New classes of self-complementary codes and quasi-symmetric designs

We present a new technique for constructing binary error correcting codes and give some examples of codes that can be constructed via this method. Among the examples is an infinite family of self-complementary codes with parameters (2u ²−u, 8u ², u ²−u) that can be constructed whenever there exists a u × u Hadamard Matrix. These codes meet the Grey–Rankin bound and imply the existence of quasi-symmetric designs on 2u ²−u points.     

应用灰色系统模型提高仪器精度

文中介绍了灰色系统的原理及建模方法 ,并把它与测量仪器的使用结合起来 ,提出一种提高测量精度的新方法。实验结果证明了此方法的经济性和有效性。     

基于核和灰度的灰色网络计划技术

针对工程项目工作持续时间具有灰色不确定性特征的实际问题,结合灰色系统理论,提出了基于核和灰度的灰色网络计划技术.考虑业主方进度偏好,构造灰工作三角形白化权函数,然后以三角形重心横坐标为灰工作的核,以要求工期为论域计算灰工作的灰度,并以核和灰度表示的简化形式构建了灰工作网络计划.给出了灰工作网络计划时间参数计算方法,并探讨了灰关键路径的判定方法.案例分析验证了方法的科学性和有效性.     

基于双光子光折变效应的非相干耦合灰光伏孤子族

为了研究开路条件下双光子光伏光折变材料中的灰光伏孤子族,建立了光伏孤子族的动态演化方程,给出了非相干耦合灰光伏孤子族的数值解.采用数值模拟的方法,求解孤子族的数值表达式.结果表明:这种孤子族是由多束偏振方向和波长都相同的互不相干光束耦合形成的.当孤子族只有两个分量时,灰光伏孤子族可以退化成灰-灰光伏孤子对;当孤子的灰度...     

Grey enterprise input-output analysis

A system whose information is partially known and partially unknown to the investigator is named a grey system. Due to various inevitable noises contained in the process of data collection, managers of enterprise usually have to deal with poor information and make decisions under the influence of uncertainty. In this article, we propose grey enterprise input-output analysis. The value and the physical types of grey models are established. In particular, we present a detailed way of calculating the matrix-covered set of the inverse of grey triangular matrix. The proposed method makes the management of enterprises more practically possible when the available data contains uncertainty. At the end, we look at a case study to show the practical feasibility of our work.     

The use of grey relational analysis to determine laser cutting parameters for QFN packages with multiple performance characteristics

This paper reports an application of the grey relational analysis (GRA) to directly optimize laser cutting of a quad flat non-lead (QFN) strip using six performance characteristics. The most important performance characteristics include the cutting depth, the width of heat affected zone (HAZ), and the width of cutting line for both epoxy and Cu+epoxy materials along the cutting path. During the GRA, higher grades are obtained from any of the deeper (more complete) cutting depth, reduced widths of the HAZ and reduced widths of the cutting line. From nine experiments based on the orthogonal array of L9(3⁴), a current of 29 A, a frequency of 2 kHz, and a cutting speed of 2 mm/s were found to be the best parameters for laser cutting of a QFN strip with a thickness of 0.9 mm. Moreover, the analysis of variance (ANOVA) is also employed to determine the contribution of each control parameter on the cutting quality characteristics. The three largest measured contributions on the cutting quality in decreasing order are the frequency, the current, and the cutting speed. Compared with the Taguchi optimization method, the GRA approach is significantly simpler because it directly assigns appropriate weighting factors to the required qualities. Finally, confirmation experiments are performed to ensure the robustness of the GRA predicted optimal configuration for laser cutting a QFN strip.     

灰色预测在农林牧渔业发展中的应用

运用GM(1,1)模型对我国农林牧渔业总产值进行预测,首先对数据进行预处理,使其满足灰色预测模型的条件,运用M ATLAB软件编程求解.通过做残差检验和滚动检验,发现误差均小于10%,最后进行了关联度分析.得出结论:对农林牧渔业总产值影响最大的为渔业,其次为牧业,林业和农业.     

含分压电阻的光折变屏蔽光伏空间灰孤子(英文)

为了研究外加偏压光伏光折变晶体中的空间灰孤子,建立了含分压电阻的光折变屏蔽光伏空间灰孤子的演化方程,给出了灰孤子解.采用数值模拟的方法,求解灰孤子的数值表达式,得到了不同参量取值下的灰孤子包络.数值结果表明:当分压电阻、晶体的外加电场和光伏场取不同值时,可以分别得到有无分压电阻的屏蔽灰孤子;开路的光伏灰孤子,有、无分压电阻的闭路光伏灰孤子;有、无分压电阻的屏蔽光伏灰孤子.     

Growth of Ga-doped ZnO films with ZnO buffer layer by sputtering at room temperature

Gallium-doped zinc oxide films have been grown on glass substrates with and without ZnO buffer layers by r.f. magnetron sputtering at room temperature. In this approach, the grey relational Taguchi method analysis is adopted to solve the coating process with multiple deposition qualities. Optimal coating parameters can then be determined by using the gray relational grade as a performance index. The GZO coating parameters (r.f. power, sputtering pressure, O₂/(Ar+O₂) flow-rate ratios, and deposition time) are optimized, by taking into account the multiple performance characteristics (structural, morphological, deposition rate, electrical resistivity, and optical transmittance). The results indicate that with the grey relational Taguchi method, the electrical resistivity of GZO films is reduced from 9.23×10⁻³ to 5.77×10⁻³ Ω cm and optical transmittance increases from 79.42% to 82.95%, respectively. The ZnO buffer layer can reduce the electrical resistivity of GZO films from 5.77×10⁻³ to 2.38×10⁻³ Ω cm. It can be anticipated that room temperature deposition enables film deposition onto polymeric substrates for flexible optoelectronic devices.     

关于粗糙集和灰色系统之间某些关系的探讨

首先介绍粗糙集与灰色系统两种理论,并对二者进行比较。接着介绍普通粗糙集、P-粗糙集以及灰色集的定义,并就灰色集、模糊集和经典集合三者进行对比分析。我们提出了点灰度和集灰度两种灰度概念用于描述灰色系统的信息不确定性。通过P粗糙集导出相应的灰色集,并研究相关的灰度、粗糙度与边界域的性质和关系。分析表明使用导出的灰色集对系统的信息不确定性的估计与相应的粗糙集是一致的,因此两种理论在描述和处理不确定性信息系统方面的一定的相关性,将两种理论相结合来处理某些不确定性信息系统可能更为有效。