In Silico Drug Repurposing of FDA-Approved Drugs Highlighting Promacta as a Potential Inhibitor of H7N9 Influenza Virus

Influenza virus infections continue to be a significant and recurrent public health problem. Although vaccine efficacy varies, regular immunisation is the most effective method for suppressing the influenza virus. Antiviral drugs are available for influenza, although two of the four FDA-approved antiviral treatments have resulted in significant drug resistance. Therefore, new treatments are being sought to reduce the burden of flu-related illness. The time-consuming development of treatments for new and re-emerging diseases such as influenza and the high failure rate are increasing concerns. In this context, we used an in silico-based drug repurposing method to repurpose FDA-approved drugs as potential therapies against the H7N9 virus. To find potential inhibitors, a total of 2568 drugs were screened. Promacta, tucatinib, and lurasidone were identified as promising hits in the DrugBank database. According to the calculations of MM-GBSA, tucatinib (−54.11 kcal/mol) and Promacta (−56.20 kcal/mol) occupied the active site of neuraminidase with a higher binding affinity than the standard drug peramivir (−49.09 kcal/mol). Molecular dynamics (MD) simulation studies showed that the C-α atom backbones of the complexes of tucatinib and Promacta neuraminidase were stable throughout the simulation period. According to ADME analysis, the hit compounds have a high gastrointestinal absorption (GI) and do not exhibit properties that allow them to cross the blood–brain barrier (BBB). According to the in silico toxicity prediction, Promacta is not cardiotoxic, while lurasidone and tucatinib show only weak inhibition. Therefore, we propose to test these compounds experimentally against the influenza H7N9 virus. The investigation and validation of these potential H7N9 inhibitors would be beneficial in order to bring these compounds into clinical settings.     

LIMITED MEMORY BFGS METHOD FOR NONLINEAR MONOTONE EQUATIONS

In this paper, we propose an algorithm for solving nonlinear monotone equations by combining the limited memory BFGS method （L-BFGS） with a projection method. We show that the method is globally convergent if the equation involves a Lipschitz continuous monotone function. We also present some preliminary numerical results.     

二维多群辐射输运程序LARED-R-1的并行化

利用有向图描述数据依赖关系,应用已有的并行流水线通量扫描算法,实现基于非协调网格的二维辐射输运程序LARED-R-1的并行化.同时,采用消息缓冲技术提高并行程序的性能.经测试,对于典型的问题规模(100群、3800个网格单元、40个方向),在某并行机的64个和128个处理器上,并行程序分别获得80%和53%的并行效率.     

继电器动态过程中动态参数的测试方法

本文介绍了一种测试继电器在动态过程中动态参数测试的方法。采用此方法能直接测量和观察继电器动态过程中的线圈电压、电流 ,同时可测出继电器的动作时间 ,还可了解其接点在接触过程是否有振动现象存在。所以 ,此方法是一种多用途的继电器动态参数测量方法     

Stable edge dislocations in finite crystals

Dislocations have been considered as mechanically unstable defects in bulk crystals, ignoring the Peierls oscillations. Eshelby [J. Appl. Phys. 24 (1953) p.176] had showed that a screw dislocation can be stable in a thin cylinder. In the current work, considering Eshelby's example of an edge dislocation in a single crystalline plate, we show that an edge dislocation can be stable in a finite crystal. Using specific examples, we also show that the position of stability of an edge dislocation can be off-centre. This shift in the stability from the centre marks the transition from a stable dislocation to an unstable one. The above-mentioned tasks are achieved by simulating edge dislocations using the finite element method.     

Photocatalytic Degradation of Paracetamol in Aqueous Medium Using TiO2 Prepared by the Sol–Gel Method

Two titania photocatalysts have been prepared using the sol–gel method using TiCl₄ as a precursor, and two different alcohols, namely, ethanol or propanol (Et or Pr). The main aim of this work was to study the effect of the nature of the alcohol on the chemical, structural and photocatalytic properties for paracetamol photodegradation of the final solids. The TiCl₄/alcohol molar ratio to obtain the corresponding alkoxides (TiEt and TiPr) was 1/10. These alkoxides were calcined at 400 °C to prepare the oxide catalysts (named as TiEt400 and TiPr400). Powder X-ray diffraction (PXRD) of the original samples showed the presence of anatase diffraction peaks in sample TiPr, while TiEt is a completely amorphous material. Contrary to commercial TiO₂-P25, the PXRD diagrams of the calcined samples showed anatase as the exclusive crystalline phase in both solids. The specific surface area (S_BET) of sample TiPr400 was larger than that of sample TiEt400, and both larger than that of TiO₂-P25. The three solids have been tested in the photodegradation of paracetamol in aqueous solution. It has been established that the alcohol used influences the properties and catalytic activity of the final oxides. The synthesized solids exhibit a higher activity than commercial TiO₂-P25, because of their structural characteristics and larger S_BET.     

自悬浮定向流法制备纳米铜微粒及其结构表征

采用自悬浮定向流法制备金属铜纳米微粒,并用TEM,XRD和AES等分析手段研究了铜纳米微粒的形貌、粒度、结构及其表面氧化层特性。结果表明,在一定的参数条件下采用自悬浮定向流法可制备出单晶纳米铜微粒,并且通过工艺参数的调控可达到对微粒粒度的控制。     

过模慢波结构频率反射特性及谐振腔的影响

利用有限元方法求解:S-参数矩阵,研究了过模慢波结构对圆波导TM01,TM02模的反射特性,分析了在慢波结构末端加入谐振腔后,由于两端口的不对称性而造成的对反射特性影响。结果表明,在TM01的π模频率附近,慢波结构和谐振腔组成的系统对无谐振腔一侧端口入射TM01模的反射增大,而对有谐振腔一侧端口入射TM01模的反射减小。根据计算结果,解释了普通多波切伦柯夫振荡器所用慢波结构周期数较多的原因,说明了在多波切伦柯夫振荡器中引入谐振腔后,不但可以减少所用慢波结构周期数,而且有利于提高微波输出效率。     

Experimental Study of Oil Deposition Through a Flow Loop

In this article, the effect of temperature, pressure, and flow rate on deposition rate has been investigated by using chemical analysis method for calculating the deposit thickness and comparing to heat transfer and pressure drop methods. To do so, an experimental high pressure flow loop setup was designed and constructed to conduct various experiments. Caliper readings at the end of each test showed the chemical analysis method in comparison to the heat transfer and pressure drop methods is superior for deposit thickness calculation.     

Modified null field method for P- and SV-wave scattering from a partially debonded fiber

The modified null field approach to elastic P- and SV-wave scattering (in plane strain) from a partially debonded fiber has been developed. The debonded region on the fiber surface is subjected to traction free boundary conditions, whereas the fiber is assumed to be in welded contact with the host medium elsewhere. Additional null field equations for an elliptical extension of the actual surface of the scatterer are introduced which require additional expansions for the field in the region between the extended mathematical boundary and the actual boundary of the scatterer. The numerical accuracy of the modified null field method has been tested for the case of a perfectly bonded fiber for P- and SV-wave incidence. Scattering cross-section plots are presented for different degrees of debonding.