MR diffusion - "diffraction" phenomenon in multi-pulse-field-gradient experiments

Using pulsed-field-gradient (PFG) experiments, the sizes of the pores in ordered porous media can be estimated from the "diffraction" pattern that the signal attenuation curves exhibit. A different diffraction pattern is observed when the experiment is extended to a larger number (N) of diffusion gradient pulse pairs. Simulations to calculate signal values from arbitrary gradient waveforms are performed for diffusion in restricted geometries using a matrix operator formalism. The simulations suggest that the differences in the characteristics of the attenuation curves are expected to make it possible to measure smaller pore sizes, to improve the accuracy of pore size measurements and potentially to distinguish different pore shapes using the N-PFG technique. Moreover, when an even number of PFG pairs is used, it is possible to observe the diffraction pattern at shorter diffusion times and measure an approximation to the average pore size even when the sample contains pores with a broad distribution of sizes.     

Electrical conductivity,optical properties and mechanical stability of 3, 4, 9, 10-perylenetetracarboxylic dianhidride based organic semiconductor

The 3, 4, 9, 10-perylenetetracarboxylic dianhydride (PTCDA) doped polymer films were prepared with Polypyrrole (PPy) and Polyvinyl alcohol (PVA) polymers by solution-casting. The change in structure and chemical composition of samples was identified by XRD and FTIR respectively. The UV–visible spectroscopy demonstrates the optical characteristics and band gap properties of sample. The homogeneous morphology of sample for higher wt% of PTCDA was examined by atomic force microscopy (AFM). The differential scanning calorimetry (DSC) results demonstrate the decrease in melting temperature (T_m) and degree of crystallinity (χ_c%) of polymeric organic semiconductor. The mechanical property demonstrates the high tensile strength and improved plasticity nature. Impedance spectroscopy was evaluated to determine the conductivity response of polymeric organic semiconductor. The highest DC conductivity (2.08×10⁻³ S/m) was obtained for 10 wt% of PTCDA at 140 °C. The decrease in activation energy (E_a) represents the non-Debye process and was evaluated from the slope of ln σ_dc vs. 10³/T plot.     

OPC技术在设备监控系统中的应用

本文主要从0PC技术的定义和对象方面展开,在对OPC技术进行简要介绍的基础上,探讨了0PC服务器与OPC客户端的通信实现,结合实际,着重介绍其在某个iFIX监控平台中的应用。实践结果证明：将OPC技术应用在iFIX监控平台中,可以很好的实现软硬件的兼容,有利于减少软硬件的重复开发,大大的节省了人力、物力,满足了实际需求。     

丁胺包裹的CdSe量子点敏化的TiO2纳米晶薄膜电子转移机制

利用超快光谱技术系统研究了在丁胺包裹的CdSe量子点敏化的TiO₂纳米晶薄膜起始时刻界面间电子转移动力学。与之前的报道不同,该实验结果表明:CdSe量子点经过表面修饰后,两相电子注入机制--热电子和冷电子注入得以被证实,即:电子能分别从CdSe量子点导带中高的振动能级和导带底转移到TiO₂的导带。该机制详细描绘了电子在纳米界面间转移的图景。进一步研究发现:热电子注入的电子耦合强度(3.6±0.1 meV)比弛豫后的基态电子注入高两个数量级,基于Marcus理论,伴随着0.083 eV的重组能,冷电子注入的耦合强度值为~50 μeV。     

The beneficial effects of a p-type GaInN spacer layer on the efficiency of GaInN/GaN light-emitting diodes

Light-emitting diodes (LEDs) with a Mg-doped p-type Ga_1−xIn_xN (0 ≤ x ≤ 0.07) spacer layer located between an undoped GaN spacer layer and the electron blocking layer are investigated. The LEDs are found to have comparable peak efficiency but less efficiency droop when the crystal quality of the p-type Ga_1−xIn_xN spacer layer is well-controlled by lowering the growth temperature and by using a suitable In composition and Mg doping concentration. All LED samples with the p-type spacer layer show a smaller efficiency droop compared to a reference LED having an undoped GaN spacer. Among the sample sets investigated, an optical power enhancement of 12% at 111 A/cm² is obtained when inserting a 5 nm-thick p-type Ga_0.97In_0.03N spacer layer. The results support that carrier transport is the key factor in the efficiency droop observed in GaN-based LEDs.     

Prototype electrochromic device and dye sensitized solar cell using spray deposited undoped and ‘Li’ doped V2O5 thin film electrodes

Lithium (Li) (0–5 wt%) doped V₂O₅ thin films were spray deposited at 450 °C onto ITO substrates. Structural analysis using X-ray diffraction and Raman spectroscopy revealed orthorhombic phase of the films. In addition to the V₂O₅ phase, presence of VO₂ peaks due to high deposition temperature is also evident from structural and optical characterization. The non-stoichiometric nature of the films due to loss of the terminal O atom was confirmed from Raman spectroscopy. The direct band gap, indirect bandgap, and phonon energies were also calculated from optical studies. Different charge states of vanadium ions present in the film were identified from X-ray photoelectron spectroscopy study. Results from cyclic voltammetry experiments reflected significant differences between the undoped and Li doped V₂O₅ samples. Transport properties by Hall-effect measured at room temperature indicated significant increase in conductivity, carrier concentration and mobility of V₂O₅ thin films on doping with Li. A Dye Sensitized Solar Cell (DSSC) was fabricated using mobility enhanced 5 wt% Li doped V₂O₅ film as photoanode and its efficiency was found to be 2.7%. A simple electrochromic cell is fabricated using undoped V₂O₅ thin film to demonstrate the colour change.     

Investigation of laterally single-diffused metal oxide semiconductor (LSMOS) field effect transistor

We propose a distinct approach to implement a laterally single diffused metal-oxide-semiconductor (LSMOS) FET with only one impurity doped p-n junction. In the LSMOS, a single p-n junction is first created using lateral dopant diffusion. The channel is formed in the p region of the p-n junction and the n region acts as the drift region. Two distinct metals of different work function are used to form the “n⁺” source/drain regions and “p⁺” body contact using the charge plasma concept. We demonstrate that the LSMOS is similar in performance to a laterally double diffused metal-oxide-semiconductor (LDMOS) although it has only one impurity doped p-n junction. The LSMOS exhibits a breakdown voltage of ∼50.0 V, an average ON-resistance of 48.7 mΩ-mm² and a peak transconductance of 53.6 μS/μm similar to that of a comparable LDMOS.     

Hermetic Seal of Organic Light Emitting Diode with Glass Frit

The components of OLED encapsulation with hermetic sealing and a 1026-day lifetime were measured by PXI-1033. The optimal characteristics were obtained when the thickness of the TPBi layer was 20 nm. This OLED obtained a maximum luminance (Lmax) of 25,849 cd/m² at a current density of 1242 mA/cm², an external quantum efficiency (EQE) of 2.28%, a current efficiency (CE) of 7.20 cd/A, and a power efficiency (PE) of 5.28 lm/W. The efficiency was enhanced by Lmax 17.2%/EQE 0.89%/CE 42.1%/PE 41.9%. The CIE coordinates of 0.32, 0.54 were all green OLED elements with wavelengths of 532 nm. The shear strain and leakage test gave results of 16 kgf and 8.92 × 10⁻⁹ mbar/s, respectively. The reliability test showed that the standard of MIL-STD-883 was obtained.