300MeV质子同步加速器概念设计优化（英文）

目前处于设计阶段的哈尔滨工业大学空间辐照效应装置,其核心部件是由1台10 MeV的注入器、1台300MeV的同步加速器以及输运线构成的加速器装置。同步加速器中引出的质子束流被用于辐照研究。基于装置的概念设计,优化了其同步加速器部分的设计。设计了新的磁聚焦结构,优化了基于新的磁聚焦结构的多圈注入系统的凸轨变化模式,提高了注入效率。为了更好地优化引出束流的时间结构,慢引出系统采用了RF knock-out的方法。为了满足精准辐照的要求,研究了RF Kicker的频率调制,发现RF Kicker的双频调制能使得引出束流更均匀。A research complex for aerospace radiation effects research is in the designing stage in Harbin Institute of Technology. Its core part is a proton accelerator complex, which consists of a 10 MeV injector, a 300 MeV synchrotron and beam transport lines. The proton beam extracted from the synchrotron is utilized for the radiation effects research. Based on the conceptual design, the design study for optimizing the synchrotron has been done. A new lattice design was worked out, and the decreasing pattern of the bump of the multi-turn injection system was optimized to increase the injection efficiency. In order to improve the time structure of the extracted beam, a RF knock-out method is employed in the slow extraction system. To meet the requirement of accurate control of dose, the frequency modulation of the RF kicker is well investigated, and the dual frequency modulation has been found to have a better performance for a uniform spill.     

斜圈弹簧力学性能的有限元分析

斜圈弹簧在医疗器械、高压开关、汽车工业等领域应用广泛. 但其结构特殊, 受力复杂, 目前尚无有效的理论计算方法得出其载荷位移曲线, 只能通过数值仿真的方法研究其力学性能. 利用有限元软件ANSYS参数化建立环形斜圈弹簧有限元模型, 通过对模型的分析求解, 得出了其主要参数线径、节距、倾斜角与斜圈弹簧力学性能之间的关系. 研究了斜圈弹簧工作状态下的受力变形情况, 计算分析结果为斜圈弹簧的优化设计和合理应用提供了理论依据.     

Application of the SCC method to the multi-O(4) model: The collective Hamiltonian

The collective Hamiltonian up to the fourth order for a multi-O(4) model is derived for the first time based on the self-consistent collective-coordinate(SCC) method,which is formulated in the framework of the time-dependent Hartree-Bogoliubov(TDHB) theory.This collective Hamiltonian is valid for the spherical case where the HB equilibrium point of the multi-O(4) model is spherical as well as for the deformed case where the HB equilibrium points are deformed.Its validity is tested numerically in both the sp...     

引入电流负反馈后电路输出阻抗变化的测试难点及解决方案

引入电流负反馈会使放大电路的输出电阻变大,这种变化在实验测量时几乎没有出现。我们在分析原因后,提出了一种简单、易行的解决方案,并且对电路参数进行了合理化设计,使实验效果非常理想。     

一个新的离散的演化方程族及其Hamilton结构

A new discrete isospectral problem is introduced, from which a hierarchy of Laxintegrable lattice equation is deduced. By using the trace identity, the correspondingHamiltonian structure is given and its Liouville integrability is proved.     

二分图中关于Enomoto问题的结果

设k,n1和n2是3个正整数,G=（V1,V2;E）是一个二分图,使得｜V1｜=n1,｜V2｜=n2,其中n1≥2k＋1,n2≥2k＋1并且n1-n2≤1．如果对任意不相邻的x∈V1和y∈V2,都有d（x）＋d（y）≥2k＋2,则G包含k个相互独立的圈．以上结果部分地回答了Enomoto提出的关于二分图有独立圈的问题．     

BOTDA光纤传感技术在光纤环圈质量评估中的应用

在分析光纤环对陀螺整体性能影响的基础上,提出将BOTDA光纤传感技术用于光纤环质量检测。通过对光纤环的在线检测、热应力检测和骨架性能影响测试,能及时发现并消除光纤绕制中的应力尖峰及换层现象,消除由骨架、热应力引起的光纤应力曲线反转现象。     

Evaporation-induced Morphology Pattern of Triblock Copolymer A5B10C5 in Thin Film： a Multibody DPD Simulation Study

We used multibody dissipative particle dynamics method,by which the attractive and repulsive interactions can be effectively considered,to investigate the evaporation-induced morphology patterns of triblock copolymer A5B10C5 in thin film.With changing attractive interactions between solvent vapor and triblock copolymer that represent various selective solvents,lamellar morphology,sandwich lamellar morphology,spherical morphology and disorder morphology patterns of the thin films were obtained for both coil-coil-coil and rod-coil-coil chain architectures,respectively.The order parameter and the film thickness were calculated during the process for characterizing the film properties,and it was found that the rigid A-block of the triblock copolymer hinders the formation of an ordered structure.     

Electronic band structure of a type-II ’W’ quantum well calculated by an eight-band k·p model

In this paper, we present an investigation of type-II 'W' quantum wells for the InAs/Ga_1-xIn_xSb/AlSb family, where 'W' denotes the conduction profile of the material. We focus our attention on using the eight-band k?p model to calculate the band structures within the framework of finite element method. For the sake of clarity, the simulation in this paper is simplified and based on only one period---AlSb/InAs/Ga_1-xIn_xSb/InAs/AlSb. The obtained numerical results include the energy levels and wavefunctions of carriers. We discuss the variations of the electronic properties by changing several important parameters, such as the thickness of either InAs or Ga_1-xIn_xSb layer and the alloy composition in Ga_1-xIn_xSb separately. In the last part, in order to compare the eight-band k?p model, we recalculate the conduction bands of the 'W' structure using the one-band k?p model and then discuss the difference between the two results, showing that conduction bands are strongly coupled with valence bands in the narrow band gap structure. The in-plane energy dispersions, which illustrate the suppression of the Auger recombination process, are also obtained.     

Fractional charges and fractional spins for composite fermions in quantum electrodynamics

By using the Faddeev-Senjanovic path integral quantization method, we quantize the composite fermions in quantum electrodynamics (QED). In the sense of Dirac’s conjecture, we deduce all the constraints and give Dirac’s gauge transformations (DGT). According to that the effective action is invariant under the DGT, we obtain the Noether theorem at the quantum level, which shows the fractional charges for the composite fermions in QED. This result is better than the one deduced from the equations of motion for the statistical potentials, because this result contains both odd and even fractional numbers. Furthermore, we deduce the Noether theorem from the invariance of the effective action under the rotational transformations in 2-dimensional (x, y) plane. The result shows that the composite fermions have fractional spins and fractional statistics. These anomalous properties are given by the constraints for the statistical gauge potential.