基于窗口傅里叶变换剪切干涉法波前检测

提出了一种利用二维窗口傅里叶变换从径向剪切干涉条纹中准确得到波前的重建技术。首先对剪切干涉条纹做二维窗口傅里叶变换,设置阈值和频率积分范围后,进行二维窗口傅里叶逆变换,然后对包裹相位做去载频和相位展开处理得到相位差分布,最后使用波前迭代算法从相位差中复原实际波前。模拟计算表明,使用该方法最大相位复原误差为0.82%,均方根值为0.020 9 rad,实验结果验证了该方法的有效性。同时也对窗口傅里叶变换的关键参数,如窗函数的选择、窗口大小的确定以及阈值的选取等进行了简要讨论。与传统傅里叶变换法(FFT)相比,基于窗口傅里叶变换的剪切干涉波前检测法有更高的精度和稳定性,为波前检测提供一种新的处理方法。     

傅里叶变换实时红外光谱复原的FPGA实现

为实时获取战场激光、大气污染物气体、毒气等待测物光谱信息的光谱复原,设计了基于现场可编程门阵列(FPGA) 的实时光谱采集分析系统。该系统选用迈克尔逊干涉具和碲镉汞探测器获取待测光谱信息,将采集到的数据传入FPGA。利用硬件描述语言VerilogHDL在Xilinx FPGA芯片上依据傅里叶变换(FFT)实现干涉条纹到光谱数据的实时处理。实验结果表明,FPGA实际计算1 024点基2-FFT频谱分布信息与Matlab理论计算结果相同,可满足实时光谱探测的要求。     

Heat Convection Between Two Confocal Elliptic Tubes Placed at Different Orientations

In this paper, transient and steady natural convection heat transfer in an elliptical annulus has been investigated. The annulus occupies the space between two horizontal concentric tubes of elliptic cross-section. The resulting velocity and thermal fields are predicted at different annulus orientations assuming isothermal surfaces. The full governing equations of mass, momentum and energy are solved numerically using the Fourier Spectral method. The heat convection process between the two tubes depends on Rayleigh number, Prandtl number, angle of inclination of tube axes and the geometry and dimensions of both tubes. The Prandtl number and inner tube axis ratio are fixed at 0.7 and 0.5, respectively. The problem is solved for the two Rayleigh numbers of $10^4$ and $10^5$ considering a ratio between the two major axes up to 3 while the angle of orientation of the minor axes varies from $0^\circ$ to $90^\circ$. The results for local and average Nusselt numbers are obtained and discussed together with the details of both flow and thermal fields. For isothermal heating conditions, the study has shown an optimum value for major axes ratio that minimizes the rate of heat transfer between the two tubes. Another important aspect of this paper is to prove the successful use of the Fourier Spectral Method in solving confined flow and heat convection problems.     

A subfringe integration method for multiple-beam Fizeau fringe analysis

Some aspects concerning the subfringe integration method in interferogram analysis have been investigated and modified. The modified algorithm, introduced in this paper, is capable of reconstructing the phase in the presence of noise or errors in carrier frequency. The subfringe integration method was applied to analyze two computer simulated patterns of equispaced Fizeau fringes using N bucket integration. Also, it is used to analyze the multiple-beam Fizeau fringe. The refractive index profile of polyethylene fiber is obtained by using two methods, subfringe integration method, and Fourier transform method. A comparison between the obtained results using the maintained methods is presented.     

利用频闪结构光测量旋转叶片的三维面形

在对快速甚至高速运动物体进行研究时,需要对运动物体各个时刻的三维面形和形变量进行数字化描述。提出了一种利用频闪光作为结构照明光源,基于傅里叶变换轮廓术对旋转叶片每个时刻的三维面形和变形量进行动态测量的光学方法。使用自行设计的同步控制单元对风扇叶片旋转位置进行检测,用该检测信号同步驱动频闪结构光源的发光和图像采集系统“冻结”记录下旋转叶片表面变形条纹的瞬时图像,再运用傅里叶变换轮廓术计算出每一瞬间时刻旋转叶片的三维面形,分析这些三维面形数字化结果可以进一步得到旋转叶片的变形量。通过对家用电风扇的实验,验证了该方法的合理性和可行性。该方法可望在高速运动物体的面形和变形研究上有广泛运用。     

傅里叶变换红外光谱仪光阑孔径及扫描速率设置探讨

傅里叶变换红外光谱仪辐射通量大,特别适用于测量弱信号光谱,从而具有很高的灵敏度.因此也对处理系统有着苛刻的要求,在实际测试中,博里叶光谱仪光阑孔径及扫描速率设置是相关联的,直接影响到采集及数据处理的精度.通过试验,研究探讨了傅里叶光谱仪光阑孔径及扫描速率设置极限及平衡点,兼顾快与准.     

微生物胞外聚合物对重金属镉的解毒作用及红外光谱分析

为探索微生物胞外物在微生物对重金属的抗性和去除过程中的作用,比较分析了对重金属镉具有不同抗性和去除率的菌株SCSE425-7和SCSE709-6胞外物的产生情况和菌株的红外光谱谱图。结果表明,在含镉条件培养时,菌株SCSE425-7表现了较高的镉抗性,分泌了相对较多的可溶性胞外多糖;而菌株SCSE709-6镉抗性较SCSE425-7低,但镉的生物去除性能较好,分泌了更多不可溶胞外聚合物。这说明,在重金属毒性胁迫下,微生物分泌的可溶性胞外多糖可能有助于提高微生物对重金属的抗性,而不可溶性胞外聚合物有助于重金属的微生物吸附。菌株红外光谱分析结果表明不可溶胞外聚合物上的酰胺基和羧基是其吸附镉离子的主要官能团。     

Mixed multi-region design of diffractive optical element for projection exposure system

The diffractive optical element (DOE) is widely used to generate various illumination modes in the projection lithography system. The working principle and design methods of the DOE are discussed in detail in this paper. A mixed multi-region design method is proposed to calculate the phase of DOE based on the poor spatial coherence of excimer laser, using the Gerchberg–Saxton (GS) algorithm. The DOEs generating circular, dipole and quadrupole illumination modes are designed and simulated by three different methods: single region design, repeated multi-region design and mixed multi-region design. The performance of these DOEs are compared and analyzed with these three design methods. The mixed multi-region design method is used to design the DOEs generating three illumination modes, the diffraction efficiencies are greater than 85%, and the non-uniformities of illumination are less than 3%. The analysis results indicate that the DOE designed by the mixed multi-region design can achieve higher diffraction efficiency and illumination uniformity of the far-field intensity distribution without modifying the GS algorithm.     

衰减全反射傅里叶变换红外光谱技术的临床应用研究进展

系统回顾了衰减全反射傅里叶变换红外光谱(attenuated total reflection Fourier transform infrared, ATR-FTIR)技术在临床医学领域中的应用研究进展。ATR-FTIR光谱技术具有实时、简单、无创扫描生物组织样品的优势,通过结合多模式识别统计学方法并对照临床及病理学诊断结果,可对生物组织样本进行判别分析。目前,对甲状腺、乳腺,以及肺组织等新鲜离体组织的光谱学检测中,ATR-FTIR技术可达到较高的判别敏感性、准确性与特异性;尤其在对甲状腺和乳腺疾病患者的前哨淋巴结活检的研究中,应用ATR-FTIR技术,可对良、恶性组织进行敏感性、准确性与特异性均较高的鉴别研究,对辅助临床诊断具有潜在的重要价值。此外,利用ATR-FTIR光谱技术对生物体液进行光谱分析并进一步诊断疾病的研究也在逐步开展。由于血清中所含成分的改变对于提示疾病状况具有重要价值,因而血清ATR-FTIR光谱学诊断方法成为研究热点,已有应用ATR-FTIR技术对脑胶质细胞瘤、心肌梗死、肾衰、阿尔茨海默病、卵巢癌与子宫内膜癌等多种疾病进行分析的研究报道。目前已可通过ATR-FTIR技术对卵巢癌进行疾病分期的判别诊断,该技术有望成为卵巢癌筛查的重要方法。由于血清ATR-FTIR光谱学技术具有检测快速、判别准确、性价比高等优势,有望成为今后生物医学发展的重要方向之一。