Acoustic characterization and prediction for fan-duct-plenum-room integrations

This paper investigates mutual influence of duct and room acoustics in the whole fan-duct-plenum-room integrations. Applying the parametric design language of finite element software ANSYS (APDL), dimensional and positional influence on system acoustics has been studied. Models with different room dimensions, duct lengths, duct cross-sections, duct locations, duct discharges and duct elbow were constructed, and their characteristics were compared qualitatively. Results show that small rooms, short ducts, large duct cross-sections and bell mouth duct discharges help to increase room sound pressure levels (SPLs); SPLs in ducts and plenums are sensitive to duct dimensions and duct discharge types but insensitive to duct locations and room dimensions; duct elbows have relatively indistinct acoustic influence in each component. Based on the calculation results, a semi-experimental method was proposed for simply and approximately evaluating indoor acoustic spectra of fan-duct-plenum-room integrations, then an example was used to demonstrate the prediction process. Finally, by adopting several ideal models, sound field constitutions, duct and room wall admittances and duct end reflection were explored quantitatively. This study may give a detailed understanding of fan-duct-plenum-room acoustics for researchers, also it might provide a new, simple and approximate prediction method for professionals to evaluate and improve fan-ducted acoustics.     

Bayesian Prediction Analysis for Growth Curve Model Using Noninformative Priors

We apply a Bayesian approach to the problem of prediction in an unbalanced growth curve model using noninformative priors. Due to the complexity of the model, no analytic forms of the predictive densities are available. We propose both approximations and a prediction-oriented Metropolis-Hastings sampling algorithm for two types of prediction, namely the prediction of future observations for a new subject and the prediction of future values for a partially observed subject. They are illustrated and compared through real data and simulation studies. Two of the approximations compare favorably with the approximation in Fearn (1975, Biometrika, 62, 89–100) and are very comparable to the more accurate Rao-Blackwellization from Metropolis-Hastings sampling algorithm.     

用力敏传感器测量乙醇水溶液的表面张力系数与浓度的关系

用硅压阻式力敏传感器测量了纯水、乙醇的表面张力系数，并测量了不同浓度的乙醇水溶液的表面张力系数，得到了乙醇水溶液的表面张力系数随浓度的变化曲线．     

用板式电势差计测量电池的电动势和内阻实验的改进

分析了在“用板式电势差计测量电池的电动势和内阻”实验中 ,由于待测干电池的电动势和内阻在实验过程中均不为恒定值而引起的误差 ,依据电化学理论和电阻构成解释了实验现象 ,并给出了实验改进方案 .     

水平管外强化凝结传热的数值解

以Nusselt理论为基础,运用三维坐标建立了肋片侧面的冷凝传热模型,对肋片侧面的冷凝传热机理进行了分析,得出了肋片侧面表面传热系数的积分表达式。利用此法对水平环肋单管表面传热系数进行计算并将结果与传统解法进行比较。     

高功率固体激光放大系统相位自校正方法研究

就光学元件间低频相位误差叠加提出用相关系数作为叠加相位结果的估计参量，并通过模拟计算和验证实验证明了相关系数能有效地对低频相位叠加结果进行比较估计，在此基础上就高功率固体激光放大系统中放大片的选取和安装提出了自校正方法并实现了自校正过程。     

Half-width temperature dependence of nitrogen broadened lines in the ν2 band of H2O

Forty-seven N₂ broadened water vapor line-widths have been measured in the 1845-2140 cm⁻¹ spectral range with a Fourier Transform spectrometer in the 258-330 K temperature range at a spectral resolution of 0.005 cm⁻¹ for the lines with upper state rotational quantum number up to 16. The measured exponents of the temperature dependence of the width exhibit a large range of values from 1.60 to −0.86. Theoretical calculations were made using a semi-empirical technique based on the Anderson theory. The calculated broadening coefficients as well as the temperature exponents for the half-width agree satisfactory with measured values.     

地面附近的高空核爆电磁脉冲环境

 主要研究在高空核爆的双指数类型电磁脉冲平面波入射时，地面附近的电磁脉冲环境。计算给出了在不同入射波状态，不同地表介质电气特性和距地面不同高度等条件下的电磁脉冲环境参数，归纳了一些规律性认识。结果显示：地面附近的电场会随距地面高度的不同而发生显著的变化，对于水平场分量，其反射场总是试图抵消入射场，而对于垂直场分量，其反射场叠加在入射场上，使得地面附近的垂直场强幅值一般大于入射波场强幅值；当入射波仰角增大时，合成电场波形的脉冲宽度会变宽；地表介质的电气特性参数不同也会对地面附近电场的波形和幅值造成一定的影响。     

湖南省各市州经济发展水平评价

本文利用主成分分析法分析了湖南各市州的经济发展水平和经济综合实力,对湖南省14个市州的经济发展情况做出综合评价,得出了各市州在湖南省的经济地位.最后用系统聚类分析法进行了验证,结果表明用多元统计分析法来评价地区经济发展水平是可行的.     

Intrinsic thermal stability and quenching recovery of thin-film superconductors with thermal boundary resistance

The stability behaviour of a thin-film superconductor under a localized release of thermal disturbance is investigated. Two-dimensional conjugate film/substrate conduction equation with anisotropic thermal conductivity of the film, and Joule heat are employed to investigate effects of substrate and thermal properties on the intrinsic stability and quenching recovery. To consider the thermal boundary resistance between film and substrate, an interfacial-layer model (ILM) with very low diffusivity and an acoustic mismatch model (AMM) are employed. Results show that the thermal boundary resistance influences strongly the intrinsic stability. Thermal boundary resistance increases intrinsic stability if the thermal conductivity of the substrate or the disturbance energy is large. Higher Biot numbers and thermal conductivity ratios of film to substrate in longitudinal direction influence stability favorably. We demonstrate also that operation of a film/substrate system, such as YBCO/MgO, is either intrinsically stable or irrecoverably unstable.The authors wish to express their sincere appreciation to Dr. R. C. Chen for his invaluable advice and suggestions during the course of this paper. This research was supported by the National Science Council of the R. O. C. through grant NSC 83-0401-E-009-006. The computations were performed on the IBM ES/9000 at the National Center For High-Performance Computing.