基于AHP和DEA联用的城市交通环境可持续发展评价方法研究

将层次分析法(AHP)和数据包络分析(DEA)相结合构建了两种方法的联用评价模式,对使用该方法评价城市交通环境可持续发展水平和后续决策指导方面进行了探讨.该方法对AHP法在多个决策单元定量对比分析和DEA体现决策者偏好方面进行了改善.从影响城市交通环境可持续发展水平的城市综合发展、道路设施水平、交通运输功能和交通环境质量等方面出发,建立了城市交通环境可持续发展评价体系,并应用于深圳市实证分析,通过AHP分析认为深圳市2000～2007年城市交通环境可持续发展水平在波动中缓慢上升,再通过27个城市2005年数据DEA有效性分析和投影分析,得到深圳市在城市交通环境可持续发展方面的总体效率为0.9729,并得到了其要达到DEA有效的调整方案和部分政策建议.     

基于多重分形去趋势波动分析法的交通流多重分形无标度区间自动识别方法

无标度区间是时间序列在统计意义上存在分形自相似性的尺度范围,是交通流多重分形特征研究中的重要组成部分.为解决交通流多重分形研究中多重分形去趋势波动分析法(multi-fractal detrended fluctuation analysis,MF-DFA)缺乏有效识别无标度区间方法的问题,本文在分析算法过程中交通流波动函数对数曲线突变点性质的基础上,结合传统无标度区间识别方法的构建思想,建立基于MF-DFA算法的无标度区间自动识别方法.以北京市二环快速路外环方向的部分道路为例开展实例研究,通过与传统无标度区间识别方法的结果对比,验证新方法的有效性.研究结果表明:本文方法能自动识别交通流多重分形无标度区间,且稳定性好;案例研究可知交通流短时间内波动较小、自相似性较强,随着研究时间段变长、交通流波动逐渐变大,自相似性逐渐消失,进一步解释了交通流无标度区间的有限性.     

多路段元胞自动机交通流模型

在经典单路段元胞自动机交通流模型的基础上,将多个路段视为一个道路系统,提出并研究了多路段条件下的交通流问题.针对多路段道路的特点,通过引入车辆流入规则、路口随机慢化规则和路口车辆流入规则,控制车辆从上一路段流入下一路段.首先提出了"汽车池"的概念,来控制每一路口车辆的流入;然后通过路口随机慢化,来模拟路口对交通的影响;最后,当车辆离开时,依直行率进入下一路段,实现车流的继续流动.同时,通过数值模拟,仿真了不同条件下的交通情况,对重要参数进行了研究.结果表明,出现了混合流这一新的现象,拥堵地段与非拥堵地段间存在明显的界限.拥堵往往最先从路口开始,然后蔓延到整个路段.多路段道路还存在临界突变的特性.随着车辆流入概率的增大,路口对平均速度和车流密度的影响愈加明显.当流入概率超过一定阈值时,车辆缓慢地增加也会引起整体道路通行能力的迅速下降.     

Anodic Stripping Voltammetry of Heavy Metals at Nanocrystalline Boron‐Doped Diamond Electrode

Boron‐doped Diamond (BDD) electrode has become one of the important tools for heavy metal detection. By studying some analytical parameters of DPASV method, like deposition time and potential in different electrolyte concentrations (acetate buffer), the conditions for detecting very low metal ion levels (Zn, Cd, Pb, and Cu) could be chosen. Diluted electrolyte (0.01 M buffer) was one of the factors favoring low detection and quantification limits, but its quantification range is short in comparison to more concentrated media. For ?1.7 V deposition potential, the detection of single metal at ppb levels was reached in 60 s deposition time. Understanding different metal‐metal interactions shows the limits to the simultaneous determination of heavy metals at BDD. Quantification was possible for the simultaneous determination of Zn, Cd and Pb despite the overlapping of Zn and Cd peaks. The performance of the BDD was compared with that of another C‐based solid electrode: the glassy carbon electrode (without mercury plating). A lower base line current, wider potential range, higher sensitivity (3 to 5 times higher than GC) and longevity of the material were noticed for the BDD.     

Local-moment and itinerant antiferromagnetism in the heavy-fermion system Ce(Cu1−xNix)2Ge2

Elastic and inelastic neutron-scattering studies on the system Ce(Cu_1?xNi_x)₂Ge₂ are reported. These measurements are complemented by measurements of the magnetic susceptibility, high-field magnetization, heat capacity, thermal expansion, electrical resistivity and thermopower. The results reveal an interesting T-x phase diagram consisting of two different antiferromagnetic phases for x < 0.2 and 0.2 < x < 0.75, respectively, and a heavy-Fermi-liquid regime at higher Ni concentrations. The experimental results are interpreted in terms of an alloying-induced transition from local-moment to itinerant heavy-fermion magnetism. Fingerprints of this latter phase are a strongly reduced ordered moment and a short incommensurate ordering wave vector, in accord with theoretical predictions. A surprisingly good agreement between theory and experiment is found for x > 0.5. Further experimental evidence for different types of antiferromagnetic ordering derives from a line-shape analysis of the quasielastic neutron-scattering intensity, from magnetization and thermopower experiments.     

紫外-可见光谱法分析难溶性黄药重金属配合物

提出可用于难溶性黄药重金属配合物检测的紫外光谱方法。实验首先考察了在黄药溶液中加入不同重金属离子后紫外-可见光谱的变化,发现Pb2+、Cu2+会与黄药生成难溶性配合物,而Fe2+,Zn2+,Mn2+对黄药溶液的紫外吸收影响很小。接下来实验比较了不同孔径的滤膜对难溶性配合物的去除效果,发现采用0.22 μm滤膜可以有效的将黄原酸铜或黄原酸铅与滤液分离。进一步的,实验研究了硫化钠与难溶性配合物反应的情况,结果表明S2-可以定量的将配合物中的黄原酸根置换到溶液中。研究得出可以通过加入硫化钠后滤液中黄药浓度的上升值得到原水样中难溶性黄药重金属配合物的含量。最后研究将该方法应用于郴州三十六湾三家铅锌选矿厂废水的分析中,其结果验证了该方法的可行性。     

Pricing and distributed QoS control for elastic network traffic

We study a processor-sharing model in which users choose between a high- and a low-priority service, based on their utility functions and prices charged by the service provider. The latter aims at revenue maximization. The model is motivated by file transmissions in data networks with distributed congestion control.     

流量管理中信息重发问题的研究

信息重发在通信网络中广泛存在。通过对信息重发问题的研究，建立了概率模型，分析了信息到达流的各种性质，得到了到达间隔时间的分布及平均到达速率等重要性能指标，利用数值实验对理论结论进行了验证。所得结果对网络流量管理和拥塞控制有一定的参考价值。     

A Survivable Wavelength Division Multiplexing Passive Optical Network with Both Point-to-Point Service and Broadcast Service Delivery

Abstract

A survivable wavelength division multiplexing passive optical network enabling both point-to-point service and broadcast service is presented and demonstrated. This architecture provides an automatic traffic recovery against feeder and distribution fiber link failure, respectively. In addition, it also simplifies the protection design for multiple services transmission in wavelength division multiplexing passive optical networks.     

红色磷光喹喔啉铂(II)配合物及其有机电致发光器件的制备

利用2,3-二苯基喹喔啉和氯亚铂酸钾(K2PtCl4)反应,合成了一种新型喹喔啉铂的配合物(DPQ)Pt(acac),通过元素分析,1HNMR测定对配合物结构进行了表征,结果显示得到的是目标化合物.利用紫外光谱和荧光光谱对配合物进行了研究.利用该材料作为磷光染料制备了结构为ITO/NPB(21nm)/NPB∶7%(DPQ)Pt(acac)(17.5nm)/BCP(7nm)/Alq3(21nm)/Mg∶Ag(10∶1)(120nm)/Ag(10nm)的有机电致发光器件(OLED).结果表明,该配合物在442和485nm处存在单重态1MLCT(金属到配体的电荷跃迁)和三重态3MLCT的吸收峰;在632nm处有较强的金属配合物三重态的磷光发射;该器件的启动电压是5.0V,器件的最大亮度为1516cd·m-2,外量子效率为0.66%,流明效率为0.26lm·W-1,是一种红色磷光材料.