基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

Memory switching of germanium tellurium amorphous semiconductor

The dc conductivity and switching properties of amorphous GeTe thin film of thickness 262 nm are investigated in the temperature range 303-373 K. The activation energy ΔE_σ, the room temperature electrical conductivity σ_RT and the pre-exponential factor σ₀ were measured and validated for the tested sample. The conduction activation energy ΔE_σ is calculated. The I-V characteristic curves of the thin film samples showing a memory switching at the turnover point (TOP) from high resistance state (OFF state) to the negative differential resistance state (NDRS) (ON state). It is found that the mean values of the threshold electrical field E_th decreased exponentially with increasing temperatures in the investigated range. The switching activation energy ΔE_th is calculated. Measurements of the dissipated threshold power P_th and the threshold resistance R_th were carried out at TOP point at different temperatures of the samples. The activation energies ΔE_R and ΔE_P caused by resistance and power respectively are deduced. The results obtained support thermal model for initiating switching process in this system.     

光纤环形外腔半导体激光器频偏特性研究

本文给出了在环形光纤外腔光反馈之下半导体激光器频偏特性的小信号分析理论.分析表明,尤其在千兆赫以下的调制频段中,耦合腔相移、内外腔光耦合强度及内外腔光场相位失谐对频偏功率比均有显著影响.可望用作强度调制直接检测高速率、长距离光纤通信系统中的光源.     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.     

线性时滞系统实用稳定性的一个简明判据

利用比较的方法，获得了线性时滞系统实用稳定性的一个简单判定定理．     

Interval parameter perturbation method for evaluating the bounds on natural frequencies of structures with interval parameters

For structural parameters with uncertainties, interval mathematics can, in the case where the probabilistic distribution density of uncertain variables is unavailable, deal with the influence of uncertainties in structural parameters on the response of structures. In order to evaluate the region containing natural frequencies of structures with interval parameters, the interval parameter perturbation method is presented in this paper. The advantage of the present method is its computational efficiency in evaluating the region containing natural frequencies. A numerical example is used to illustrate the efficiency of the method proposed. The project is supported by National Youth Natural Science Foundation of China and National Outstanding Youth Science Foundation of China.     

聚合物电致发光材料研究进展

本文较详细地综述了聚合物电致发光材料的研究进展，重点介绍了聚对苯撑乙烯（ＰＰＶ），并提出了有关聚合物电致发光材料及器件构造研究的一些观点。     

一种自制的蒸馏水器保护装置

本装置由检测、控制、执行、报警和电源五部分组成。检测部分采用了靠正常水位导通的两根信号线。当蒸馏水器在正常运行时遇停水,本装置可立即实现断电保护,同时发出声光报警,有效防止干烧,杜绝事故发生。本装置制作简便,元器件均为市售,成本低廉,性能可靠。     

自旋交叉配合现象与分子电子器件

自旋交叉配合物在热、压力或光诱导自旋交叉现象的同时会伴随着其它一些协同效应，比如配合物颜色的改革、存在着大的热滞后效应等，这些协同效应是单个分子或分子集合体作为热开关、光开关和信息存储元件材料的基础。因此，自旋交叉配合物是开发新型的热开关、光开关和信息存储元件材料的理想分子体系。本文概述了自旋交叉现象的研究历史、现状和未来的发展趋势。讨论了影响配合物自旋交叉性质的各种内在的和外部的因素，总结了目前用于研究自旋交叉现象的各种现代测试技术。最后，展望了自旋交叉配合物在分子电子器件方面的应用前景。     

Comparison of procedures for correction of matrix interferences in the multi-element analysis of soils by ICP-AES with a CCD detection system

Three procedures, matrix matching, plasma optimisation and single-point standard-addition, have been evaluated to ascertain the best procedure for simultaneous multi-element analysis of industrial soils by ICP-AES with CCD detection. A standard reference material, CRM143 from the Bureau Communautaire de Réference (BCR), has been analysed for Cd, Cr, Cu, Mn, Ni and Pb using the three different matrix interference correction procedures. All three procedures give comparable results which are in good agreement with the BCR values, except for Cr. The single-point standard addition procedure was chosen, on the basis of economy and ease of implementation, to correct for matrix interferences in the determination of Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sn and V in soil samples collected from an industrial site in England. Concentrations of some of the elements were found to vary greatly with sampling depth. For example, the concentration of Mn, determined using the atomic line at 279.920 nm, increased from 426 ± 3 g/g at a depth of 18–28 cm to 5996 ± 144 g/g at 60–85 cm.