基于哈特曼-夏克波前测量原理的焦距测量

本文从哈特曼-夏克波前测量原理出发,提出了基于波前测量的透镜焦距测量方法|得到了使用这一方法测量焦距的计算公式.使用633 nm和780 nm两种波长的半导体准直激光器作为光源,测量了三片双合透镜的焦距,结果表明,633 nm光源下测量得到的波长与透镜的设计焦距值相吻合,能够正确测量透镜焦距|而780 nm光源的测量结果显示出较大的相对测量偏差,但可用于评估透镜的剩余球差、色差以及制造公差.     

基于变积分时间的红外焦平面非均匀性校正算法研究

针对两点温度定标算法在应用过程中曝露的问题,提出了基于变积分时间的红外焦平面非均匀性校正算法.该算法先对图像进行非线性压缩,转换为线性图像,再利用红外焦平面阵列探测元的响应特性与积分时间之间的关系,采用改变积分时间的方法拟合红外焦平面探测器的平均响应特性曲线,进行两点校正,然后对结果进行取指数操作,即得到原图非均匀校正后的图像.分别利用两点温度定标法和变积分法对航拍红外图像进行校正效果验证,同时进行了不同校正算法的非均匀性适应性评价实验.实验结果表明新算法计算量小,校正准确度高,反应速度快,并在一定程度上解决了大动态范围下响应非线性对校正性能的影响,具有很好的工程应用价值.     

Effect of annular apodization and pupil beam parameter in the focal region of high NA lens

Focusing properties of the radially polarized axisymmetric Bessel-modulated Gaussian beam with quadratic radial dependence (QBG beam) and annular aperture are investigated theoretically by vector diffraction theory. Simulation results show that the intensity distribution in the focal region of the radially polarized axisymmetric QBG beam can be adjusted considerably by small beam parameter (μ) and annular aperture (δ). When μ increases, the focal spot may change to focal hole and changes focal pattern remarkably. On introducing annular aperture, focus can split or extends along the optical axis for different μ. In this paper, we have shown the generation of the focal spot, dark focal spot, focal split and increase in focal depth in the axial direction of the incident beam propagating through the aligned optical system.     

A two-frame approach for scene-based nonuniformity correction in array sensors

This paper introduces a new scene-based technique to correct the fixed-pattern noise (FPN) in array sensors. This method registers a pair of image frames exhibiting small relative scene translation and then the noise pattern can be reconstructed using the constrained least-squares estimation. The key advantage of this technique is that the accurate estimates of the bias nonuniformity can be obtained with only two images, without imposing any assumptions on the structure of the FPN. Besides, the method works on almost static scene, and therefore does not require larger scale global motion and statistical assumptions on the scene irradiance. We test our method on synthetically generated FPN as well as with real infrared data, and experimental results demonstrate the significant reduction in FPN, validating the effectiveness of our approach. Finally, we validate the feasibility and validity of using the proposed method as a first step fostering the success of more sophisticated registration-based time-evolving correction algorithms.     

物理量单位的智能导出算法及其应用

推导物理量的单位是物理作业中不可缺少的重要环节。提出一种物理量单位的智能导出算法,即计算机根据物理量的运算式自动推导出待求物理量的单位。实验结果表明,物理量单位导出及换算算法的结果正确,对算术运算式中的物理量单位导出及换算的正确率为100%,且物理量数值的运算正确。     

Focal nodular hyperplasia of the liver: diffusion and perfusion MRI characteristics

Purpose

To present diffusion and perfusion magnetic resonance imaging (MRI) characteristics of focal nodular hyperplasia (FNH) of the liver.

Materials and Methods

Thirty-five patients with 52 FNHs (21 were pathologically-confirmed) underwent MRI at 1.5-T device. MR diffusion [diffusion-weighted imaging (DWI)] was performed using a free-breathing single-shot, spin-echo, echo-planar sequence with b gradient factor value of 500 s/mm². MR perfusion [perfusion-weighted imaging (PWI)] consisted of a 3D free-breathing LAVA sequence repeated up to 5 minutes after injection of 7 mL Gd-BOPTA (MultiHance, Bracco, Italy) and 20 mL saline flush at a flow rate of 4 mL/s. Apparent diffusion coefficient (ADC) and time-signal intensity curve (TSIC) were obtained for both normal liver and each FNH by two reviewers in conference; maximum enhancement (ME) percentage, time to peak enhancement (TTP), and maximal slope (MS) were also calculated.

Results

On DWI mean ADC value was 1.624×10^− 3 mm²/s for normal liver and 1.629×10^− 3 mm²/s for FNH. ADC value for each FNH and the normal liver was not statistically different (P= .936). On PWI, TSIC-Type 1 (quick and marked enhancement and quick decay followed by slowly decaying) was observed in all 52 FNHs, and TSIC-Type 2 (fast enhancement followed by slowly decaying plateau) in all normal livers. The mean ME, TTP and MS values were significantly different for FNH and normal liver (P= .005).

Conclusion

FNHs of the liver showed typical diffusion and perfusion MRI characteristics in all cases. On the ADC map, we could get similar value between the FNHs and the background parenchyma. On the perfusion imaging, FNHs showed a different pattern distinguished from the background liver.     

一维减幅-增幅谐振子的守恒量与对称性

从一维减幅-增幅谐振子的运动微分方程出发得到系统的运动积分常数,从而得到系统的Lagrange函数和Hamilton函数,再根据Hamilton函数的形式假定守恒量的形式,由Poisson括号的性质得到了系统的三个守恒量,并讨论与三个守恒量相应的无限小变换的Noether对称性与Lie对称性.还对守恒量与对称性的物理意义作了合理的解释. 关键词： 一维减幅-增幅谐振子 守恒量 Noether对称性 Lie对称性     

Third order nonlinear optical characterization using focal shift measurements

We report on third order optical nonlinear experimental characterization using Z-scan method through focal shift measurements of a converging lens. The sample is fixed in front of a lens and is illuminated by a collimated beam. The shift of the geometrical focus in the nonlinear regime using input Gaussian beams is related to the nonlinear induced dephasing owing to a simple linear relation. Numerical calculations based on the Helmholtz wave equation are performed. Good agreement is obtained between experimental and theoretical results.     

Fabrication of type-II InAs/GaSb superlattice long-wavelength infrared focal plane arrays

In this paper, we present an InAs/GaSb type-II superlattice (SL) with the M-structure for the fabrication of a long-wavelength (10 μm range) infrared (LWIR) focal plane arrays (FPA), which are grown by molecular beam epitaxy (MBE). The M-structure is named for the shape of the band alignment while the AlSb layer is inserted into the GaSb layer of InAs/GaSb SL. A 320 × 256 LWIR FPA has been fabricated with low surface leakage and high R₀A product of FPA pixels by using anodic sulfide and SiO₂ physical passivation. Experiment results show that the devices passivated with anodic sulfide obviously have higher R₀A than the un-sulphurized one. The 50% cutoff wavelength of the LWIR FPA is 9.1 μm, and the R₀A is 224 Ω cm² with the average detectivity of 2.3 × 10¹⁰ cm Hz^1/2 W⁻¹.