经腹彩色多普勒超声检查对子宫内膜异位症的诊断价值

本研究选取我院100例子宫内膜异位症患者作为病例组、同期健康妇女100例作为对照组,探讨了经腹彩色多普勒超声检查对子宫内膜异位症患者子宫动脉血流特征、子宫特征的诊断价值.结果显示,病例组的子宫体积、子宫内膜厚度测定值均大于对照组(P＜0.05);摆动子宫颈后,病例组的EDV测定值低于对照组,RI测定值大于对照组(P＜(...     

Effect of thickness variations of lithium niobate on insulator waveguide on the frequency spectrum of spontaneous parametric down-conversion

We study the effect of waveguide thickness variations on the frequency spectrum of spontaneous parametric down-conversion in the periodically-poled lithium niobate on insulator (LNOI) waveguide. We analyze several variation models and our simulation results show that thickness variations in several nanometers can induce distinct effects on the central peak of the spectrum, such as narrowing, broadening, and splitting. We also prove that the effects of positive and negative variations can be canceled and thus lead to a variation-robust feature and an ultra-broad bandwidth. Our study may promote the development of on-chip photon sources in the LNOI platform, as well as opens up a way to engineer photon frequency state.     

考虑螺旋带径向厚度的螺旋线慢波系统的研究

分析了具有夹持杆和金属屏蔽筒并且考虑了螺旋带径向厚度的螺旋线慢波系统的色散特性和耦合阻抗。通过用切比雪夫多项式来展开螺旋带上的面电流,用真空层来模拟螺旋带的厚度,用均匀分层介质来等效介质夹持杆,得到了色散方程和耦合阻抗的表达式。与实验数据相比,考虑螺旋带厚度所得出的结果明显优于未考虑其厚度的结果。利用该模型设计了两个工作在3GHz的螺旋线慢波系统。     

Low‐energy ion scattering: Determining overlayer thickness for functionalized gold nanoparticles

With the widespread use of engineered nanoparticles for biomedical applications, detailed surface characterization is essential for ensuring reproducibility and the quality/suitability of the surface chemistry to the task at hand. One important surface property to be quantified is the overlayer thickness of self‐assembled monolayer (SAM) functionalized nanoparticles, as this information provides insight into SAM ordering and assembly. We demonstrate the application of high sensitivity low‐energy ion scattering (HS‐LEIS) as a new analytical method for the fast thickness characterization of SAM functionalized gold nanoparticles (AuNPs). HS‐LEIS demonstrates that a complete SAM is formed on 16‐mercaptohexadecanoic acid (C16COOH) functionalized 14 nm AuNPs. HS‐LEIS also experimentally provides SAM thickness values that are in good agreement with previously reported results from simulated electron spectra for surface analysis of X‐ray photoelectron spectroscopy data. These results indicate HS‐LEIS is a valuable surface analytical method for the characterization of SAM functionalized nanomaterials. Copyright © 2013 John Wiley & Sons, Ltd.     

Halocarbons in Antarctic Surface Waters

Abstract

Surface water samples taken during the 1988–89, 1989–90 and 1990–91 Italian expeditions were analyzed for the presence of carbon tetrachloride, trichloroethylene and tetrachloroethylene. The sample analysis was carried out by solvent extraction and capillary GC-ECD-MS determination. The above-mentioned halocarbons were at ng/l level in all water samples investigated.     

Adoption of Common Schemes for Single and Sequential Extractions of Trace Metal in Soils and Sediments

Abstract

The various methods for determining the mode of occurrence of trace metals in sediments and soils have a long history which dates back to the determinations of the availability of metals for plant nutrition performed earlier. Various methods have been developed in the 70′s and 80′s dealing with both single and sequential extraction schemes. Although some schemes received wide acceptance, none of them developed into a commonly accepted procedure. As a result, the information obtained was site-specific and the interpretation of the results scientist-specific. The workshop on single and sequential extraction in sediments and soils held at Sitges     

The influence of radiation-induced vacancy on the formation of thin-film of compound layer during a reactive diffusion process

A theoretical approach is developed that describes the formation of a thin-film of AB-compound layer under the influence of radiation-induced vacancy. The AB-compound layer is formed as a result of a chemical reaction between the atomic species of A and B immiscible layers. The two layers are irradiated with a beam of energetic particles and this process leads to several vacant lattice sites creation in both layers due to the displacement of lattice atoms by irradiating particles. A- and B-atoms diffuse via these lattice sites by means of a vacancy mechanism in considerable amount to reaction interfaces A/AB and AB/B. The reaction interfaces increase in thickness as a result of chemical transformation between the diffusing species and surface atoms (near both layers). The compound layer formation occurs in two stages. The first stage begins as an interfacial reaction controlled process, and the second as a diffusion controlled process. The critical thickness and time are determined at a transition point between the two stages. The influence of radiation-induced vacancy on layer thickness, speed of growth, and reaction rate is investigated under irradiation within the framework of the model presented here. The result obtained shows that the layer thickness, speed of growth, and reaction rate increase strongly as the defect generation rate rises in the irradiated layers. It also shows the feasibility of producing a compound layer (especially in near-noble metal silicide considered in this study) at a temperature below their normal formation temperature under the influence of radiation.     

Accuracy of high‐order density‐based compressible methods in low Mach vortical flows

At low Mach numbers, Godunov‐type approaches, based on the method of lines, suffer from an accuracy problem. This paper shows the importance of using the low Mach number correction in Godunov‐type methods for simulations involving low Mach numbers by utilising a new, well‐posed, two‐dimensional, two‐mode Kelvin–Helmholtz test case. Four independent codes have been used, enabling the examination of several numerical schemes. The second‐order and fifth‐order accurate Godunov‐type methods show that the vortex‐pairing process can be captured on a low resolution with the low Mach number correction applied down to 0.002. The results are compared without the low Mach number correction and also three other methods, a Lagrange‐remap method, a fifth‐order accurate in space and time finite difference type method based on the wave propagation algorithm, and fifth‐order spatial and third‐order temporal accurate finite volume Monotone Upwind Scheme for Conservation Laws (MUSCL) approach based on the Godunov method and Simple Low Dissipation Advection Upstream Splitting Method (SLAU) numerical flux with low Mach capture property. The ability of the compressible flow solver of the commercial software, ANSYS FLUENT , in solving low Mach flows is also demonstrated for the two time‐stepping methods provided in the compressible flow solver, implicit and explicit. Results demonstrate clearly that a low Mach correction is required for all algorithms except the Lagrange‐remap approach, where dissipation is independent of Mach number. © 2013 Crown copyright. International Journal for Numerical Methods in Fluids. © 2013 John Wiley & Sons, Ltd.     

The hyperconjugation effect on the graphene counterparts based on silicon and germanium

Bending of the A = A (A of the group IVA) double bond neighboring is rationalized by the hyperconjugation phenomenon analysis. The bending is also observed for the high sized linear, cyclic or graphene-like compounds that imply the conjugated double bonds. The electronic delocalization takes place between occupied σ(π) and unoccupied π*(σ*) orbitals especially for compound implying Si and Ge atoms. Leading to rippled structure, this phenomenon affects the silicene and germane thickness sheets and probably would have some consequences on the properties of such compounds when they will be involved in the industries in the future. However we introduce a new parameter to assess the thickness of graphenic structures when the hyperconjugation takes place in the bonding framework. The study has been undertaken at high levels of theory like B3LYP/6-311 + G(3df,2p).     

Effect of thickness of CdTe/Ge heterojunction photodetectors on optoelectronic properties

The influence of the thickness of CdTe/n-Ge heterojunction photodetectors on I–V curves was studied experimentally and theoretically. The thicknesses of the CdTe thin films were 110, 130, 150, and 200 nm. The power intensity of illumination was 150 mW/cm². Increasing the thickness led to an increase in photocurrent.