Flow-induced vibration in two-phase flow with wire coil inserts

Information of flow-induced vibration (FIV) in two-phase flow with wire coil inserts at atmospheric pressure, is presented in this study. FIV was measured in an upward vertical tube for four different wire coil inserts using an air–water mixture as process fluid. Vibration increased along with mass flux and quality. The narrower wire coils produced more vibration. The FIV prediction correlation for two-phase flow with wire coil inserts was experimentally developed with coefficient correlation value of 0.956.     

Numerical experiments with several variant WENO schemes for the Euler equations

Numerical experiments with several variants of the original weighted essentially non‐oscillatory (WENO) schemes (J. Comput. Phys. 1996; 126 :202–228) including anti‐diffusive flux corrections, the mapped WENO scheme, and modified smoothness indicator are tested for the Euler equations. The TVD Runge–Kutta explicit time‐integrating scheme is adopted for unsteady flow computations and lower–upper symmetric‐Gauss–Seidel (LU‐SGS) implicit method is employed for the computation of steady‐state solutions. A numerical flux of the variant WENO scheme in flux limiter form is presented, which consists of first‐order and high‐order fluxes and allows for a more flexible choice of low‐order schemes. Computations of unsteady oblique shock wave diffraction over a wedge and steady transonic flows over NACA 0012 and RAE 2822 airfoils are presented to test and compare the methods. Various aspects of the variant WENO methods including contact discontinuity sharpening and steady‐state convergence rate are examined. By using the WENO scheme with anti‐diffusive flux corrections, the present solutions indicate that good convergence rate can be achieved and high‐order accuracy is maintained and contact discontinuities are sharpened markedly as compared with the original WENO schemes on the same meshes. Copyright © 2008 John Wiley & Sons, Ltd.     

Energy concentration for the Landau–Lifshitz equation

For the Landau–Lifshitz equation on a domain with three space dimensions, we consider energy concentration phenomena arising in the context of weakly convergent sequences of solutions. The concentration measure can be interpreted as a family of generalized curves. We establish a connection to a geometric flow.     

Low-velocity pneumatic conveying in horizontal pipe for coarse particles and fine powders

First,the characteristics of low-velocity conveying of particles having different hardness are experimentally investigated in a horizontal pipeline in terms of flow pattern and pressure drop to show that the slug flow can be classified into two types depending on the settling of particles along the pipeline,and the period is small for slug flow without the settled layer,which is called solitary slug flow.The pressure drop for soft particles is shown to be larger than that for hard particles.Then,experimental results are presented on horizontal fluidized-bed conveying of fine powders to show that air release from the top surface of the conveying channel is an important factor for high mass flow rate of particles.     

Flow prolongation of some tangent valued forms

We study the prolongation of semibasic projectable tangent valued k-forms on fibered manifolds with respect to a bundle functor F on local isomorphisms that is based on the flow prolongation of vector fields and uses an auxiliary linear r-th order connection on the base manifold, where r is the base order of F. We find a general condition under which the Frölicher-Nijenhuis bracket is preserved. Special attention is paid to the curvature of connections. The first order jet functor and the tangent functor are discussed in detail. Next we clarify how this prolongation procedure can be extended to arbitrary projectable tangent valued k-forms in the case F is a fiber product preserving bundle functor on the category of fibered manifolds with m-dimensional bases and local diffeomorphisms as base maps.     

Influence of the capillarity on a creeping film flow down an inclined plane with an edge

Summary In creeping flows of thin films, the capillarity can play a dominant role. In this paper, the creeping film flow down an inclined plane with an edge is considered. The influence of the capillarity on the velocity and the film surface is studied analytically, numerically and experimentally. Received 12 April 1999; accepted for publication 9 May 1999     

On the plane problem of the flow around a submerged beam

We consider the problem of the steady flow of an ideal heavy fluid around a submerged beam. The problem is obtained from the free-boundary problem of the flow past a submerged obstacle in the limit of bodies of vanishing thickness. We introduce a special Sobolev space formulation of the problem in term of a perturbed stream function and prove its unique solvability for every value of the unperturbed flow velocity, with the possible exception of a discrete set depending on the geometry of the domain. The asymptotic properties of the solutions are discussed.     

Identification of ground water flow patterns using particle models

Particle models are often used to simulate transport processes in ground water. The ground water flow pattern is one of the driving parameters of the transport model. In this paper a parameter identification algorithm is developed for particle type models to identify the underlying flow pattern from concentration measurements. The estimation problem is solved with a gradient based algorithm. For each generated particle track, the adjoint track is determined to efficiently compute gradient of the criterion.     

A multigrid procedure for Cartesian ghost‐cell methods

This paper proposes a multigrid technique for Cartesian grid flow solvers. A recently developed ghost body‐cell method for inviscid flows is combined with a nested‐level local refinement procedure, which employs multigrid to accelerate convergence to steady state. Different from standard multigrid applications for body‐fitted grids, a fictitious residual needs to be defined in the ghost cells to perform a correct residual collection and thus to avoid possible stalling of the multigrid procedure. The efficiency of the proposed local refinement multigrid Cartesian method is demonstrated for the case of the inviscid subsonic flow past a circular body. Copyright © 2008 John Wiley & Sons, Ltd.     

Numerical analysis of turbulent flow separation in a rectangular duct with a sharp 180‐degree turn by algebraic Reynolds stress model

Turbulent flow in a rectangular duct with a sharp 180‐degree turn is difficult to predict numerically because the flow behavior is influenced by several types of forces, including centrifugal force, pressure‐driven force, and shear stress generated by anisotropic turbulence. In particular, this type of flow is characterized by a large‐scale separated flow, and it is difficult to predict the reattachment point of a separated flow. Numerical analysis has been performed for a turbulent flow in a rectangular duct with a sharp 180‐degree turn using the algebraic Reynolds stress model. A boundary‐fitted coordinate system is introduced as a method for coordinate transformation to set the boundary conditions next to complicated shapes. The calculated results are compared with the experimental data, as measured by a laser‐Doppler anemometer, in order to examine the validity of the proposed numerical method and turbulent model. In addition, the possibility of improving the wall function method in the separated flow region is examined by replacing the log‐law velocity profile for a smooth wall with that for a rough wall. The analysis results indicated that the proposed algebraic Reynolds stress model can be used to reasonably predict the turbulent flow in a rectangular duct with a sharp 180‐degree turn. In particular, the calculated reattachment point of a separated flow, which is difficult to predict in a turbulent flow, agrees well with the experimental results. In addition, the calculation results suggest that the wall function method using the log‐law velocity profile for a rough wall over a separated flow region has some potential for improving the prediction accuracy. Copyright © 2007 John Wiley & Sons, Ltd.