Fuzzy-PID分级控制变水量空调系统温度的研究

针对变水量空调系统温度控制的时变、大滞后、非线性特点,结合模糊控制和PID控制,设计了基于模糊规则切换的Fuzzy-PID分级控制器,并在Matlab/Simulink软件上进行了仿真。仿真结果表明,控制器同时具有模糊控制超调量小、鲁棒性好和PID控制精度高、响应速度快的优点。     

Gap formulas for closed linear relations

A classical formula for the gap between two densely defined closed operators in a Hilbert space is extended to the case of linear relations. Copyright © 2014 John Wiley & Sons, Ltd.     

4类图完美匹配数目的递推求法

本文研究了4类特殊图完美匹配数目的显式表达式.利用划分,求和,再递推的方法分别给出了图3-n Z4,2-n(2-C6),2-n(2-K4)和3-n(C4-C6)的完美匹配数目的计算公式.     

Circumventing the OCl versus OOH scaling relation in the chlorine evolution reaction: Beyond dimensionally stable anodes

The development of selective electrocatalysts for the chlorine evolution reaction (CER) is majorly restrained by a scaling relation between the OCl and OOH adsorbates, rendering that active CER catalysts are also reasonably active in the competing oxygen evolution reaction (OER). While theory predicts that the OCl versus OOH scaling relation can be circumvented as soon as the elementary reaction steps in the CER comprise the Cl rather than the OCl adsorbate, it was demonstrated recently that PtN₄ sites embedded in a carbon nanotube follow this theoretical prediction. Advanced experimental analyses illustrate that the PtN₄ sites also reveal a different reaction kinetics compared to the industrial benchmark of dimensionally stable anodes (DSA). A reverse Volmer–Heyrovsky mechanism was identified, in which the rate-determining Volmer step for small overpotentials is followed by the kinetically limiting Heyrovsky step for larger overpotentials. Since the PtN₄ sites excel DSA in terms of activity and chlorine selectivity, we suggest the Cl intermediate as well as the reverse Volmer–Heyrovsky mechanism as the design criteria for the development of next-generation electrode materials beyond DSA.     

Grey relational analysis for optimization of wear parameters and surface roughness on nano composite coating

The higher wear resistance of Ni based nano composite coatings makes them potential replacement in protecting the substrate materials. The role of surface roughness of the coating along with wear parameters on the specific wear rate, pin temperature, and COF are addressed in the present study. The use of hard nano Al₂O₃ particles found significant role in increasing the resistance to wear for Ni matrix coatings on Al6061 material. The resistance to dislocation offered by these nano Al₂O₃ particles and smear out of debris with plastic deformation indicated abrasive and adhesive nature of wear mechanism in combination. The optimization of wear parameters are carried out by surface response method based grey relation analysis. The normal load applied onto the pin has significant influence on the specific wear rate and temperature rise in the pin. The surface roughness of the coating has also found instrumental in the higher pin temperature and friction coefficient.     

分布式航天器真空热试验测控系统设计

针对航天器真空热试验对数据采集、温度控制及系统功能的要求,设计开发了一套基于LXI总线的分布式测控系统。针对目前控制系统对于温度控制系统大滞后、非线性的控制性能不佳的缺点,采用模糊自整定PID算法提升了当前控制系统的控制品质,实现了对航天器的外热流模拟与温度控制。实际运行结果表明,该系统具有可靠性高、扩展性强、控制精度高等优点,并且试验准备时间比原有系统减少一半以上,提高了试验人员的工作效率。     

A new high frequency dynamic mechanical analysis system: An approach to direct high frequency testing of tire tread rubber

Dynamic Mechanical Analysis (DMA) systems are measurement devices for obtaining master curves and complex modules of viscoelastic materials, such as rubbers. The conventional DMAs measurement systems in market have several limitations, which restrict their ability for operating at high frequencies. Thus, Williams, Landel and Ferry (WLF) relation is used to produce master curves and predict the material properties at high frequencies. In conventional DMAs, experiments are done in a range of temperatures, and then a master curve is made for a chosen reference temperature by shifting the measurements data to high frequencies. Therefore, the obtained results, which are not based on direct measurements, can be inaccurate. In order to overcome this problem a new simple shear high-frequency DMA (HFDMA) system is designed and built to directly measure the dynamic mechanical properties of viscoelastic material at high frequencies and the strain levels sufficient for tire manufacturers. The new HFDMA can be used to test any viscoelastic materials which have glass transmission temperature (Tg) lower than room temperature (about 23 °C) such as the Styrene-butadiene rubber (SBR). The SBR is the base material for tire tread. The designing process of this new HFDMA is presented in this paper. The rubber specimen shape is chosen by taking into account the shear elastic wave effect, bending, buckling effect and heat generation in the specimen. The repeatability test is accomplished to ensure that the results obtained from the new HFDMA are repeatable and the repeatability uncertainty is about 0.04%. The new HFDMA is validated by comparing to the direct test results of conventional DMA at 100 Hz. The direct high frequency (5 kHz) complex shear modulus and damping factor are compared with the master curve of the conventional DMA developed by the use of WLF relation for SBR. This comparison revealed that the complex shear modulus and damping factor of the SBR obtained from the HFDMA at 5 kHz and 0.05% strain amplitude are about 7% and 6.5% higher than those obtained from the conventional DMA, respectively.     

Unidimensional continuous-variable quantum key distribution with discrete modulation

In this paper, we proposed an unidimensional continuous-variable quantum key distribution (CV-QKD) protocol with discrete modulation, which waives the necessity in one of the quadrature modulations and further simplified the implementation of the CV-QKD protocol. On the basis of the Heisenberg uncertainty relation, we analyze the boundary between the unphysical and physical region. Besides, we utilize a novel proof approach to achieve a lower bound valid of transmission distance. This scheme shows an available method to further simplified the implementation of the QKD.     

基于物理中面FGM板屈曲的有限元分析

基于物理中面的概念,根据最小势能原理推导了功能梯度材料FGM薄板屈曲的有限元控制方程,求得临界荷载的有限元解。利用FGM板的屈曲方程与参考均匀板的屈曲方程之间的相似性,建立了FGM板的临界荷载与参考均匀板的临界荷载之间的相似转换关系式,从而将FGM板临界荷载的计算转变为参考均匀板的临界荷载和材料不均匀系数的计算,极大地提高了计算效率,为FGM的推广起积极的推动作用。通过数值算例,将由有限元法和转换关系式得到的临界荷载进行了比较,并讨论了边界条件、荷载工况、材料组成和几何尺寸等对FGM板临界荷载的影响。     

Entropic uncertainty relation of a qubit-qutrit Heisenberg spin model and its steering

We investigate the quantum-memory-assisted entropic uncertainty relation (QMA-EUR) in a Heisenberg XYZ mixed-spin (1/2, 1) model. Coupling strength, Dzyaloshinskii-Moriya (DM) interaction and inhomogeneous magnetic field, respectively, contributing to QMA-EUR by a thermal entanglement in the hybrid-spin model are studied in detail. Furthermore, we compare the uncertainty of the bipartite hybrid model with those of qubit-qubit and qutrit-qutrit systems. Meanwhile, the effects of local PT-symmetric operation and weak measurement on the steering of entropic uncertainty are analyzed. We find that the local PT-symmetric operation can reduce the entropic uncertainty, and the entropic uncertainty can also be decreased by weak measurement reversal.