Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

流动注射—在线分离富集与原子光谱检测联用技术

现代分析化学发展的重要特征之一是分析方法从离线/手动操作向在线/自动操作方向转化。流动注射(FI)作为非均匀和非平衡状态下的溶液处理和微量进样技术,是实现上述转化的有力工具。FI可与不同的分离富集和检测手段结合,具有很强适应性和实用性。在众多联用技术中,FI—在线分离富集与原子光谱检测联用技术特别受到分析化学界的青睐。这种联用不仅可以克服常规离线操作费时、污染环境和试样/试剂消耗大的缺点,而且可大大提高分析效率,显著改善分析方法的灵敏度与选择性,进行多种成分同时检测(对ICP—AES,DCP—AES     

J-aggregation and its characterization in Langmuir-Blodgett films of merocyanine dyes

Langmuir-Blodgett (LB) films are constructed by successively transferring monomolecular layers formed at the air-water interface onto solid substrates. One of the advantages of the LB technique in fabricating molecular aggregates lies in the fact that it can employ various kinds of molecules by mixing them at the air-water interface. The mixed system may exhibit new properties that are not observed for individual components. This method would be useful, for example, in the studies of the formation and control of the J-aggregates of functional dyes that attract attention both in science and technology. In this paper, I review this subject mainly based on our recent results in merocyanines. LB films of merocyanine dyes, mixed with arachidic acid (C(20)), exhibit J-aggregate formation and have been serving as typical systems in revealing the physical and structural aspects of nanosized molecular aggregates constructed as monolayers. In the case of LB films of a merocyanine dye having benzothiazole as donor nucleus (abbreviated as DS), electron spin resonance (ESR) spectroscopy has been successful in determining the characteristic in-plane orientation of dye molecules with respect to the dipping direction, which led to the discovery of the flow orientation effect during the dipping process of LB films as the origin of optical dichroism often observed in LB films. In this article, after an introduction of ESR spectroscopy, three major topics on the merocyanine J-aggregation and its characterization in mixed films are discussed. The first topic is the observation and control of the size of J-aggregates in the dilution limit of dyes in arachidic acid matrix for a methyl-substituted DS (6-Me-DS). Dependence of atomic force microscopy (AFM) patterns on the molar ratio allows the identification of dye domains. J-band optical peak analysis based on the Kuhn's extended dipole model, supplemented by a novel application of femtosecond pump-probe optical spectroscopy, yields the size of the J-aggregates of 10(3). The second topic is the control of the J-band peak wavelengths by mixing two different kinds of dye molecules. The first case is the mixture of a J-forming 6-Me-DS and non-J-forming merocyanine analog, DO with benzo-oxazole instead of benzothiazole of DS. The second case is the mixture of both J-forming dyes but with different J-band peak positions, 6-Me-DS and another analog of 5-Cl-DS. The optical peak shifts depending on the molar mixing ratio will be presented. The last topic is related to the elucidation of electronic states of dye molecules in the J-aggregates. Light-induced ESR (LESR) of DS films with stable isotope ((15)N or (13)C)-substituted dyes provide clear evidence for the photoinduced charge transfer by the detection of hyperfine structures. Moreover, infrared (IR) spectroscopy of (13)C-enriched dye identifies the IR absorption peak of the relevant carbon in the chromophore. The results give evidence for the enhanced intramolecular charge transfer of dyes in the J-aggregates compared with an isolated merocyanine composed of donor and acceptor moiety. Lastly, the Cl attachment in 5-Cl-DS leads to a significant enhancement of the nitrogen hyperfine coupling in the LESR spectra. These examples and others demonstrate the potential of LB films of merocyanines in the studies of the nanosized molecular aggregates in monolayer assemblies.     

Automatic flow procedure for the determination of glycerol in wine using enzymatic reaction and spectrophotometry

An automatic flow procedure for the determination of glycerol in wines by employing a flow system based on multicommutation and enzymatic reaction is described. Glycerol dehydrogenase was immobilized on aminopropyl glass beads and packed into a column that was coupled to the flow system. The NADH produced by the enzymatic reaction was monitored by spectrophotometry at 340 nm and its radiation absorption presented a relationship with glycerol concentration. The system manifold comprised a set of three-way solenoid valves controlled by a microcomputer, which was furnished with electronic interfaces and runs a software that was designed to carry out on-line sample dilution, reagent addition, and data acquisition. The procedure allows the determination of glycerol in wine samples without any prior pretreatment. The procedure presented as profitable features a linear response range between 2.0 and 10.0 g l⁻¹ glycerol (R=0.998), a detection limit of 0.006 g l⁻¹ glycerol, a relative standard deviation of 1.8% (n=14) for a typical wine sample presenting 5.3 g l⁻¹ glycerol, a sampling throughput of 33 determinations per hour, and a NAD⁺ consumption of 0.8 mg per determination. The results were compared with those obtained using a reference method and no significant difference at 90% confidence level was observed.     

On-line photo-derivatization with flow injection and liquid chromatography-atmospheric pressure electrospray mass spectrometry for the identification of indoles

The application of on-line photochemistry with flow injection (FI) and liquid chromatography (LC) in conjunction with atmospheric pressure electrospray mass spectrometry (LC-APESI-MS) for the identification of similar indole derivatives is reported here. The photo-transformation of the indole compounds is strongly affected by the substituent groups on the aromatic and heterocyclic rings. Upon photolysis for 2.5 min, the mass spectrum of tryptamine (Try) which has no OH substituent on the aromatic ring does not differ greatly from that obtained without photolysis. However, after photolysis of serotonin (Ser) which has one OH group on C5 of the aromatic ring, the mass spectrum indicates the formation of dimers and higher molecular weight ions. The fragmentation pattern of 5-hydroxytryptophol (Phol) without photolysis resembles that of Ser with a base peak of m/z 160. Upon photolysis using MeOH-H₂O (10/90), Phol is found to form a base peak at m/z 375 (100%) and a major peak at m/z 214 (66%) in addition to other ions with lower abundance. Melatonin (Mel) and tryptophan (Phan) upon photolysis are found to form high molecular weight ions with a relative low abundance. The mass spectrum of indole-3-acetic acid (Inaa) with on-line photolysis also shows different ions that are not formed without photolysis.     

Complexity of flow time minimization in a crossdock truck scheduling problem with asymmetric handover relations

We address a novel truck scheduling problem arising in crossdocking logistics, in which inbound trucks carry items (pallets) which must be sorted and loaded onto outbound trucks. We minimize the utilisation of the warehouse by focusing on the synchronisation between the different related trucks. The problem is to assign the trucks to the doors of the warehouse and sequence them, in order to minimize the total time spent in the system by the pallets. We discuss the complexity of the problem, showing that even with a single door the problem is NP-hard in general, and discuss some special cases.     

Flow injection analysis of potassium using an all-solid-state potassium-selective electrode as a detector

The concentration of potassium was determined by a combination of flow injection analysis (FIA) with an all-solid-state potassium sensor detection. The all-solid-state potassium-selective electrode possessing long-term potential stability was fabricated by coating an electroactive polypyrrole/poly(4-styrenesulfonate) film electrode with a plasticized poly(vinyl chloride) membrane containing valinomycin. The simple FIA system developed in this laboratory demonstrated sensitivity identical to that in the batch system and achieved considerably rapid assay (150 samples h⁻¹). Analyses of soy sauce and control serum samples by this FIA system yielded results in good agreement with those obtained by conventional measurements.     

Flow injection manifolds for liquid-liquid extraction without phase separation assisted by ultrasound

Flow injection (FI) manifolds based on iterative change of the flow direction have been designed to study the influence of auxiliary energy on continuous liquid-liquid extraction without phase separation and compare it with the non-assisted process in a single experiment. In order to demonstrate the utility of ultrasounds as auxiliary energy for the extraction of polyphenols from an organic phase, the approach has been applied to samples of extra virgin olive oil, using an alkaline aqueous phase as extractant and subsequent derivatization with the Folin-Ciocalteu reagent. The proposed method provides results similar to those from the official method-recoveries between 97 and 100%. The sensitivity of the proposed method is 3.5 times higher than that of the non-ultrasound-assisted method. The precision, expressed as relative standard deviation (R.S.D.) for n=5, was within 1-5% and the relative errors for the irradiated and non-irradiated method were within 3 and 5%, respectively. The repeatability and within-laboratory reproducibility, studied at two concentration levels (379 and 813 μg ml⁻¹) ranged between 0.7-4.4% and 0.6-4.8%, respectively. The proposed manifolds can also be applied to either other type of auxiliary energies—microwave, thermal—or two different types of auxiliary energies at the same time.     

High throughput continuous titration based on a flow ratiometry controlled with feedback-based variable triangular waves and subsequent fixed triangular waves

We propose a new approach for high-throughput continuous titration based on a flow ratiometry. The method was applied to potentiometric titrations of acids and bases. A base solution, the flow rate F_B of which was varied in response to controller output voltage V_c, was merged with an acid solution under constant total (acid + base) flow rate. Downstream, the pH of the mixed solution was measured with a flow-through glass electrode. Initially, V_c, and thus F_B was increased linearly. At the instant the equivalence point (EP) was sensed, the ramp direction of V_c was reversed from upward to downward. The direction was reversed to upward when EP was sensed again. Such the feedback-based operation gives a triangular waveform of V_c, because there is a delay corresponding mainly to the transit time of merged solutions to reach the sensor. The value of V_c that gives EP composition, V_E, was estimated by averaging the most recent maximum and minimum values of V_c. Next, fixed triangular waves of V_c was used to control F_B. The amplitude and the scan rate of the waves were fixed narrower and faster, respectively, than those in the feedback-based operation in order to improve the throughput rate. The EP can be located as long as the scan range covers V_E. These automated processes limited the titration to just the narrow range around EP, and thus realized extremely high throughput rate of maximally 17.6 titrations per minute (=3.4 s per titration) at R.S.D. = 0.35%.     

Determination of trace elements in human serum by inductively coupled plasma atomic emission spectrometry with flow injection

An analytical method for the simultaneous determination of some trace elements (Au, Fe, Mg, Li, Sr, Zn) in human serum by inductively coupled plasma atomic emission spectrometry (ICP-AES) with flow injection is described. Physical interference caused by the change of sample viscosity is discussed. When 100 μl of serum was injected, the relevant recoveries of > 99% for Li, > 98% for Cu and Mg, > 95% for Fe were obtained for an NIST SRM with R.S.D. > 1.3% using optimized flow injection parameters. The prepared lyophilized control serum for routine analysis in clinical laboratories was analyzed and verified for the validity of the technique employed in this experiment using NIST SRM 909 as a primary reference material.