Heinz Gerrens Revisited: A New Look at the Impact of Reactor Type on Polymer Chain Morphology

The equations for predicting molecular weight distribution, copolymer composition distribution, and copolymer sequence distribution for three polymerization mechanisms (monomer linkage with termination, monomer linkage without termination, and polymer linkage), and three reactor types (batch/plug flow, homogenous continuous stirred tank, and segregated continuous stirred tank) are assembled from various sources and compared and contrasted.     

NA序列部分和的矩完全收敛性

讨论了NA序列部分和的矩完全收敛性,在一定条件下获得了NA序列矩完全收敛的充要条件,显示了矩完全收敛和矩条件之间的关系,将独立同分布随机变量序列矩完全收敛的结果推广到NA序列,得到了与独立随机变量序列情形类似的结果.     

Acoustoelastic effect simulation by time–space finite element formulation based on quadratic interpolation of the acceleration

Acoustoelastic effect describes the change of ultrasound velocity due to the initial stress. Its simulation involves a numerical analysis of nonlinear elastodynamics and requires high accuracy in the time domain. A time–space finite element formulation, derived from the quadratic interpolation of the acceleration within a time segment, is proposed for an accurate simulation of the acoustoelastic effect in the present study. Ten different integration schemes are generated based on this formulation and nine of them are found to be conditionally stable. Among the nine stable schemes, one is found to obtain a spectral radius of one when the normalized step ratio is less than 5.477, indicating no numerical dissipation or numerical divergence. Compared with integration schemes from previous studies, this integration scheme demonstrates better performance in calculation accuracy and energy conservation. A two-stage approach, namely the static stage and the dynamic stage, has been employed in the simulation of the acoustoelastic effect. The former stage is adopted to obtain the initial stress and the latter stage, where the proposed integration scheme is implemented, is adopted to simulate the ultrasound propagation in an initial stress state. The simulation results of the dynamic stage show that the ultrasound velocity increases in a compression stress state and decreases in a tension stress state for aluminum alloy, which is in good agreement with previous experimental studies. Together with the simulation result of the static stage, it is conjectured that the acoustoelastic effect results from the stress-dependent elastic modulus.     

Palindromic Vectors,Symmetropy and Symmentropy as Symmetry Descriptors of Binary Data

Today, the palindromic analysis of biological sequences, based exclusively on the study of “mirror” symmetry properties, is almost unavoidable. However, other types of symmetry, such as those present in friezes, could allow us to analyze binary sequences from another point of view. New tools, such as symmetropy and symmentropy, based on new types of palindromes allow us to discriminate binarized 1/f noise sequences better than Lempel–Ziv complexity. These new palindromes with new types of symmetry also allow for better discrimination of binarized DNA sequences. A relative error of 6% of symmetropy is obtained from the HUMHBB and YEAST1 DNA sequences. A factor of 4 between the slopes obtained from the linear fits of the local symmentropies for the two DNA sequences shows the discriminative capacity of the local symmentropy. Moreover, it is highlighted that a certain number of these new palindromes of sizes greater than 30 bits are more discriminating than those of smaller sizes assimilated to those from an independent and identically distributed random variable.     

Electrochemical DNA Biosensor Based on Partially Reduced Graphene Oxide Modified Carbon Ionic Liquid Electrode for the Detection of Transgenic Soybean A2704‐12 Gene Sequence

In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH₂ modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 2.9×10^?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.     

一种刺松藻来源的硫酸阿拉伯聚糖的制备及特征结构表征

刺松藻(Codium fragile)经水提-醇沉获得粗多糖, 进一步将刺松藻粗多糖(CFP) 通过Q-Sepharose Fast Flow(QFF) 阴离子交换柱纯化得到6个多糖组分CFP1CFP6, 其中, 在CFP6中发现纯度较高的阿拉伯聚糖. 采用高效凝胶渗透色谱与十八角激光散射仪联用法和1-苯基-3-甲基-5-吡唑啉酮(PMP)柱前衍生高效液相色谱法对CFP6的分子量及单糖组成进行了分析. 结果表明, CFP6是一种分子量为79290的多糖, 由阿拉伯糖(Ara)和半乳糖(Gal)组成, 二者摩尔比为14.8:1.0. 通过多维核磁共振波谱、 液相色谱-质谱联用及二级质谱等方法对CFP6的糖苷键连接方式及其寡糖序列结构进行表征, 进一步阐明了该复杂多糖的特征结构. 经判断, CFP6主链由Ara组成, 通过 β-(1→3)糖苷键连接, 在Ara的C2位存在分支结构, 硫酸基位于Ara的C4或C2位.     

三维有序金掺杂纳米TiO_2修饰电极用于抗肿瘤药物与DNA相互作用的研究

利用模板法在氧化铟锡(ITO)电极表面制备了三维有序多孔结构的金掺杂纳米Ti O2薄膜修饰电极(3DOM GTD/ITO),并在此修饰电极上成功固定小牛胸腺DNA(ct DNA),从而构建了一种新型的DNA生物传感器(DNA/3DOM GTD/ITO),并通过透射电镜(TEM)、扫描电镜(SEM)对修饰电极的表面形貌进行表征。采用电化学交流阻抗(EIS)法研究了ct DNA在3DOM GTD/ITO修饰电极表面的固定情况,结果表明,ct DNA已被成功地固定在3DOM GTD/ITO修饰电极表面。采用循环伏安法、微分脉冲伏安法等电化学方法研究了抗肿瘤药物槲皮素(Qu)在3DOM GTD/ITO修饰电极表面的电化学性质及与ct DNA的相互作用。结果表明,Qu在3DOM GTD/ITO修饰电极表面有1对准可逆的氧化还原峰,其氧化还原反应为2电子和2质子的转移过程。Qu可与固定在修饰电极上的ct DNA发生较强的结合作用,其结合常数(K)为3.61×106L/mol。循环伏安实验、紫外-可见吸收光谱、分子荧光光谱、圆二色性光谱均表明Qu与ct DNA之间的相互作用模式为嵌插作用。Qu与ct DNA的碱基结合具有序列选择性,对Qu与聚(d G-d C)及聚(d A-d T)的结合常数进行计算,得到结合常数比K(d G-d C)/K(d A-d T)=3.5,表明Qu与ct DNA发生嵌插作用时更倾向于结合在GC富集区域。     

考虑剪切效应层合板的Hamilton体系及辛几何方法

基于ＹＮＳ层合板理论,通过对混合能变分原理的修正,建立了层合板问题的Ｈａｍｉｌｔｏｎ正则方程。在辛几何数学框架下,采用共轭辛正交归一关系给出精确解。并与经典层板理论进行了比较。     

新型Poisson括号意义下的无穷维Lie代数

本文首先针对ＫｄＶ方程的Ｈａｍｉｌｔｏｎ形式，建立一种比较容易验证的新型Ｐｏｉｓｓｏｎ括号和无穷维Ｌｉｅ代数．其次，研究ＫｄＶ方程的Ｈａｍｉｌｔｏｎ形式的第一积分与新型Ｐｏｉｓｏｎ括号的关系，得到判定第一积分的充分必要条件．最后，构造ＫｄＶ方程的第一积分．