columns for nanoliter high‐performance liquid chromatography were found to be sensitive to sample loading volume. An apparent difference was also found between the mobile phases for nanoliter and conventional high‐performance liquid chromatography. Baseline separation of arsenite, arsenate, monomethylarsenic, and dimethylarsenic was achieved within 11 min on a 15 cm C₁₈ capillary column and within 12 min on a 25 cm strong anion exchange column. Detection limits of 0.9–1.8 μg/L were obtained with precisions variable in the range of 1.6–4.2%. A good agreement between determined and certified values of a certified reference material of human urine (GBW 09115) validated its accuracy along with good recoveries (87–102%).     

Investigation of the chromatographic regulation properties of benzyl groups attached to bridging nitrogen atoms in a calixtriazine‐bonded stationary phase

Two reversed‐phase/anion‐exchange mixed‐mode stationary phases for high‐performance liquid chromatography using calixtriazines as chromatographic ligands were investigated with Tanaka test solutes, monosubstituted benzenes, aromatic positional isomers, and inorganic anions. Calixtriazine as a chromatographic ligand has been reported previously, but the benzylated nitrogen‐bridged calixtriazine‐bonded silica gel reported in this study is new. The experimental data showed that the calixtriazine platform is a unique chromatographic selector because its multiple active sites are available for different solutes and its chromatographic selectivity could be tuned by introducing substituent on the bridging nitrogen atoms present in the calixtriazine matrix. The synergistic effects of aromatic rings, nitrogen atoms, benzyl groups, and tunable cavity in the host molecule influenced the separation selectivity by multiple retention mechanisms. Such hybrid stationary phases provide more versatility and have great potential in the analysis of complex samples. Moreover, the synthetic protocols presented herein may provide an alternative understanding on macrocyclic host–guest chemistry, leading to new and selective separation media.     

Comparative study on the liquid chromatographic enantioseparation of cyclic β‐amino acids and the related cyclic β‐aminohydroxamic acids on Cinchona alkaloid‐based zwitterionic chiral stationary phases

The enantiomeric pairs of cis and trans stereoisomers of cyclic β‐aminohydroxamic acids and their related cis and trans cyclic β‐amino acids containing two chiral centers were directly separated on four structurally related chiral stationary phases derived from quinine and quinidine modified with (R,R)‐ and (S,S)‐aminocyclohexanesulfonic acids. Applying these zwitterionic ion‐exchangers as chiral selectors, the effects of the composition of the bulk solvent, the acid and base additives, the structures of the analytes, and temperature on the enantioresolution were investigated. To study the effects of temperature and obtain thermodynamic parameters, experiments were carried out at constant mobile phase compositions in the temperature range 5–50°C. The differences in the changes in standard enthalpy Δ(ΔH°), entropy Δ(ΔS°), and free energy Δ(ΔG°) were calculated from the linear van't Hoff plots derived from the ln α versus 1/T curves in the studied temperature range. Results thus obtained indicated enthalpy‐driven separations in all cases. The sequence of elution of the enantiomers was determined and found to be reversed when ZWIX(–)™ was changed to ZWIX(+)™ or ZWIX(–A) to ZWIX(+A).     

Separation of enantiomers of new psychoactive substances by high‐performance liquid chromatography

New psychoactive substances are defined as compounds with consciousness‐changing effects and have been developed simultaneously with classical drugs. They arise through structural modifications of illegal substances and are mainly produced to circumvent laws. Availability is simple, since new psychoactive substances can be purchased from the Internet. Among them many chemical drug compound classes are chiral and thus the two resulting enantiomers can differ in their effects. The aim of this study is to develop a suitable chiral high‐performance liquid chromatography separation method for a broad spectrum of new psychoactive substances using cellulose tris(3,5‐dichlorophenylcarbamate) as a chiral selector. Experiments were performed by high‐performance liquid chromatography in normal‐phase mode under isocratic conditions using ultraviolet detection. Direct separation was carried out on a high‐performance liquid chromatography column (Lux® i‐Cellulose‐5, 3.5 μm, Phenomenex®), available since 2016. Excellent separation results were obtained for cathinones. After further optimization, even 47 instead of 39 out of 52 cathinones showed baseline separation. For amphetamine derivatives, satisfactory results were not achieved. Further, new psychoactive substances from other compound classes such as benzofuranes, thiophenes, phenidines, phenidates, morpholines, and ketamines were partially resolved, depending on the polarity and degree of substitution. All analytes, which were mainly purchased from the Internet, were proven to be traded as racemates.     

Three‐phase solvent bar liquid‐phase microextraction combined with high‐performance liquid chromatography to determine sarcosine in human urine

Sarcosine is a potential prostate cancer marker. In this study, we developed a method of three‐phase solvent bar liquid‐phase microextraction combined with high‐performance liquid chromatography to determine sarcosine after derivatization with 4‐dimethylarminoazobenzene‐4‐sulfonyl chloride from human urine. The effects of different extraction conditions on extraction efficiency were investigated and optimized. Under optimum experimental conditions, a calibration graph exhibited linearity over the range of 0.05–25 μmol/L with a correlation coefficient (r²) of 0.9990. The enrichment factor was 168, and the detection limit was 0.02 μmol/L. The method was successfully used to analyze sarcosine in human urine and non‐invasive detection, and good spiked recoveries ranging from 90.5 to 93.6% were obtained. The proposed method exhibited high sensitivity, high enrichment factor, good precision, and a simple setup. It may contribute to the early accurate diagnosis and the progression monitoring of prostatic carcinoma.     

纳米锰基普鲁士白的制备及电化学储钠性能

采用高温共沉淀法制备锰基菱方相的普鲁士白正极材料,研究合成温度对产物微结构和电化学性能的影响。研究发现,随着合成温度的提高,产物的结晶度、颗粒尺寸和嵌钠容量明显提高。当合成温度为90℃时,产物在15 mA·g^-1下首次充放电容量分别达到142和139 mAh·g^-1。在30和50 mA·g^-1分别循环300和600次时,容量仍保持在111和89 mAh·g^-1。     

碳包覆LiFe0.5Co0.5PO4固溶体正极材料的制备及其电化学性能

分别以四水磷酸铁（FePO₄·4H₂O）和二水草酸亚铁（FeC₂O₄·2H₂O）为铁源,采用简单便捷的流变相法制备了碳包覆LiFe_0.5Co_0.5PO₄固溶体材料（LiFe_0.5Co_0.5PO₄/C,简称为LFCP/C）。采用X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）、恒流充放电等测试手段对复合材料的物相、形貌结构和电化学性能进行了表征和测试。结果表明,2种铁源得到的材料均为橄榄石晶型结构且结晶度良好,二者在颗粒尺寸分布、碳包覆效果和电化学性能方面具有显著的差别。用作锂离子电池正极材料时,以FeC₂O₄·2H₂O为原料得到的LFCP/C具有更优异的电性能：在2.5~5.0 V电压范围内,0.1C倍率下（1C=150 mA·g^-1）,放电比容量为137.5 mAh·g^-1,在10C仍具有57.6 mAh·g^-1的放电比容量;0.5C循环100次后容量仍保持78.1%。该样品更佳的电化学性能主要得益于其更小的平均颗粒尺寸,更高的比表面积和理想的碳包覆效果。     

Preparation,characterization and photocatalytic performance of polyoxometalate / polyaniline / titania ternary composite

A new CoW₁₁Mn/PANI/TiO₂ ternary composite was synthesized with K₈[Co(H₂O)MnW₁₁O₃₉] (CoW₁₁Mn) and PANI/TiO₂ by electrostatic self-assembly. These catalysts were characterized using infrared (IR) spectroscopy, X-ray diffraction, scanning electron microscopy, ultraviolet–visible spectroscopy, and N₂ adsorption–desorption. CoW₁₁Mn/PANI/TiO₂ was used to photodegradate the example contaminant, gentian violet (GV). Under the optimum photodegradation conditions, 92.63% degradation was achieved, indicating that the introduction of polyoxometalate and polyaniline greatly enhanced the photocatalytic performance of the catalyst. Moreover, CoW₁₁Mn/PANI/TiO₂ exhibits stable performance with little loss in activity after three successive runs. Thus, CoW₁₁Mn/PANI/TiO₂ ternary composite could be a promising photocatalyst in photodegradation of organic pollutants.     

制备方法对煤焦油模型化合物裂解催化剂Ni/Al_2O_3结构及性能的影响

采用等体积浸渍法、浸渍沉淀法和机械化学法(市售载体和自制载体)制备了Cat-1、Cat-2、Cat-3和Cat-4四种催化剂,通过BET、H_2-TPR、XRD、XPS和NH_3-TPD等表征催化剂的结构特征,考察了各催化剂对煤焦油模型化合物甲苯和芘(3%,质量分数)裂解反应性能的影响。结果表明,四种催化剂均为介孔材料,且Cat-4的介孔有序度更高,比表面积最大,达235 m~2/g。Cat-4催化剂中,NiAl_2O_4尖晶石的还原峰面积最高,占总面积的85.2%,还原后Ni的分散度最大,粒径最小,约为10.0 nm,意味着活性位点多。实验表明,除Cat-1外,其他催化剂对芘的裂解活性基本相当,其中,Cat-4作用下的析碳量最低,为10.84%,经Cat-1、Cat-2和Cat-3裂解后,体系中的析碳量分别较Cat-4增加了35.0%、74.7%和45.7%。可见,机械化学法制备的催化剂不仅具有最高的比表面积利于活性组分分散,而且NiAl_2O_4尖晶石含量最高,可抑制裂解过程中积炭的生成,因而最适宜于甲苯+芘裂解体系。