Adler-Bardeen theorem in path integral formulation

The higher order contributions to Jacobian in Fujikawa’s path integral framework is considered and the form of anomaly equation in higher orders is established. An argument for the Adler-Bardeen theorem in this formulation is given.     

CVD全离散化的混合有限元解的数值模拟

在已有的对CVD化学方程半离散化和全离散化混合有限元解的存在性及其误差分析的基础上,对其全离散化混合有限元解进行了数值模拟,结果进一步表明了混合有限元解的高精度、易于计算的良好性质.     

Application of the fractional factorial design in multiple W/O/W emulsions

In presented research, multiple W/O/W emulsions were developed by using experimental design method. A 24-1 fractional factorial design was performed by varying the following input parameters: primary polymeric emulsifier (PEG 30-dipolyhydroxystearate) concentration (0.8% and 2.4%), secondary polymeric emulsifier (Poloxamer 407) concentration (0.8% and 1.2%), electrolyte magnesium sulfate heptahydrate (0.08% and 0.4%) and electrolyte sodium chloride (0.08% and 0.4%). Multiple emulsions were prepared by a two-step emulsification process. Obtained emulsions were characterized with rheological measurements, conductivity and centrifugation tests. Factorial analysis revealed that the concentration of the primary emulsifier was the predominant factor influencing the phase separation, conductivity and maximal apparent viscosity. Additionally, electrolyte magnesium sulfate heptahydrate was more efficient in stabilizing these systems, compared to sodium chloride. The applied fractional factorial design method enabled determination of the optimal concentrations of the primary and secondary emulsifier, as well as the concentration of electrolytes, in order to obtain W/O/W emulsions with desired maximal apparent viscosities, low values of conductivity and without phase separation after centrifugation.     

Geometrically non-linear transverse vibrations of C-S-S-S and C-S-C-S rectangular plates

This paper is concerned with a new improved formulation of the theoretical model previously developed by Benamar et al. based on Hamilton's principle and spectral analysis, for the geometrically non-linear vibrations of thin structures. The problem is reduced to a non-linear algebraic system, the solution of which leads to determination of the amplitude-dependent fundamental non-linear mode shapes, the frequency parameters, and the non-linear stress distributions. The cases of C-S-C-S and C-S-S-S rectangular plates are examined, and the results obtained are in a good qualitative and quantitative agreement with the previous available works, based on various methods. In order to obtain explicit analytical solutions for the first non-linear mode shapes of C-S-C-S RP² and C-S-S-S RP, which are expected to be very useful in engineering applications and in further analytical developments, the improved version of the semi-analytical model developed by El Kadiri et al. For beams and fully clamped rectangular plates, has been slightly modified, and adapted to the above cases, leading to explicit expressions for the higher basic function contributions, which are shown to be in a good agreement with the iterative solutions, for maximum non-dimensional vibration amplitude values up to 0.75 and 0.6 for the first non-linear mode shapes of C-S-C-S RP and C-S-S-S RP, respectively.     

A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

基于电力线载波与TCP/IP协议的刚体转动惯量实验系统的设计

介绍了一种新的测量刚体转动惯量的实验方法与实验装置,在实验中,通过增加标准刚体试件,把细线拉力对转轴摩擦力矩的影响考虑进去,大幅度地提高了实验测试精度,另外,利用电力线载波通讯网络,将转动惯量测量仪采集的时间数据传输到PC机中,再经过PC机端数据处理软件,快速准确地将待测刚体的转动惯量以及其它与刚体有关的物理量计算、显...     

ERROR ESTIMATION FOR NUMERICAL METHODS USING THE ULTRA WEAK VARIATIONAL FORMULATION IN MODEL OF NEAR FIELD SCATTERING PROBLEM

In this paper, we investigate the use of ultra weak variational formulation to solve a wave scattering problem in near field optics. In order to capture the sub-scale features of waves, we utilize evanescent wave functions together with plane wave functions to approximate the local properties of the field. We analyze the global convergence and give an error estimation of the method. Numerical examples are also presented to demonstrate the effectiveness of the strategy.     

Commuting projections on graphs

Motivated by the increasing importance of large‐scale networks typically modeled by graphs, this paper is concerned with the development of mathematical tools for solving problems associated with the popular graph Laplacian. We exploit its mixed formulation based on its natural factorization as product of two operators. The goal is to construct a coarse version of the mixed graph Laplacian operator with the purpose to construct two‐level, and by recursion, a multilevel hierarchy of graphs and associated operators. In many situations in practice, having a coarse (i.e., reduced dimension) model that maintains some inherent features of the original large‐scale graph and respective graph Laplacian offers potential to develop efficient algorithms to analyze the underlined network modeled by this large‐scale graph. One possible application of such a hierarchy is to develop multilevel methods that have the potential to be of optimal complexity. In this paper, we consider general (connected) graphs and function spaces defined on its edges and its vertices. These two spaces are related by a discrete gradient operator, ‘Grad’ and its adjoint, ‘ ? Div’, referred to as (negative) discrete divergence. We also consider a coarse graph obtained by aggregation of vertices of the original one. Then, a coarse vertex space is identified with the subspace of piecewise constant functions over the aggregates. We consider the ?₂‐projection Q_H onto the space of these piecewise constants. In the present paper, our main result is the construction of a projection π_H from the original edge‐space onto a properly constructed coarse edge‐space associated with the edges of the coarse graph. The projections π_H and Q_H commute with the discrete divergence operator, that is, we have Div π_H = Q_H div. The respective pair of coarse edge‐space and coarse vertex‐space offer the potential to construct two‐level, and by recursion, multilevel methods for the mixed formulation of the graph Laplacian, which utilizes the discrete divergence operator. The performance of one two‐level method with overlapping Schwarz smoothing and correction based on the constructed coarse spaces for solving such mixed graph Laplacian systems is illustrated on a number of graph examples. Copyright © 2013 John Wiley & Sons, Ltd.     

Imposing symmetry in augmented linear systems

This paper discusses the methods of imposing symmetry in the augmented system formulation (ASF) for least‐squares (LS) problems. A particular emphasis is on upper Hessenberg problems, where the challenge lies in leaving all zero‐by‐definition elements of the LS matrix unperturbed. Analytical solutions for optimal perturbation matrices are given, including upper Hessenberg matrices. Finally, the upper Hessenberg LS problems represented by unsymmetric ASF that indicate a normwise backward stability of the problem (which is not the case in general) are identified. It is observed that such problems normally arise from Arnoldi factorization (for example, in the generalized minimal residual (GMRES) algorithm). The problem is illustrated with a number of practical (arising in the GMRES algorithm) and some ‘purpose‐built’ examples. Copyright © 2014 John Wiley & Sons, Ltd.     

具有弱对称应力的线弹性方程的稳定化格式

利用稳定化方法讨论拉格朗日乘子法得到的具有弱对称应力的线弹性问题. 用线性元和分片常数分别逼近变分问题的应力和位移. 并通过添加稳定项$G_1(\cdot,\cdot)$, $G_2(\cdot,\cdot)$和$G_3(\cdot,\cdot)$ 使相应混合离散变分问题满足弱BB条件. 接着详细研究了变分问题的解与稳定混合有限元解之间的误差估计,最后用两个数值算例验证理论分析的有效性.