Low temperature high-pressure crystallization and fluid phase equilibria in the systems Ar + CHF3 and N2 + CHF3

Abstract

An optical autoclave for phase studies on mixtures in the temperature range from 80 to 373 K and for pressures up to 200 MPa is described. The cell is fitted with sapphire windows and employs magnetic stirring. Measurements are performed according to the synthetical (e.g. by visual observation) or analytical method (e.g. by sampling and online gaschromatography). Results for the crystallization and fluid phase equilibria of the binary systems nitrogen + trifluoromethane and argon + trifluoromethane from 110 K to 230 K and up to 200 MPa are presented and discussed in comparison with other N₂- and CHF₃-systems.     

Structure factor of a hard-core fluid with short-range Yukawa attraction: analytical FMSA theory against Monte Carlo simulations

ABSTRACT

Analytical solution of the first-order Ornstein–Zernike equation known as the first-order mean spherical approximation (FMSA) theory due to Tang and Lu [J. Chem. Phys. 99, 9828 (1993)] is used to write down a closed equation for the static structure factor of the hard-sphere fluid with a short-range Yukawa attraction. Calculations are performed for a Yukawa decay exponent that corresponds to a range of attraction that does not exceed the first coordination shell of Lennard-Jones-like simple fluids. By comparison with Monte Carlo simulation data it is shown that the analytical FMSA equation for the static structure factor is of the same or even of superior accuracy as that within the seminumerical mean spherical approximation theory.     

Fluid Simulation of a Cusped Field Thruster

The cusped field thruster is a kind of newly developed electric propulsion device. The electric field at the channel exit and the low frequency oscillation were measured by former experiments. While the formation mechanism of them have not been fully interpreted yet. Through studying two distinguishing typical electron paths in the thrusters, a fluid model is built up along two electron paths, and then the model is completed by synthetically analyzing the effect of two electron paths. Time‐averaged electric potential distribution, anode current oscillation curve and time‐synchronized atom density and ion density distribution are obtained by simulation. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Direct numerical simulation of elastic turbulence and its mixing-enhancement effect in a straight channel flow

In this paper,we present a direct numerical simulation(DNS) of elastic turbulence of viscoelastic fluid at vanishingly low Reynolds number(Re = 1) in a three-dimensional straight channel flow for the first time,using the Giesekus constitutive model for the fluid.In order to generate and maintain the turbulent fluid motion in the straight channel,a sinusoidal force term is added to the momentum equation,and then the elastic turbulence is numerically realized with an initialized chaotic velocity field and a stretched conformation field.Statistical and structural characteristics of the elastic turbulence therein are analyzed based on the detailed information obtained from the DNS.The fluid mixing enhancement effect of elastic turbulence is also demonstrated for the potential applications of this phenomenon.     

弹性板水下爆炸冲击载荷的修正虚拟流体方法分析

研究非接触水下爆炸中板结构厚度和密度对冲击载荷和空化演变的影响.将近期发展的修正的虚拟流体方法推广应用于处理可压缩流体与弹性板结构的非线性相互作用.研究发现,假设结构不发生断裂破坏,较小的板厚度或密度可以减弱爆炸波对结构的冲击,冲击载荷随着厚度或密度的增大非线性地趋向于固壁边界下的结果.而且较小的板厚度或密度可以促使空化较早形成,产生较大的空化区,并推迟和减弱空化破裂对结构的二次冲击.     

电磁力及其对MIG焊接熔池流场的影响

MIG焊接熔池具有不规则的表面边界,温度较高且分布极不均匀,在电磁力、浮力、表面张力等的作用下发生剧烈运动.基于熔池表面变形较大时电弧电流密度的双峰分布模型,建立了电磁力的计算模型.采用数值模拟技术研究了熔池中的流体力学行为,揭示了焊接工艺参数对熔池流场的影响规律.实验表明,计算与实测结果符合良好.     

计算波状表面半透明流体层光谱反射特性的光线分裂跟踪法

提出一种计算具有波状表面的半透明流体层光谱反射特性的光线分裂跟踪法.对平行入射和漫入射光谱分别采用正向和反向跟踪计算,实现了对光线的分裂跟踪.该方法计算思路简捷、速度快、需用内存小,对此类问题的求解有良好的适应性.算例结果表明,表面的波状弯曲降低了流体层对漫入射光谱的反射能力;但对平行入射光谱,呈现出两种相反的影响.     

涡流数值模拟中的计算格式粘性分辨率探讨

采用理论分析和三角翼数值模拟实验相结合的方法,研究了目前常用的CFD计算格式——Jameson中心格式、RoeFDS格式、VanLeerFVS格式、迎风TVD格式等的粘性分辨率,论述了Jameson中心格式和RoeFDS格式在粘性分辨率上具有的优势,以及VanLeerFVS格式和迎风TVD格式在此方面的不足     

半球蓝宝石整流罩制造技术研究

整流罩在高速飞行中既要对空气进行整流,同时又起光学窗口的作用。蓝宝石材料硬度高,加工非常困难。分别从精磨模、精磨磨料、抛光膜层、抛光辅料、机床速度和压力等方面介绍了一种加工蓝宝石整流罩的工艺方法。     

Second-order random wave solutions for interfacial internal waves in N-layer density-stratified fluid

This paper studies the random internal wave equations describing the density interface displacements and the velocity potentials of N-layer stratified fluid contained between two rigid walls at the top and bottom. The density interface displacements and the velocity potentials were solved to the second-order by an expansion approach used by Longuet-Higgins （1963） and Dean （1979） in the study of random surface waves and by Song （2004） in the study of second- order random wave solutions for internal waves in a two-layer fluid. The obtained results indicate that the first-order solutions are a linear superposition of many wave components with different amplitudes, wave numbers and frequencies, and that the amplitudes of first-order wave components with the same wave numbers and frequencies between the adjacent density interfaces are modulated by each other. They also show that the second-order solutions consist of two parts： the first one is the first-order solutions, and the second one is the solutions of the second-order asymptotic equations, which describe the second-order nonlinear modification and the second-order wave-wave interactions not only among the wave components on same density interfaces but also among the wave components between the adjacent density interfaces. Both the first-order and second-order solutions depend on the density and depth of each layer. It is also deduced that the results of the present work include those derived by Song （2004） for second-order random wave solutions for internal waves in a two-layer fluid as a particular case.