晶体硅太阳电池双层电极优化分析与实验研究

相对于单层电极结构,优化的前表面双层电极能够明显减小功率损失,改善晶体硅太阳电池的电学特性．本文对晶体硅太阳电池的双层电极进行了优化分析和实验研究.通过扫描电子显微镜观测将双层电极的截面抽象为更接近于实际的半椭圆型,建立了太阳电池前表面的双层电极模型,理论分析了双层电极的电学损失和光学损失.结合丝网印刷后光诱导电镀太阳电池的实验,得到了理论和实验上的最优化光诱导电镀增厚电极厚度与丝网印刷电极宽度的关系.所得到的理论和实验结果符合良好.由于并不涉及电极制备的具体技术,双层电极理论模型普遍适用于多种类型的双层电极结构.     

Non-Amontons behavior of friction in single contacts

We report on the frictional properties of a single contact between a glassy polymer lens and a flat silica substrate covered either by a disordered or by a self-assembled alkylsilane monolayer. We find that, in contrast to a widely spread belief, the Amontons proportionality between frictional and normal stresses does not hold. Besides, we observe that the velocity dependence of the sliding stress is strongly sensitive to the structure of the silane layer. Analysis of the frictional rheology observed on both disordered and self-assembled monolayers suggests that dissipation is controlled by the plasticity of a glass-like interfacial layer in the former case, and by pinning of polymer chains on the substrate in the latter one.     

三维光滑接触界面上的分配参数滑移面算法

针对三维滑移界面上的分配参数滑移算法,提出一种三维滑移面光滑目的 ,仅根据单元面顶点的坐标和法向等局部信息,构造出曲面片边界G¹连续(切平面连续),曲面片内C¹连续的三维光滑曲面,此目的 为实际的滑移面提供一个准确的几何表达.在此光滑曲面上构建了具有C¹连续的法向压力场和质量面密度场.然后在光滑滑移界面上通过Newton-Raphson迭代计算接触点,依据分配参数滑移算法施加接触约束和接触计算.数值算例显示光滑的接触滑移面可以减少滑移节点的振动,提高计算的收敛性.     

Surface modification and characterization of magnesium hydroxide sulfate hydrate nanowhiskers

In order to enhance the compatibility with plastic polymers, magnesium hydroxide sulfate hydrate (MHSH) nanowhiskers were modified through grafting methyl methacrylate (MMA) on the surface of the nanowhiskers by emulsion polymerization. The influences of the reaction time, MMA monomer content, adding speed of monomer and the reaction temperature on the grafting ratio were investigated. Thermogravimetry (TG), Fourier transform infrared (FT-IR) spectroscopy, X-ray powder diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray (EDX) spectroscopy and surface contact angle measurement were used to characterize the effect of surface modification. The results showed that the MHSH nanowhiskers were uniformly coated by polymethyl methacrylate (PMMA), and a well-defined core-shell hybrid structure of MHSH/PMMA was obtained. The surface contact angle of the hybrid whiskers increased to 87.32° from 12.71° and the whiskers surface was changed from hydrophilic to lipophilic.     

Improving mechanical properties of a-CNx films by Ti-TiN/CNx gradient multilayer

Amorphous carbon nitride (a-CN_x) films with functional gradient Ti-TiN/CN_x underlayer were deposited by direct current magnetron sputtering. Microstructure and composition of the films were characterized by means of X-ray diffraction (XRD), Raman spectroscopy, atomic force microscope (AFM) and transmission electron microscopy (TEM). Mechanical and tribological properties were investigated by nanoindenter, scratch and ball-on-disk tribometer. The a-CN_x-based films suffer a graphitization process with the increasing deposition temperature, thus the hardness and elastic modulus decrease. With the design of the Ti-TiN/CN_x gradient underlayers, some important advantages of relatively thick CN_x films can be achieved, such as increased hardness, improved adhesion strength, and the wear resistance of the a-CN_x-based films can be also improved significantly.     

基于平底孔反射体的双晶直探头测量模型

双晶探头在无损检测领域有着重要的应用,因而有必要建立一个超声测量模型来深入了解这类换能器的特点.通过将一个基于传递矩阵的多高斯声束模型和一个基尔霍夫近似方法获得的散射模型有效结合,建立了一个完整的纵波双晶直探头测量模型,用于预测平底孔缺陷体的回波信号.对比分析了平底孔反射回波信号的模型计算结果与实验测量结果,验证了该测量模型的准确性. 关键词： 超声测量模型 双晶直探头 多高斯声束模型     

考虑壁面接触效应的微流动数值模拟

使用level set和volume of fluid(VOF)方法对考虑壁面接触效应的不可压缩两相微流动进行数值模拟.对于level set方法,计算基于MAC网格,使用二阶投影算法求解二维Navier-Stokes(N-S)方程和level set函数方程;对于VOF方法,通过引入计算网格内的体积分数,将流场的参数转化为体积平均值,界面的形状由体积分数连续方程的解决定.给出一些计算实例,并和现有的实验结果进行比较.     

双"单电桥"法测量低电阻中的实用技巧例举

主要介绍了双"单电桥"法测量低电阻的基本原理与双"单电桥"法测量低电阻的几种实用技巧.     

Asymptotic stability of viscous contact wave to a radiation hydrodynamic limit model

This paper is concerned with the large time behavior of the solutions for 1D radiation hydrodynamic limit model without viscosity and its asymptotic stability of the viscous contact discontinuity wave under the smallness assumption of the strength of the contact wave and initial perturbations. The present pressure includes a fourth-order term about the absolute temperature from radiation effect which brings the main difficulty. Furthermore, the dissipative of the system is weaker for the lack of viscosity. All these make the problem more challenging. The prove is mainly based on the energy method, including normal and radial directions energy estimates.     

基于YAG透明陶瓷制作衍射光栅元件的研究

研究并制作了以钇铝石榴石(YAG)透明陶瓷为基底材料的衍射光栅元件。通过磁控溅射技术在YAG透明陶瓷表面溅射一层均匀致密的金属铬,获得带有硬掩模的陶瓷样品。借助接触式曝光系统进行光刻,反复试验,获得带有衍射光栅的YAG透明陶瓷样品。经光学轮廓仪检测,样品铬膜厚0.072 m,光栅细节得到完好保留。实际光栅的衍射图样再次验证了以YAG透明陶瓷代替传统微光刻基底材料制作衍射光栅的可行性,使得衍射光栅在更为复杂的环境下发挥作用成为可能。