Designing an effective federal biomass program

This article addresses two questions: Has the effectiveness of the US governments federal research and development (R&;D) spending suffered from the post-1980 strategic change from freely shared and publicly owned to privately owned scientific advances? What criteria would a federal R&;D program use to design a strategy that most effectively enhances the well-being of farmers and rural communities? Several studies found that the pre-1980 US Department of Agriculture research strategy was very effective. No comparable studies have analyzed the comparative effectiveness of the post-1980 strategy of restricting access to the results of public research. Recent experience and several analytical studies suggest that to significantly enhance the health of rural economies from an expanded use of plant matter as an industrial material, federal policy should channel scientific and engineering research into small- and medium-sized production and processing technologies and should encourage farmer-owned, value-added enterprises.     

Communication Roles, Perceived Effectiveness, and Satisfaction in an Environmental Management Program

Earlier research has shown a relationship between various forms of structural centrality and perceived leadership and role satisfaction in small experimental groups. The limited amount of research on this topic in naturally occurring social networks has yielded results that often conflict with one another. Different results have generally been attributed to possible differences in task environments. This paper examines the relationship between two types of structural centrality and perceived influence, role satisfaction, and perceived effectiveness in an environmental resource management program. Findings in this paper suggest that the observed differences in relationships between the network and other variables is partly a function of global network properties (e.g., marginality of subgroups) and related task environments. This revised version was published online in August 2006 with corrections to the Cover Date.     

INTRAPARTICLE DIFFUSION EFFECTS IN FISCHER-TROPSCH SYNTHESIS Ⅰ. MODELING OF DIFFUSION AND REACTION

IntroductionCatal}ticrcactionsaffcctcdb}'diffosionaIlimitationincatal}'stporcshavcbccnextensive1}dcaltx`ithinlit.rat.rcll~5I.Scvcraltcchniqucsonthcspccialcase0fFischcr-Tropschs}'nthcsis(FTS)t\crcapplicdtocxplorcthebchaviorofthiscatal}ticrcactionundercxpcrimcntalandopcrationaIconditionsI3~5l.It`"ouldbeofvaluctoindicatchcrcthatthcseinvcstigationsx"ercmainl}'bascdonthesimplcstkineticsofthcfirstordcrinH2proposedbyAndersonl6]attheearIystages.However-thesetboents,striCtlyspeaking,areinvalidfor…     

Correlation of antioxidant depletion and mechanical performance during thermal degradation of an HTPB elastomer

Thermal degradation studies of a stabilized HTPB based elastomer were conducted at temperatures from 50 °C to 110 °C. The concentration of extractable antioxidant (AO2246) in the polymer was quantified via AO extraction and a gas chromatography-based method using internal standards. The decrease in extractable AO levels as a function of time and temperature was evaluated and correlated with mechanical property changes. Most importantly, AO depletion features were found to be temperature dependent. At elevated temperatures (>80 °C) extractable AO levels decreased rapidly and faster than the concurrent loss in mechanical properties. While extractable AO concentrations decrease quickly, the material is able to maintain some useful mechanical properties, perhaps via non-extractable or grafted AO species formed during degradation providing additional protection. At lower aging temperatures extractable or free AO levels decreased more slowly than the mechanical properties. Therefore, for condition monitoring purposes a universal correlation between AO levels and aging state or material condition could not be established. Most importantly, however, loss of mechanical properties and oxidative degradation is observed at lower temperatures despite significant levels of free antioxidant in the material. The antioxidant appears to be limited in its effectiveness to completely prevent degradation reactions, or only fractions of the total AO available are actually involved in the inhibition process.     

脉冲电场屏蔽效能测试系统及测试方法

 自主研制了一套小型脉冲电场屏蔽效能测试系统,该系统由脉冲电场发射设备和脉冲电场测试设备构成。脉冲电场发射设备的天线口面前60 cm处可产生峰值达7.5 kV/m的脉冲电场,测试设备的动态测试范围达97 dB。系统采用光纤测量设备,在测量工作中能有效抑制强电磁场干扰。采用Matlab编写自动测量及数据处理程序,实现了数据采集与处理自动化。实验测量了金属桥架、控制柜、屏蔽帐篷、导电水泥混凝土房的脉冲电场屏蔽效能,其脉冲电场峰值衰减量分别为52,64,66,30 dB。实验表明可用脉冲电场的峰值衰减量来评估屏蔽体的脉冲电场屏蔽效能。     

一类利用回归关系的计量指标抽样方案

在产品质量判定的抽样检验问题中,当目标指标需用破坏性试验才能得其值时,更为常用的是用非破坏性试验可得量值的协变指标量来预报它。但在产品抽样验收问题上,未能形成理论较为严密的方法,这是由于预报误差这个关键问题的处理尚未解决得好,即给不出抽样方案的功效计算的正确或是近似性较好的公式。本文通过建立合理的数学模型,把对目标指标的质量要求化为对协变指标量的统计要求,从而利用两者的回归关系,结合两种复杂的抽样方案,给出功效函数的计算公式和计算方法,并进行了分析。     

基于电磁拓扑的多腔体屏蔽效能快速算法

提出基于电磁拓扑理论计算开孔多腔体屏蔽效能的快速方法.首先给出双腔体等效电路和电磁拓扑信号流图,并推导孔缝节点处的散射矩阵,给出拓扑网络的散射矩阵方程和传输矩阵方程,获得双腔体的广义Baum-Liu-Tesche(BLT)方程.在此基础上研究了开孔三腔体,包括串型级联三腔体和串并型混合级联三腔体的广义BLT方程.对于串型级联三腔体,其电磁拓扑网络和广义BLT方程在双腔体基础上直接扩展即可获得.而对于串并型混合级联三腔体,通过将位于三腔体公共面上的孔缝等效为三端口网络节点,并根据三端口网络散射参数定义推导获得该节点的散射矩阵,最终得到串并型混合级联三腔体的广义BLT方程.本文方法对双腔体的计算结果与文献结果和实验结果相符合,对3组不同类型和尺寸开孔腔的屏蔽效能的计算结果与时域有限差分法计算结果符合较好.该算法不仅效率高,通过对所有计算结果和实验结果的误差统计分析,表明该算法具有较高的计算准确度.     

Electromagnetic interference shielding effectiveness and microwave absorption properties of thermoplastic polyurethane/montmorillonite‐polypyrrole nanocomposites

In this work, thermoplastic polyurethane‐filled montmorillonite‐polypyrrole (TPU/Mt‐PPy) was prepared through melt mixing process for using in electromagnetic shielding applications. The effect of conducting filler content and type, sample thickness, and X‐band frequency range on the electromagnetic interference shielding effectiveness (EMI SE) and EMI attenuation mechanism was investigated. A comparative study of electrical and microwave absorption properties of TPU/Mt‐PPy nanocomposites and TPU/PPy blends was also reported. The total EMI SE average and electrical conductivity of all Mt‐PPy.Cl or Mt‐PPy.DBSA nanocomposites are higher than those found for TPU/PPy.Cl and TPU/PPy.DBSA blends. This behavior was attributed to the higher aspect ratio and better dispersion of the nanostructured Mt‐PPy when compared with neat PPy. Moreover, the presence of Mt‐PPy into TPU matrix increases absorption loss (SE_A) mechanism, contributing to increase EMI SE. The total EMI SE values of nanocomposites containing 30 wt% of Mt‐PPy.DBSA with 2 and 5 mm thickness were approximately 16.6 and approximately 36.5 dB, respectively, corresponding to the total EMI of 98% (75% by absorption) and 99.9% (88% by absorption). These results highlight that the nanocomposites studied are promising materials for electromagnetic shielding applications.     

纳米镍-铁合金/膨胀石墨复合材料的制备、表征及其电磁屏蔽性能

The composites with nano-particles of Ni-Fe alloys dispersed on the nano-layers of expanded graphite (EG) were prepared by the impregnation of EG with ethanol solutions of nickel and iron acetates， followed by drying and reduction in H₂. The square nano-particles of Ni-Fe alloys with particle sizes of mainly 20～40 nm were found to be well spread on the layers of EG. The alloy nano-particles exhibited high shielding effectiveness (SE) for electromagnetic radiations at low frequencies due to their high magnetic conductivity. Since EG is electronically conductive and displayed high SE at high frequencies， the composites exhibited good SE at wide range of frequencies. The electric and magnetic conductivities of the composites could be monitored through regulating the loadings of alloy nano-particles on EG， and it was found that the composites with 20%～40% of the alloys exhibited good SE. Specifically， the composite 27%Ni-3%Fe-EG showed the excellent SE from 66 to 110 dB at the frequencies from 300 kHz to 1.5 GHz.