基于J-C本构模型的Comp.B炸药落锤冲击数值模拟

为研究Comp.B炸药在惯性冲击下的力学响应特性, 基于Johnson-Cook本构模型, 对 点火前的Comp.B炸药大落锤(400kg)冲击实验进行了数值模拟. 在不同应力加载条件下模 拟计算得到了用状态方程和不用状态方程的$\sigma$-$t$曲线, 对比应力峰值、应 力上升时间等主要力学参数, 结果表明考虑了状态方程的数值模 拟结果与实验吻合最好, 可以很好地模拟炸药惯性冲击下的力学响应.     

有关常数项级数的几个典型例题

通过实例考察常数项级数收敛和发散时一般项的一些特点,并讨论级数不满足比值判别法、根值判别法或莱布尼茨定理的条件时的收敛性问题.     

Dynamic-mechanical analysis of the photo-degradation of long glass fibre reinforced polypropylene: Mechanical properties' changes

Polypropylene matrix composites, with different degrees of reinforcement with long glass fibres, are employed in different fields of the industry, such as aeronautics or automotive. Samples of the material were exposed to artificial accelerated photo-ageing in UV chamber (Heraeus Xenotest 150S). Their high content of glass fibres causes a surface degradation that can seriously affect mechanical properties. Therefore, dynamic mechanical and tensile tests were carried out in order to compare the changes of the properties with exposure time. These modifications are accompanied with microscopic changes in the crystallinity as can be seen in the thermal analysis experiments.     

Productions of X(1835) as baryonium with sizable gluon content

X(1835) has been treated as a baryonium with sizable gluon content, and to be almost flavor singlet. This picture allows us to rationally understand X(1835) production in J/ψ radiative decays, and its large couplings with pˉ, η^′ππ. The processes ϒ(1S) → γX(1835) and J/ψ → ωX(1835) have been examined. It has been found that Br(ϒ(1S) → γX(1835))Br(X(1835) → pˉ) < 6.45×10^-7, which is compatible with CLEO's recent experimental result (Phys. Rev. D 73, 032001 (2006) hep-ex/0510015). The branching fractions Br(J/ψ → ωX(1835)), Br(J/ψ → ρX(1835)) with X(1835) → pˉ and X(1835) → η^′π⁺π^- have been estimated by the quark-pair creation model. We show that they are heavily suppressed, so the signal of X(1835) is very difficult, if not impossible, to be observed in these processes. The experimental checks for these estimations are expected. The existence of the baryonium nonet is conjectured, and a model-independent derivation of their production branching fractions is presented.     

Upper limit on the flux of gravitational wave bursts

Summary The data obtained with three highly sensitive gravitational wave antennas have been used to establish an improved observational upper limit on the flux of impulsive gravitational waves. Preliminary results under the assumption of a source located in the center of the Galaxy are also reported. To speed up publication, the proofs were not sent to the authors and were superised by the Scientific Committee.     

Radiation induced effects on particulate composites from epoxy resin and fly-ash

In this paper gamma-radiation damages and effects on an epoxide matrix and on its particulate composite with coal fly ash have been studied; the curing of both formulations was carried out at room temperature by means of tetraethylenepentamine and of a tailored polyalkylenepolyaminophenolic product. The change on mechanical properties following the irradiation in air at room temperature has been tested as a function of the total absorbed dose. The chemical modification induced by the ionizing radiation on the matrices have been investigated by means of infrared spectrophotometry and differential scanning calorimetry. The high radiation resistance of the matrix and above all of the particulate composite suggests its use for the confinment of low and medium activity radwastes (nuclear or medical).     

逐步增加的Ⅱ型截尾下系统可靠性的Bayes分析及寿命预测

在逐步增加的型截尾模型下,研究部件寿命服从双参数指数分布的冷贮备串联系统可靠性指标的Bayes估计及单样本场合未来观测值的预测问题.在两个参数均未知的情形下,分别在平方损失(SE)、LINEX损失和熵(General Entropy,GE)损失函数下给出两个参数及可靠性指标的Bayes估计,对于超参数的确定,给出一种新的方法;并讨论了单样本场合未来观测值的预测问题,给出预测分布及预测区间;最后利用随机模拟方法进行比较,并对结果进行了讨论.     

TESTING DIFFERENT CONJUGATE GRADIENT METHODS FOR LARGE—SCALE UNCONSTRAINED OPTIMIZATION

In this PaPer we test different conjugate gradient (CG) methods for solving large-scale unconstrained optimization problems.The methods are divided in two groups:the first group includes five basic CG methods and the second five hybrid CG methods.A collection of medium-scale and large-scale test problems are drawn from a standard code of test problems.CUTE.The conjugate gradient methods are ranked according to the numerical results.Some remarks are given.     

Preliminary High Heat Flux Tests of Small-Scale Be/Cu Mock-Ups

China, as one of the members of ITER （international thermonuclear experimental reactor） project, one of the most important construction tasks is the fabrication of the first wall panel and shield blankets, which is the key engineering technology of ITER construction and might be one of the crucial issues of the future reactor too. Since 2004, an associated research team including Southwestern Institute of Physics （ SWIP ）, Ninxia Non-ferrous Metal Co. Itd and Chinese Institute of Engineering Physics, as well as Nuclear Power Institute of China has been established. Up to now, several series of interlayer for hot isostatic press （ HIP ） connection of beryllium and CuCrZr alloy have been tested. They are titanium film or coating, Cu coating and Al or AISiMg alloy etc. The bonding strength （tensile or shear strength ） of HIPed Be/Cu joints is up to 100 MPa.