基于马赫-曾德尔干涉仪的单个光子操控

分别利用空间和光纤马赫—曾德尔干涉仪对空间和光纤传输中的单个光子的干涉现象进行了研究,干涉对比度可达到90％以上,实现了空间和光纤中的单个光子的路由操控。实验采用脉冲调制加衰减的方法产生单个光子,获得了每个脉冲中只包含0．1个光子的准单光子源。通过改变压电换能器的电压控制马赫—曾德尔干涉仪的单个光子在两个输出端的选择,实现了光子在节点上的路由。采用同步符合检测技术,利用重复频率为1kHz,脉冲宽度为100ns的同步信号对输出信号进行符合,实现了量子效率高于70％,暗计数小于0．2s^-1的单光子高灵敏度检测,观测到了单个光子在相位操控下出射到两个输出端的有序分配现象。验证了基于马赫—曾德尔干涉仪的单个光子路由操控实现的可能性。     

GA-based optimization of a MIMO ANC system considering coupling of secondary sources in a telephone kiosk

In this paper a multi-input, multi-output (MIMO) active noise control system with the aim of global reduction of broadband noise in a telephone kiosk is addressed. The model selected for this optimization problem is the acoustic environment of an enclosure taking into account the effect of coupling of secondary sources used for control purpose. This optimization involves finding the best locations for loudspeakers and microphones inside the enclosure as well as optimizing the control signals considering secondary source coupling.Previous results show that in order to be able to reduce acoustic noise globally inside the enclosure, the frequency range of 50-300 Hz must be selected for control purpose. The mean of acoustic potential energy of the enclosure, when excited in this frequency range, is adopted as a performance measure. This performance index is penalized with the power of the signal required to excite secondary loudspeakers, in order to avoid placements that may need high voltage power amplifier for a desired performance. To find the solution of this problem, i.e. the global minimum of the performance index, several genetic algorithms are proposed and compared. In order to attain the best achievable performance in reaching the global minimum, the parameters of these genetic algorithms are tuned, and used for optimization purpose. Numerical simulations of the acoustical potential energy as well as the sound pressure at different heights of the kiosk, when active noise control (ANC) system operates, confirm the optimality of the locations proposed by the genetic algorithm.     

光栅莫尔条纹在机床数控改造中的应用研究

从机床数控改造的实际出发，针对我国目前国产机床加工精度普遍不高，数控化程度较低等问题，提出了一种全新的设计方案，利用光栅作为位置检测元件，形成全闭环控制系统，结果表明既能够大大提高零件的加工精度，又能节省改造成本，为机床数控改造提供了参考。     

电化学沉积Fe单晶纳米线生长中的取向控制

利用电化学沉积方法，发现了一种能够动态地控制铁纳米线生长方向的沉积方法，利用该方法沉积了包括［110］取向，［200］取向及非晶态三种结构和取向的一维Fe纳米线阵列.对于三种纳米线阵列，测量了它们的磁特性，分析发现具有[200]择优取向纳米线阵列的方形度，各向异性特性和矫顽力都比[110]取向阵列有很大的改善. 关键词： 磁性纳米线 电化学沉积 取向控制     

凸透镜焦距测量方法的探索简

凸透镜焦距的测量方法和不确定度评价已经有很多研究,本文着重研究测量方法,提出了应用实物成虚像、虚物成实像方法来测量凸透镜的焦距,并与实物成实像方法进行比较和分析。本文的实验研究拓展了透镜焦距测量的方法,同时更加深入研究了透镜成像的规律,开拓了实验思路。     

统一混沌系统的控制

对统一混沌系统建立了自反馈控制、错位反馈控制和自适应控制方法，在理论上给予严格证明，数值仿真表明这些方法是很有效的.还纠正了文献［１０］的某些不足. 关键词： 统一混沌系统 反馈 自适应 控制 Routh-Hurwitz定理     

Coherent beam combination of adaptive fiber laser array with tilt-tip and phase-locking control

We present an experimental study on tilt-tip(TT) and phase-locking(PL) control in a coherent beam combination(CBC) system of adaptive fiber laser array.The TT control is performed using the adaptive fiber-optics collimator(AFOC),and the PL control is realized by the phase modulator(PM).Cascaded and simultaneous controls of TT and PL using stochastic parallel gradient descent(SPGD) algorithm are investigated in this paper.Two-fiber-laser-,four-fiber-laser-,and six-fiber-laser-arrays are employed to study the TT and PL control.In the cascaded control system,only one high-speed CMOS camera is used to collect beam data and a computer is used as the controller.In a simultaneous control system one high-speed CMOS camera and one photonic detector(PD) are employed,and a computer and a control circuit based on field programmable gate array(FPGA) are used as the controllers.Experimental results reveal that both cascaded and simultaneous controls of TT using AFOC and PL using PM in fiber laser array are feasible and effective.Cascaded control is more effective in static control situation and simultaneous control can be applied to the dynamic control system directly.The control signals of simultaneous PL and TT disturb each other obviously and TT and PL control may compete with each other,so the control effect is limited.     

利用法布里-珀罗腔抑制电光相位调制中的剩余幅度调制

激光经电光相位调制后,由于剩余幅度调制的存在造成调制边带幅度不相等。利用法布里-珀罗腔的透射特性和Pound-Drever-Hall技术对通过法布里-珀罗腔的调制光正、负一级边带的幅度产生不同的衰减,使得调制边带的幅度相等,从而实现对电光相位调制中剩余幅度调制的抑制。采用该方法,理论上计算了调制光经法布里-珀罗腔后的光外差光谱信号,获得锁定法布里-珀罗腔后调制边带幅度的不对称度较腔锁定前减小四个数量级。实验研究了调制光经法布里-珀罗腔透射的光外差光谱,结果表明将法布里-珀罗腔锁定于该透射光外差光谱中心零位时,对剩余幅度调制的抑制程度可达45 dB。     

Adaptive synchronization of chaos in permanent magnet synchronous motors based on passivity theory

An adaptive synchronization control method is proposed for chaotic permanent magnet synchronous motors based on the property of a passive system. We prove that the controller makes the synchronization error system between the driving and the response systems not only passive but also asymptotically stable. The simulation results show that the proposed method is effective and robust against uncertainties in the systemic parameters.     

用二级控制法对二维连续体进行形状优化

二级控制的意思是在自然设计变量和有限元网格节点之间加入设计单元,建立自然设计变量控制关键点坐标,关键点控制有限元网格节点,共两层控制关系。后一层控制关系借助有限元形函数描述设计单元,并引入相应的参数坐标,从而实现敏庋分析、结构形状变化的控制和网格的变动控制。本文使用二级控制理论有效地解决了二维连续体结构形状优化的一些困难,将形状优化问题处理成序列二次规划问题求解。使用MSC／PCL语言在MSC／Patran＆Nasntran平台上实现了优化模块的二次开发。本文设计思路的可行性和程序的有效性通过若干算例得到证实。