利用252 Cf快裂变室测量BC501A液闪探测器的相对探测效率和响应函数

本文利用²⁵²Cf快裂变室和多参数数据采集系统,逐事例的同时记录了自发裂变中子和瞬发伽马的飞行时间(TOF),脉冲形状甄别(PSD)和反冲能量(RE,裂变中子是通过测量反冲质子;瞬发伽马是通过测量康普顿反冲电子)三维信息.详细介绍了通过离线数据分析完全扣除三维信息中的伽马事例贡献,以获得Φ50.8 mm×50.8 mm的BC501A液闪探测器的相对探测效率和响应函数的方法.在不通过探测器响应函数进行数据转换的条件下,利用中子的能量直接确定了中子的有效测量阈值.得到的中子 关键词： 252Cf快裂变室')" href="#">²⁵²Cf快裂变室 BC501A液闪探测器 相对探测效率 响应函数     

光学外差探测信噪比研究

对于光学外差探测系统而言,为了有效利用回波信号,需要对信噪比这一表征系统性能的重要指标进行研究。从理论分析了信噪比,给出了计算信噪比的一般公式。理论分析表明,当探测器光敏面上本振光与信号光的振幅、相位、偏振都满足严格的匹配时,外差效率最大。对场分布为艾里函数的光外差信噪比进行研究和数值模拟。结果表明,当艾里斑尺寸的比例系数控制在0.8~1.2内,并使信号光斑主轴偏移量x0控制在0.5以下,探测器的尺寸在(0.6~0.8)λf/d内时,可获得大于0.7ηPs/hνB的信噪比。     

基于菲聂尔透镜的聚焦太阳能PV/T 系统热电性能研究

本文建立了基于菲涅尔透镜的聚焦型PV/T热电联产系统的一维稳态传热模型,对六种不同结构的PV/T系统的热、电效率和(火用)效率进行了计算,利用(火用)效率作为评价标准对六种系统进行了比较.分析表明采用聚焦型PV/T系统,在牺牲少量发电效率的基础上,可以获得具有一定温度的热能;增添玻璃盖板虽然能够减少热损失,但同时使得系统的光学效率降低,减少电池上的能量密度,反而使得系统的(火用)效率降低1%;环境恶劣的情况下,应将集热管外加保温腔体,透镜起到盖板和聚光器的双重作用,在不损失发电量的同时可以提高系统的热效率.     

高衍射效率衍射望远镜系统的设计/加工及成像性能测试

为提高衍射效率,设计并制作了口径为300mm的衍射成像系统.该系统的物镜是由一块四台阶位相型菲涅尔波带片通过激光直写套刻和Ar离子束物理刻蚀技术在石英玻璃基板上加工而成.测试了衍射物镜的衍射效率,实验结果表明:衍射物镜在波长632.8nm处的衍射效率为66.4%,达到理论值的82%.搭建了衍射成像系统光路,分别采用10μm星点孔与分辨率板,测试了系统的成像性能.实验测得星点像直径为44μm,分辨率板的极限分辨率达到84lp/mm,接近该系统的理论计算值,表明该衍射成像系统具有较好的成像性能.     

Track revelation and optical properties of pentaerythritol tetrakis (allyl carbonate) plastic for application as nuclear track detector: effects of gamma radiations

The etching conditions of an indigenously prepared thin film of pentaerythritol tetrakis(allyl carbonate) (PETAC) were standardised for the use as a nuclear track detector. The optimum etching times in 6?N NaOH at 70°C for the appearance of fission and alpha tracks recorded in this detector from a ²⁵²Cf solid source were found to be 30 min and 1.50?h, respectively. The experimentally determined values for the bulk and track-etch rates for this detector in 6?N NaOH at 70°C were found to be 1.7?±?0.1 and 88.4?±?10.7?µm/h, respectively. From these results, the important track etching properties such as the critical angle of etching, the sensitivity and the fission track registration efficiency were calculated and compared with the commercially available detectors. The activation energy value for bulk etching calculated by applying Arrhenius equation to the bulk etch rates of the detector determined at different etching temperatures was found to be 0.86?±?0.02?eV. This compares very well with the value of about 1.0?eV reported for most commonly used track detectors. The effects of gamma irradiation on this new detector in the dose range of 200–1000?kGy have also been studied using bulk etch rate technique. The activation energy values for bulk etching calculated from bulk etch rates measurements at different temperatures were found to decrease with the increase in gamma dose indicating scission of the detector due to gamma irradiation. The optical band gap of this detector was also determined using UV–visible spectrometry and the value was found to be 4.37?±?0.05?eV.     

高亮度白光LED用外延片的新进展

文章首先介绍了发光二极管（LED）的内量子效率、外量子效率的基本概念和提高量子效率的基本方法,接着对LED外延的结构和方法做了简要介绍.文章的第三和第四部分则着重介绍了提高内、外量子效率的外延方法,这些方法包括外延结构的优化,侧向外延生长,SiC和GaN衬底的生长,AlInGaN四元系有源区生长,非极性面、半极性面的外延,表面粗化结构生长,图形化二次外延结构.图形化蓝宝石衬底上的外延,提高载流子注入效率的结构和组分设计.文章的第五部分则介绍了基于可靠性和成本考虑的其他新型外延结构,第六部分介绍了提高LED     

KTP(001)晶体分光性能研究

根据同步辐射光源对软X射线分光晶体的性能要求,分析了软X射线能区常用分光晶体的性能优劣,指出对于晶格常数值大的分光晶体,KTP(KTiOPO₄)(011)是该能区比较理想的分光晶体. 同时提出了一种利用同步辐射光源测量晶体衍射效率的实验方法,指出光源的发散度与晶体的衍射效率密切相关. 测量了KTP(011)晶体的晶格常数,给出了KTP(011)晶体的实测衍射效率. 关键词： 同步辐射 KTP(011)晶体 衍射效率 光源发散度     

重离子辐射提高腺病毒介导小鼠黑色素瘤细胞转染率的研究

探讨12C6+ 离子束辐射对用带有绿色荧光蛋白基因的缺陷性腺病毒（AdCMV GFP）转染小鼠黑色素瘤细胞(B16细胞系)的影响。 采用不同剂量的12C6+ 重离子束辐射经AdCMV GFP 转染的B16细胞， 利用流式细胞仪检测腺病毒的转染率。 结果表明， 12C6＋重离子束辐射能提高腺病毒对B16细胞的转染率， 且具有量效关系。 此外， 先转染后辐射法比起先辐射后转染法能更显著地提高转染率。The effect of 12C6+ beam irradiation on AdCMV GFP (a replication deficient recombinant adenoviral vector containing CMV promoter and green fluorescent protein) gene transfection efficiency for murine melanoma cell B16 has been investigated. B16 cells infected with AdCMV GFP were irradiated by different doses of 12C6+ beam. The transfection efficiency was assessed by flow cytometry (FCM). Results show that 12C6+ beam irradiation can improve tansfection efficiency of AdCMV GFP on murine melanoma cell B16 in a dose dependent manner. In addition， the tansfection efficiency in pre tranfection plus irradiation group is higher than that in pre irradiation plus tranfection group at the same dose irradiation dose.     

低能量阈高纯锗探测器用于暗物质探测实验研究

一个位于韩国江原道襄阳郡地下实验室的暗物质WIMP探测实验中, 采用了低能量阈高纯锗探测器, 带有碘化铯晶体反符合探测器作为主动屏蔽体. 整个系统设置和能量标定已经完成, 并且已经积累了约155d的本底数据. 还应用外置伽玛源和中子源进行了实验, 以判断本底的来源. 介绍了数据的分析和初步结果, 并给出了实验诱人的前景.     

Emission features of Ho ion in Nb2O5, Ta2O5 and La2O3 mixed Li2O-ZrO2-SiO2 glasses

Li₂O-ZrO₂-SiO₂: Ho³⁺ glasses mixed with three interesting d-block elemental oxides, viz., Nb₂O₅, Ta₂O₅ and La₂O₃, were prepared. Optical absorption and photoluminescence spectra of these glasses have been recorded at room temperature. The luminescence spectra of Nb₂O₅ and Ta₂O₅ mixed Li₂O-ZrO₂-SiO₂ glasses (free of Ho³⁺ ions) have also exhibited broad emission band in the blue region. This band is attributed to radiative recombination of self-trapped excitons (STEs) localized on substitutionally positioned octahedral Ta⁵⁺ and Nb⁵⁺ ions in the glass network. The Judd-Ofelt theory was successfully applied to characterize Ho³⁺ spectra of all the three glasses. From this theory various radiative properties, like transition probability A, branching ratio β_r and the radiative lifetime τ_r, for ⁵S₂ emission levels in the spectra of these glasses have been evaluated. The radiative lifetime for ⁵S₂ level of Ho³⁺ ions has also been measured and quantum efficiencies were estimated. Among the three glasses studied the La₂O₃ mixed glass exhibited the highest quantum efficiency. The reasons for such higher value have been discussed based on the relationship between the structural modifications taking place around the Ho³⁺ ions.