Orientation effects on the bandgap and dispersion behavior of 0.91Pb（Zn_（1/3）Nb_（2/3））O_3-0.09PbTiO_3 single crystals

0.91Pb(Zn_1/3Nb_2/3)O₃--0.09PbTiO₃ (PZN--9%PT) single crystals with different orientations are investigated by using a spectroscopic ellipsometer, and the refractive indices and the extinction coefficients are obtained. The Sellmeier dispersion equations for the refractive indices are obtained by the least square fitting, which can be used to calculate the refractive indices in a low absorption wavelength range. Average Sellmeier oscillator parameters E_o, $\lambda$_o, S_o, and E_d are calculated by fitting with the single-term oscillator equation, which are related directly to the electronic energy band structure. The optical energy bandgaps are obtained from the absorption coefficient spectra. Our results show that the optical properties of [001] and [111] poled crystals are very similar, but quite different from those of the [011] poled crystal.     

非线性等重码的一个上界

本文给出等重码的一个上界，并且举例说明这个上界是可以达到的，作为直接推论，我们推导出等重等距码的几个结果。     

Focusing of electromagnetic waves into a uniaxial crystal

We derive integral representations suitable for studying the focusing of electromagnetic waves through a plane interface into a uniaxial crystal. To that end we start from existing exact solutions for the transmitted fields due to an arbitrary three-dimensional (3D) wave that is incident upon a plane interface separating two uniaxial crystals with arbitrary orientation of the optical axis in each medium. Then we specialize to the case in which the medium of the incident wave is isotropic and derive explicit expressions for the dyadic Green's functions associated with the transmitted fields as well as integral representations suitable for asymptotic analysis and efficient numerical evaluation. Relevant integral representations for focused 3D electromagnetic waves are also given. Next we consider the special case in which (i) the incident field is a two-dimensional (2D) TM wave and (ii) the optical axis in the crystal lies in the plane of incidence, implying that we have a 2D vectorial problem, and derive dyadic Green's functions, integral representations suitable for asymptotic and numerical treatment, and integral representations for focused TM fields. Numerical results for focused 2D TM fields based on these integral representations as well as corresponding experimental results will be presented in forthcoming papers.     

Noise-assisted mound coarsening in epitaxial growth

Two types of mechanisms are proposed for mound coarsening during unstable epitaxial growth: stochastic, due to deposition noise, and deterministic, due to mass currents driven by surface energy differences. Both yield the relation H=(RWL)² between the typical mound height W, mound size L, and the film thickness H. An analysis of simulations and experimental data shows that the parameter R saturates to a value which discriminates sharply between stochastic () and deterministic () coarsening. We derive a scaling relation between the coarsening exponent 1/z and the mound-height exponent which, for a saturated mound slope, yields . Received: 11 November 1997 / Revised in final form: 28 November 1997 / Accepted: 28 November 1997     

STM图像的理论模拟

本文简要综述了STM基本理论和模拟方法 ,着重介绍了我们的一些工作 ,构造团簇模型和采用第一性原理方法 (DV LDF) ,模拟出不同取向C60 和它吸附在金属和半导体表面的STM图像 ,理论模拟结果都反映出了STM实验图像的主要特征     

基于异面交会的空中运动目标定位算法及误差分析

介绍了空中运动目标定位测量的经纬定位仪单站定向和双站异面交会定位原理,并对影响定向和定位结果的各个因素进行了误差分析和仿真.结果表明,交会角在[40°,165°]时.测量精度有明显地改善,为组网测量布站提供了依据.黑火药爆炸试验测量结果验证了该方法的可行性和测量精度.     

Improved growth of solution‐deposited thin films on polycrystalline Cu(In,Ga)Se2

CdS and Zn(O,S) grown by chemical bath deposition (CBD) are well established buffer materials for Cu(In,Ga)Se₂ (CIGS) solar cells. As recently reported, a non‐contiguous coverage of CBD buffers on CIGS grains with {112} surfaces can be detected, which was explained in terms of low surface energies of the {112} facets, leading to deteriorated wetting of the chemical solution on the CIGS surface. In the present contribution, we report on the effect of air annealing of CIGS thin films prior to the CBD of CdS and Zn(O,S) layers. In contrast to the growth on the as‐grown CIGS layers, these buffer lay‐ ers grow densely on the annealed CIGS layer, even on grains with {112} surfaces. We explain the different growth behavior by increased surface energies of CIGS grains due to the annealing step, i.e., due to oxidation of the CIGS surface. Reference solar cells were processed and completed by i‐ZnO/ZnO:Al layers for CdS and by (Zn,Mg)O/ZnO:Al for Zn(O,S) buffers. For solar cells with both, CdS and Zn(O,S) buffers, air‐annealed CIGS films with improved buffer coverage resulted in higher power‐conversion efficiencies, as compared with the devices containing as‐grown CIGS layers. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Optimal growth conditions for GdBa2Cu3O7 thin-film coated conductors characterized by polarized Raman scattering spectroscopy

High temperature superconducting GdBa₂Cu₃O₇ (GdBCO) thin films were grown by pulsed laser ablation. Textured MgO on metal substrates was used as a template for second generation wire applications. Growth conditions of GdBCO thin films were investigated for substrate temperature (T_s) and oxygen partial pressure (PO₂) during deposition. Superconducting critical currents of the films were obtained in the films grown at 790–810 °C of T_s and at 100–700 mTorr of PO₂. Scanning electron micrographs of the films revealed uniform and well-connected grains with some outgrown structures. X-ray θ–2θ scans of the films grown at 810 °C and 300–500 mTorr exhibited c-axis oriented texture. In-plane alignment and c-axis mosaic spread of the films were determined from X-ray Φ scans and rocking curves, respectively. Polarized Raman scattering spectroscopy was used to characterize optical phonon modes, oxygen content, cation disorder, and some possible second phases of the films. The Raman spectra of the films with large critical current density showed modes at 326–329 cm⁻¹, 444–447 cm⁻¹, 500–503 cm⁻¹ related to vibration of oxygen atoms. Origin of small peaks near 600 cm⁻¹ will be discussed as well. The information obtained from Raman scattering measurements will be useful for quality control of the conductors as well as optimization of the process conditions.     

Carbon K‐edge spectra of carbonate minerals

Carbon K‐edge X‐ray spectroscopy has been applied to the study of a wide range of organic samples, from polymers and coals to interstellar dust particles. Identification of carbonaceous materials within these samples is accomplished by the pattern of resonances in the 280–320 eV energy region. Carbonate minerals are often encountered in the study of natural samples, and have been identified by a distinctive resonance at 290.3 eV. Here C K‐edge and Ca L‐edge spectra from a range of carbonate minerals are presented. Although all carbonates exhibit a sharp 290 eV resonance, both the precise position of this resonance and the positions of other resonances vary among minerals. The relative strengths of the different carbonate resonances also vary with crystal orientation to the linearly polarized X‐ray beam. Intriguingly, several carbonate minerals also exhibit a strong 288.6 eV resonance, consistent with the position of a carbonyl resonance rather than carbonate. Calcite and aragonite, although indistinguishable spectrally at the C K‐edge, exhibited significantly different spectra at the Ca L‐edge. The distinctive spectral fingerprints of carbonates provide an identification tool, allowing for the examination of such processes as carbon sequestration in minerals, Mn substitution in marine calcium carbonates (dolomitization) and serpentinization of basalts.