Bone-ablation mechanism using CO2 lasers of different pulse duration and wavelength

Bone ablation using different pulse parameters and four emission lines of 9.3, 9.6, 10.3, and 10.6 m of the CO₂ laser exhibits effects which are caused by the thermal properties and the absorption spectrum of bone material. The ablation mechanism was investigated with light- and electron-microscopy at short laser-pulse durations of 0.9 and 1.8 s and a long pulse of 250 s. It is shown that different processes are responsible for the ablation mechanism either using the short or the long pulse durations. In the case of short pulse durations it is shown that, although the mineral components are the main absorber for CO₂ radiation, water is the driving force for the ablation process. The destruction of material is based on explosive evaporation of water with an ablation energy of 1.3 kJ/cm³. Histological examination revealed a minimal zone of 10–15 m of thermally altered material at the bottom of the laser drilled hole. Within the investigated spectral range we found that the ablation threshold at 9.3 and 9.6 m is lower than at 10.3 and 10.6 m. In comparison the ablation with a long pulse duration is determined by two processes. On the one side, the heat lost by heat conduction leads to carbonization of a surface layer, and the absorption of the CO₂ radiation in this carbonized layer is the driving force of the ablation process. On the other side, it is shown that up to 60% of the pulse energy is absorbed in the ablation plume. Therefore, a long pulse duration results in an eight-times higher specific ablation energy of 10 kJ/cm³.     

Spinor Green’s functions via spherical means on products of space forms

We explicitly compute the Green’s function of the spinor Klein–Gordon equation on the Riemannian and Lorentzian manifolds of the form _M0×?×_MN$M_0\times ?\times M_N$, with each factor being a space of constant sectional curvature. Our approach is based on an extension of the method of spherical means to the case of spinor fields and on the use of Riesz distributions.     

Study of the sintering behaviour of MgB2 superconductor during hot-pressing

The densification behaviour of MgB₂ was studied when commercial powder was hot-pressed in the temperature range 1070–1190 °C. The mechanisms active during sintering were investigated by continuously recording the shrinkage vs. time and elaborating the data on the basis of Kingery’s model for liquid phase sintering. XRD and SEM analysis on final dense bodies were used to evaluate secondary phases formation during sintering and the effect of magnesium sublimation. AC magnetic susceptibility measurements were also performed to correlate the microstructural and morphological modifications induced by hot-pressing and the superconducting properties.     

The effect of local electronic interaction on the optical properties of boron–nitride nanotubes

We investigate the behavior of optical absorption of boron–nitride nanotubes (6,0) in the context of Hubbard model at the paramagnetic sector. GW approximation has been implemented in order to make self-energy matrix of electronic system. Afterwards, the real and imaginary parts of transverse dielectric functions have been obtained using linear response theory. The results show that the frequency gap in the optical absorption decreases with Coulomb repulsion strength. Moreover the results show that the local Coulomb interaction leads to the appearance of the excitonic effects in the optical spectrum. Finally the effects of electronic concentration on the frequency behavior of imaginary part of dielectric function have been investigated.     

Planar imaging of a laboratory flame and of internal combustion in an automobile engine using UV rayleigh and fluorescence light

Rayleigh scattering of tunable excimer laser light (193 nm and 248 nm) is used to obtain 2-D images of the distribution of total densities in a laboratory flame and in a cylinder of an automobile engine. Because the UV light is very strongly scattered, there is ample signal and there is excellent contrast of Rayleigh light against surface scattered light, even in the small volume of the engine cylinder. The laboratory flame data are converted to an image of the temperature field. The Rayleigh images are compared with those from planar laser induced predissociative fluorescence, which yield state-specific densities of selected molecules. The experimental arrangement is the same except for the selection of laser wavelength and the filtering of the radiated light.     

Design Consideration for a Two-Distributed-Junction Tuning Circuit

We describe a novel method of designing a tuning circuit with two half-wave distributed junctions separated by a half-wavelength microstripline, which analytically determines the circuit parameters such as the minimum current density of the junctions and the characteristic impedances of the distributed junctions and the microstripline. The tuning circuit was approximated by simple transmission theory and then simplified with ideal circuit components for analysis. We applied Chebyshevs band-pass filter theory, in part, to optimize the circuit design. The analytical results revealed that a high characteristic-impedance ratio between the distributed junctions and the microstripline is necessary to obtain broadband matching using low-current-density junctions. The experimental results for all-NbN SIS mixers we designed with this method demonstrated double-sideband (DSB) receiver-noise temperatures of 6–10 quanta from 710 to 810 GHz for a mixer with a current density of only 4 kA/cm² (estimated C_JR_N product of 37 at 750 GHz). The RF bandwidth was broader than that of a conventional full-wave distributed SIS mixer with the same current density.     

The incompatibility between local hidden variable theories and the fundamental conservation laws

I discuss in detail the result that the Bell’s inequalities derived in the context of local hidden variable theories for discrete quantized observables can be satisfied only if a fundamental conservation law is violated on the average. This result shows that such theories are physically nonviable, and makes the demarcating criteria of the Bell’s inequalities redundant. I show that a unique correlation function can be derived from the validity of the conservation law alone and this coincides with the quantum mechanical correlation function. Thus, any theory with a different correlation function, like any local hidden variable theory, is incompatible with the fundamental conservation laws and space-time symmetries. The results are discussed in the context of two-particle singlet and triplet states, GHZ states, and two-particle double slit interferometry. Some observations on quantum entropy, entanglement, and nonlocality are also discussed.     

On the Positivity of the Coefficients of a Certain Polynomial Defined by Two Positive Definite Matrices

It is shown that the polynomialp(t) = Tr[(A+tB)^m]has positive coefficients when m = 6 and A and B are any two 3-by-3 complex Hermitian positive definite matrices. This case is the first that is not covered by prior, general results. This problem arises from a conjecture raised by Bessis, Moussa, and Villani in connection with a long-standing problem in theoretical physics. The full conjecture, as shown recently by Lieb and Seiringer, is equivalent to p(t) having positive coefficients for any m and any two n-by-n positive definite matrices. We show that, generally, the question in the real case reduces to that of singular A and B, and this is a key part of our proof.     

Proton induced thermal stress-wave measurements using a Laser Doppler Vibrometer

Thermal stress-waves are generated in the solid target material when the proton beam interacts. These stress waves excite natural oscillations of the target or cause plastic deformations. Hence, an experimental setup with a laser Doppler vibrometer [CITE] was developed to investigate free surface vibrations of cylindrical targets. The target configurations for RIB and conventional neutrino beams (CNGS project) were investigated to analyze proton induced thermal stress-wave generation and propagation.     

Reaction between alkyl isocyanides and isopropylidene Meldrum’s acid in the presence of bidentate nucleophiles

Summary The reaction between alkyl isocyanides and isopropylidene Meldrum’s acid in the presence of 1,2-ethanediol leads to N ¹-(alkyl)-2-(5,7-dioxo-1,4-dioxepane-6-yl)-2-methylpropanamides. 1,3-Propanediol or 1,4-butanediol produce hydroxyalkyl 1-(tert-butyl)-4,4-dimethyl-2,5-dioxo-3-pyrrolidinecarboxylates. When the reaction was performed in the presence of catechol, bis(2-hydroxyphenyl) 2-[2-(tert-butylamino)-1,1-dimethyl-2-oxoethyl]malonate was obtained. 2-Aminophenols react with alkyl isocyanides in the presence of isopropylidene Meldrum’s acid to produce 1-alkyl-N ³-(2-hydroxyaryl)-4,4-dimethyl-2,5-dioxo-3-pyrrolidinecarboxamides in good yields.