All Solid‐State pH Electrode Based on Titanium Nitride Sensitive Film

Titanium nitride was used as pH‐sensitive material to fabricate all solid‐state pH electrode. The fabrication and the response performance of the pH electrode were described in the paper. The TiN film electrode showed a linear response in the pH range of 2–12 with a near‐Nenstian response (?55 mV/pH). The response time was within 1 min, and the electrode had good reproducibility, stability and low sensitivities for different species. Compared with the glass pH electrode, the electrode exhibited some advantages, for example, without activation, rapid response and high mechanical strength. In addition, the electrode performed excellently in a corrosion medium containing F^?(1 M). Electrochemical behaviors of TiN electrode in Britton‐Robinson buffers were studied with Electrochemical Impedance Spectroscopy (EIS).     

Electron capture detector performance parameters in view of the response presentation forms

Summary Four most frequently used presentation forms of the ECD response are described. Equations describing the dependence of the sensitivity, linearity and minimum detectable concentration of the ECD working under constant frequency mode of operation on the pulse period are derived from Wenthworth’s kinetic model for all four forms mentioned above. The forms presented are compared on the basis of equations derived. Results of the calculations are given and some predictions are experimentally tested for sulphur hexafluoride. Good agreement was found between the predicted and observed relationships. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

STUDIES ON PREPARATION OF INACTIVATED VACCINES FROM CELL CULTURES OF MINK ENTERITIS VIRUS (MEV) AND THEIR IMMUNITY

In this paper, superhigh reproductive rate strains of MEV with titre more than HA8192* or TCID50 log9.7 10 have been achieved both by cultivation in cell lines with different susceptibility to MEV and by isolating and identifying in field by the author. The systematic tests proved that S18 and L12 strains of MEV are the best strains for vaccine preparation. In this study, the best means for the tissue cultivation of MEV and the most advanced technological process for the production and detection of serum-free cell-cultured MEV fluids with super-high HA titre in batches in large quantities have been established for the first time. Optimum conditions for MEV inactivation were determined, and safe and effective inactivated vaccines with mineral oil or A1(OH)3 gel adjuvant were successfully prepared with serum-free cell-cultured MEV fluids. Both vaccines with different adjuvants can be manufactured in batches in large quantities and have been widely used all over China since 1986. The change laws of the imm     

Effect of enzyme concentration on the dynamic behavior of a membrane-bound enzyme system

The dynamic behavior of the reaction-diffusion system, composed of glucose oxidase (EC 1.1.3.4) immobilized at a uniform concentration in a membrane, used as a glucose electrode is represented by a diffusion equation with a nonlinear reaction-term in one-dimensional space. The mathematical model is analyzed by computer simulation, that is, numerical integration of the equation under various initial and boundary conditions, to examine the effect of enzyme concentration on the response characteristics (responsiveness and linearity in response) of the electrode. The analysis of the responses of the system to stepwise changes in the boundary value (glucose concentration in simple solution) infers that the enzyme concentration governs the patterns of the spatial distributions of the substrates (glucose and dissolved oxygen) in steady states and transient responses. It is also revealed that the response characteristics of the electrode are optimized with concentration of immobilized enzyme and that the system establishes the steady states at the same spatial distributions of the substrates, regardless of the boundary value. The diffusion of the substrates and the oxygen concentration also have significant effects on the response characteristics of the electrode.     

Effects of fluorine atoms on the optical nonlinear response of stilbene derivatives

The effect of fluorine atoms on the second-order optical nonlinear response of 4-nitro-4′-methoxy-trans-stilbene and polyene derivatives containing up to three double bonds (n=1, 2, 3) has been investigated within a semiempirical context (PM3 Hamiltonian). Experimental data reported in literature indicate a β_vec(SHG) value of 34, 47 and 76 (×10⁻³⁰ esu) for n=1, 2, 3, respectively, at 0.65 eV in CHCl₃ solutions. Our calculations show that fluorinating the nitrophenyl group the β_vec(SHG) is doubled. Further increase in the second-order nonlinear response can be obtained fluorinating the CC bond linkers between the aromatic moieties.Besides, the effect of different donor-acceptor pairs has been studied and the results interpreted in the two-state model context.Some results concerning the third-harmonic generation (THG), γ (THG), are presented, and a possible interpretation proposed.     

Development of a systems analysis approach for resolving the structure of biodegrading soil systems

An experimental and mathematical method is developed for the microbial systems analysis of polyaromatic hydrocarbon (PAH)-degrading mixed cultures in PAH-contaminated “town gas” soil systems. Frequency response is the primary experimental and data analysis tool used to probe the structure of these complicated systems. The objective is to provide a fundamental protocol for evaluating the performance of specific mixed microbial cultures on specific soil systems by elucidating the salient system variables and their interactions. Two well-described reactor systems, a constant volume stirred tank reactor (CSTR) and a plug flow differential volume reactor, are used in order to remove performance effects that are related to reactor type as opposed to system structure. These two reactor systems are well-defined systems that can be described mathematically and represent the two extremes of one potentially important system variable, macroscopic mass transfer. The experimental and mathematical structure of the protocol is described, experimental data is presented, and data analysis is demonstrated for the stripping, sorption, and biodegradation of napththalene.     

Analysis of polynuclear aromatic hydrocarbons by glass capillary gas chromatography using simultaneous flame ionization and electron capture detection

The possibility of simultaneous application of an electron capture (ECD) and a flame ionization detector (FID) connected to a glass capillary column for analyzing polynuclear aromatic hydrocarbons (PNA) has been investigated. The ECD/FID ratio is determined for 46 PNA compounds. The ratios vary from 0.02 to 117 with relative standard deviations better than 20 percent determined from 10 replicate analyses. The results suggest that the method may be used for obtaining additional evidence in identifying PNA in environmental samples. Impurities and transformation products in the standard were identified by computerized glass capillary gas chromatography/mass spectrometry. Quinones and diones are responsible for the high EC-response determined in some trace components in the standard. An application of the method is shown for PNA from particulates in urban atmospheres.     

纳米稀土-介质薄膜光电发射光谱和能带结构

用真空蒸发沉积的方法制备了纳米稀土(La、Nd、Sm)粒子 BaO介质薄膜.研究表明薄膜的光电发射光谱响应阈值受纳米稀土粒子形状和大小的影响,球形纳米稀土(Sm)粒子 BaO介质薄膜的光谱响应阈值波长为720 nm,条状纳米稀土(La和Nd)粒子 BaO介质薄膜阈值波长分别为650 nm和660 nm.研究得到纳米稀土粒子 介质薄膜等效界面位垒高度在1.7～2.0 eV之间.由于纳米稀土粒子与BaO介质各自逸出功不同,当构成薄膜后使得纳米粒子周围的空间电荷分布发生变化,纳米粒子周围的能带发生弯曲.     

H2S-sensing properties of SnO2 produced by ball milling and different chemical reactions

In this work, the mechanochemical synthesis of a moderately agglomerated tin oxide (SnO₂) powders and the subsequent preparation of semiconductor gas sensors as prototypes, were studied. Tin (II) chloride (SnCl₂) powder was milled with calcium hydroxide (Ca(OH)₂) and potassium carbonate, (K₂CO₃) powder, respectively, in a ball mill at room temperature and in an air atmosphere. Heat treatment of milled mixtures at 400 °C resulted in the formation of a tetragonal phase, confirmed by X-ray diffraction (XRD). During milling in the presence of water, a high number of hydroxide (OH) groups are formed at the surface. When SnCl₂ was milled with K₂CO₃, no water was produced and the Fourier-transform infrared spectrum (FT-IR) of the powder has no surface hydroxyl deformations. On exposure to hydrogen sulfide (H₂S) gas, the particles, prepared from anhydrous powder, have higher sensitivity than these, prepared from hydrated powder. The SnO₂ thick film, prepared from anhydrous powder may be successfully applied to a H₂S gas sensor.     

A new dodecylsulfate-selective supported liquid membrane electrode based on its N-cetylpyridinium ion-pair

A supported liquid and a poly(vinyl chloride) (PVC)-based membrane selective for dodecylsulfate (DS⁻) ion are described. The active element is a membrane containing a dissolved ion association complex of DS⁻ with cetylpyridinium (CP⁺) cation. The supported liquid membrane electrode (acetophenone as solvent) showed a Nernstian response towards the DS⁻ anion over the concentration range of sodium dodecylsulfate (SDS) from 8.3×10⁻³ to 1.0×10⁻⁶ mol dm⁻³ at 25 °C. The proposed electrode also showed a super-Nernstian potential response (108±2 mV decade⁻¹) at low concentrations (1.0×10⁻⁹ to 1.0×10⁻⁶ mol dm⁻³). Moreover, this electrode showed good selectivity and precision (R.S.D.?2.0%), and was usable within the pH range 4.0-6.8. The proposed electrode revealed a lower limit of detection of 6.3×10⁻⁷ mol dm⁻³ and improved selectivity in comparison with the some previously reported DS⁻ ion selective electrodes. The isothermal temperature coefficient of this electrode amounted to −0.001 V °C⁻¹. The liquid membrane electrode may find application in the direct determination of SDS by the standard addition method at pH 5.0, and in the physicochemical studies of surfactant solutions.