带时间窗的三维装载物流配送优化方法研究

针对城市物流配送优化研究在客户服务时间窗和货物装载方式合理结合方面存在的不足,考虑物流配送车厢货物装载方式与客户访问序列相关的特征对车厢空间进行合理的区域划分。首先,构建了包含配送中心的固定成本、配送车辆的运输成本、维修成本、租赁成本和违反时间窗惩罚成本的物流运营成本最小化和配送车辆空间利用率最大化的双目标优化模型;然后,提出一种结合遗传算法(GA)全局搜索能力和禁忌搜索算法(TS)局部搜索能力的GA-TS混合算法求解模型;最后,结合重庆市某配送中心的三维装载物流配送实例数据进行了优化计算,实验结果给出了带时间窗的三维装载物流配送路径优化方案,并进行了不同车厢空间分区模式下平均装载率、物流运营成本和车辆使用数的比较分析。研究表明,当客户需求货物种类数与车辆的空间区域划分数相等且按货物类型进行区域划分时,物流运营成本最小,配送车辆使用数最少和车辆平均装载率最高。     

典型荷载条件下淤泥孔径分布特征核磁共振试验研究

模拟了淤泥地基加固工况对应的几种典型荷载效应,并利用核磁共振测试寻求典型荷载水平和速率下,淤泥孔隙及其孔径分布的变化规律,以探讨淤泥地基典型加固条件下微细观结构的三维响应.结果表明:在一定压力作用下,淤泥中最大孔隙数将会减少,应力水平越高,减少量越大,而当冲击荷载达到更高的某一水平时,淤泥中最大孔隙和最小孔隙所占比例均会减小,孔隙更趋于均匀;约束样品的侧限刚度将会增加淤泥土的总受力水平,进而更易减小大孔隙所占比例;当荷载水平680 kPa时,加载速率是决定相对最大孔隙占总孔隙数比例的关键因素,速率较小会使得该比例增大,速率较大则使得该比例减小,其界限值在0.8 MPa/s与1.6 MPa/s之间;一定的冲击荷载和速率水平下,随着作用次数即总能量的提高,淤泥中的相对大孔隙和最大孔隙部分会明显减少,而当间隔时间较短的作用次数再提高时,上述效应会降低;对于有效减少较大孔隙而言,淤泥受冲击的次数存在某个合适的量值.上述规律有助于从内部本质上寻求和掌握各种静动力排水固结法处理淤泥类软基的微观机理,为其科学设计及施工优化提供了进一步的依据.     

Thomson scattering induced by gravitational waves

We investigate the effects of a weak gravitational wave, modelled as a gaussian wavepacket, on the polarization state of an electromagnetic field enclosed in a cavity. Our approach is semiclassical, in that the electromagnetic field is described as a quantum field, while the gravitational perturbation is treated classically, as a slightly curved background spacetime. Assuming that before the interaction the electromagnetic field has been prepared in a given polarization state, we show that – due to the gravitational scattering with the wave – some photons having different polarization states are found in the cavity at late times. Such polarization scattering has some resemblance with Thomson scattering, well-known in Quantum Electrodynamics: hence the motivation for the title. We give a numerical estimate of the resulting photon polarization spreading in the case of a typical gravitational burst from a final supernova rebound. We also briefly comment about the possible influence of such gravitational scattering on the Cosmic Microwave Background (CMB) polarization.     

Post buckling response of functionally graded materials plate subjected to mechanical and thermal loadings with random material properties

In this paper, the second order statistics of post buckling response of functionally graded materials plate (FGM) subjected to mechanical and thermal loading with nonuniform temperature changes subjected to temperature independent (TID) and dependent (TD) material properties is examined. Material properties such as material properties of each constituent’s materials, volume fraction index are taken as independent random input variables. The basic formulation is based on higher order shear deformation theory (HSDT) with von-Karman nonlinear kinematic using modified C⁰ continuity. A direct iterative based C⁰ nonlinear finite element method (FEM) combined with mean centered first order perturbation technique (FOPT) proposed by last two authors for the composite plate is extended for Functionally Graded Materials (FGMs) plate with reasonable accuracy to compute the second order statistics (mean and coefficient of variation) of the post buckling load response of the FGM plates. The effect of random material properties with amplitude ratios, volume fraction index, plate thickness ratios, aspect ratios, boundary conditions and types of loadings subjected to TID and TD material properties are presented through numerical examples. The performance of outlined present approach is validated with the results available in literatures and independent Monte Carlo simulation (MCS).     

冲击加载下Zr51Ti5Ni10Cu25Al9金属玻璃的塑性行为

进行了10—27 GPa应力范围内Zr₅₁Ti₅Ni₁₀Cu₂₅Al₉金属玻璃的平面冲击实验以研究其高压-高应变率加载下的塑性行为.由样品自由面粒子速度剖面的分析获得了冲击加载过程的轴向应力,并通过轴向应力与静水压线的比较获得剪应力.实验结果表明,尽管存在明显的松弛效应,但Zr基金属玻璃的Hugoniot弹性极限随着冲击应力的增加而增加.然而,塑性波阵面上的剪应力则显示先硬化而后软化现象,而且软化的幅度随冲击应力的增加而增加.冲击加载下Zr基金属玻璃的上述剪应力变化特征与分子动力学模拟结果比较一致,但与压剪实验结果和一维应力冲击实验结果明显不同.     

Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.     

金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

Underpotential Deposition Preparation of Pt‐loading AuNPs/Reduced Graphene Oxide and Its Catalytic Detection of Catechol

Ultralow Pt‐loading Au nanoparticles have been fabricated on the surface of reduced graphene oxide (RGO) by using underpotential deposition (UPD) monolayer redox replacement process. The Pt/Au/RGO modified electrode exhibits an excellent electrocatalytic activity toward catechol and hydroquinone. Under the optimized condition, the separation of peak‐to‐peak between hydroquinone and catechol is 197 mV, which is wide enough to distinguish the isomers of benzenediol. Catechol is detected by the Pt/Au/RGO/GCE with a low detection limit in the presence of hydroquinone.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.