Characteristics of Friedel pairs and diffraction contrast tomography with non‐perpendicular rotation axis

The characteristics of Friedel pairs in diffraction contrast tomography (DCT) are studied in the condition that the rotation axis of the sample is not exactly perpendicular to the incident X‐ray direction. For the rotation axis approximately aligned along the vertical direction, the Friedel pairs close to the horizontal plane are insensitive to the non‐perpendicularity of the rotation axis, and can be used to refine the sample‐to‐detector distance and X‐ray energy, while the Friedel pairs close to the vertical direction are sensitive to the non‐perpendicularity of the rotation axis, and can be used to determine the rotation axis orientation. The correct matching proportion of Friedel pairs decreases with increasing non‐perpendicularity of the rotation axis. A method of data processing considering rotation axis misalignment is proposed, which significantly increases the correct matching and indexing proportions of the diffraction spots. A pure aluminium polycrystalline sample is investigated using DCT at beamline 4W1A of Beijing Synchrotron Radiation Facility. Based on the analysis of Friedel pairs, the sample‐to‐detector distance and X‐ray energy are refined to be 8.67 mm and 20.04 keV, respectively. The non‐perpendicular angle of the rotation axis is calculated to be 0.10°. With these refined geometric parameters, the matching proportion of the spatial position of diffraction spots is 90.62%. Three‐dimensional reconstruction of the sample with 13 grains is realised using the algebraic reconstruction technique. It is demonstrated that the precise correction of the orientation of the sample rotation axis is effective in DCT suffering from rotation axis misalignment, and the higher accuracy in determining the rotation axis is expected to improve the reconstruction precision of grains.     

遥感傅里叶变换红外光谱的大气层析技术

遥感傅里叶变换红外光谱层析技术是一项新的气体分析技术，它可用于构造气体浓度峰图形，定量分析工业污染气体总释放量等方面，随着算法的不断优化，在重构气体在空间的分布方面，遥感傅里叶变换红外光谱层析技术正在不断成长。     

浓度场测量的差分吸收光谱CT技术

提出了一种新的用于浓度场测量的差分吸收光谱CT技术。利用差分吸收原理进行浓度场多方位积分测量,采用少数投影最大熵重建算法进行层析图像重建。数值模拟结果表明,在0°～180°视场范围内,在4个不同的投影视角方向获取投影数据的条件下,能有效地重建出待测场分布。该技术具有较高的重建精度和良好的抗噪声性能。     

三维电阻抗成像的体积元方法的数值模拟和分析

电阻抗成像是一类椭圆方程反问题,本文在三维区域上对其进行数值模拟和分析.对于椭圆方程Neumann边值正问题,本文提出了四面体单元上的一类对称体积元格式,并证明了格式的半正定性及解的存在性;引入单元形状矩阵的概念,简化了系数矩阵的计算;提出了对电阻率进行拼接逼近的方法来降低反问题求解规模,使之与正问题的求解规模相匹配;导出了误差泛函的Jacobi矩阵的计算公式,利用体积元格式的对称性和特殊的电流基向量,将每次迭代中需要求解的正问题的个数降到最低.一系列数值实验的结果验证了数学模型的可靠性和算法的可行性.本文所提出的这些方法,已成功应用于三维电阻抗成像的实际数值模拟.     

An algorithm for computed tomography image reconstruction from limited-view projections

<正>With the development of the compressive sensing theory,the image reconstruction from the projections viewed in limited angles is one of the hot problems in the research of computed tomography technology.This paper develops an iterative algorithm for image reconstruction,which can fit most cases.This method gives an image reconstruction flow with the difference image vector,which is based on the concept that the difference image vector between the reconstructed and the reference image is sparse enough.Then the l_2-norm minimization method is used to reconstruct the difference vector to recover the image for flat subjects in limited angles.The algorithm has been tested with a thin planar phantom and a real object in limited-view projection data.Moreover,all the studies showed the satisfactory results in accuracy at a rather high reconstruction speed.     

基于拉锥结构的全光纤型内窥OCT探针研究

本文报道了一种基于拉锥结构的全光纤型内窥光学相干层析成像探针. 基于大纤芯多模光纤的低光束发散特性, 使用大纤芯多模光纤代替透镜作为成像元件, 并在单模光纤与大纤芯多模光纤之间引入过渡拉锥段以减少插入损耗. 首先利用光学仿真软件(Rsoft)确定探针的最佳结构, 然后通过拉锥、切割以及熔接工艺实现探针制作, 并对探针的出射光束特性与插入损耗进行测量, 最后将该探针与扫频光学相干层析成像主系统联机, 对人体指尖皮肤及鸡气管壁组织进行成像. 该探针直径为250 μm, 不锈钢保护管外径为325 μm, 硬端长度1 cm, 插入损耗约为0.3 dB, 空气中有效成像范围达800 μm. 该探针为内窥光学相干层析成像技术在心血管疾病的应用提供了高紧凑度、高传输效率与高灵活性的选择.     

Numerical simulation and analysis of generalized difference method on triangular networks for electrical impedance tomography

Electrical impedance tomography is an inverse problem of elliptic differential equations. Numerical methods based on combining generalized difference method and Levenberg–Marquardt iteration on a planar domain are proposed. Positive semi-definiteness and existence of solution of the generalized difference scheme are proved. Element geometry matrix is introduced to shortcut calculation and standardize computer program. A series of numerical experiments verify the reliability of its mathematical model and the feasibility of the algorithm. A class of electrical current patterns is proposed to minimize the number of direct problems to be solved in each iteration. These methods have been applied successfully in practical simulation of electrical impedance tomography.     

基于广义逆算法的冲击波超压场重建方法

针对局部布点测试不能全面了解冲击波传播过程的不足,以及冲击波超压经验公式的局限性,采用网络化测试技术获取冲击波信号,以计算机层析成像技术为基础,利用加权广义逆反演算法对爆炸冲击波速度场进行反演,根据峰值超压与速度的关系得到峰值超压场分布。经一定测试范围内实验验证,峰值超压重建结果优于经验公式计算结果。     

A qualitative study on the pulsatile flow phenomenon in a dense fly ash pneumatic conveyor

Understanding of the dynamic particulate flow structures within a dense gas-fly ash pneumatic conveyor must be improved in order to better aid its design guidance.The complex pulsatile movement of the gas-fly ash mixture dominates the flow performance within the pipeline,and historically,non-invasive measurement devices such as the electrical capacitance tomography（ECT） were often used to sufficiently capture the flow dynamics.However,inadequate studies have been conducted on the pulsatile flow phenomenon,which directly relate to the gas-fly ash two-phase flow performance.This paper aims to investigate the pulsatile flows using an ECT device.Initially,pulsatile flow patterns under various experimental conditions were obtained through ECT.Pulses within a flow were then characterised into pulse growth and decay segments,which represent the superficial fluidisation and deaeration processes during conveying.Subsequently,structural and statistical analyses were performed on the pulse growth and decay segments.Results suggested that the increasing air mass flow rate led to the decrease of the superficial fluidisation/deaeration magnitude,however,the increase of the superficial fluidisation/deaeration durations.Also,the air mass flow rate was indicated as the dominant factor in determining the pulsing statistical parameters.This research provides fundamental insights for further modelling the dense fly ash pneumatic flows.     

Time‐resolved in situ tomography for the analysis of evolving metal‐foam granulates

An experimental setup has been developed that allows for capturing up to 25 tomograms s^?1 using the white X‐ray beam at the experimental station EDDI of BESSY II, Berlin, Germany. The key points are the use of a newly developed, precise and fast rotation stage, a very efficient scintillator and a fast CMOS camera. As a first application, the foaming of aluminium alloy granules at 923 K was investigated in situ. Formation and growth of bubbles in the liquid material were observed and found to be influenced by the limited thermal conductivity in the bulk granules. Changes that took place between two tomographic frames separated in time by 39 ms could be detected and analysed quantitatively.