An integrated approach for scheduling health care activities in a hospital

To effectively utilise hospital beds, operating rooms (OR) and other treatment spaces, it is necessary to precisely plan patient admissions and treatments in advance. As patient treatment and recovery times are unequal and uncertain, this is not easy. In response, a sophisticated flexible job-shop scheduling (FJSS) model is introduced, whereby patients, beds, hospital wards and health care activities are respectively treated as jobs, single machines, parallel machines and operations. Our approach is novel because an entire hospital is describable and schedulable in one integrated approach. The scheduling model can be used to recompute timings after deviations, delays, postponements and cancellations. It also includes advanced conditions such as activity and machine setup times, transfer times between activities, blocking limitations and no wait conditions, timing and occupancy restrictions, buffering for robustness, fixed activities and sequences, release times and strict deadlines. To solve the FJSS problem, constructive algorithms and hybrid meta-heuristics have been developed. Our numerical testing shows that the proposed solution techniques are capable of solving problems of real world size. This outcome further highlights the value of the scheduling model and its potential for integration into actual hospital information systems.     

空间站快速充电事件的机理研究

空间站等大型航天器由于采用高压太阳电池阵而引发的 带电问题成为近年来航天器带电研究领域的热点问题. 近年来观测到国际空间站(ISS)在出地影瞬间产生的"快速带电"事件 (也称"异常带电") , 再度引起了对低轨道航天器充电效应的深入研究. "快速带电"事件的特征为, 集中出现在出地影的瞬间, 在几秒内快速上升到较高电位(30—70 V), 然后在几十秒时间内缓慢衰降, 相对高压电池阵本身引起的结构体带电(称为"正常带电", 一般在30 V以下)严重得多. 目前国际上对"快速带电"的研究尚不充分. 本文在Furguson等人机理研究工作的基础上, 首次建立了描述"快速带电"事件的物理模型, 定量揭示了其充电过程的主要机理. 根据该模型对国际空间站的"快速带电"进行计算, 结果与观测到的典型充电脉冲符合, 模型预测的快速带电事件的统计规律也与观测结果基本一致. 关键词： 表面充电 等离子体 空间站 高压太阳电池阵     

Electrochromic Variation of the Infrared Emissivity in Tungsten Oxide Compounds

The so-called plastic technology first developed for the Li-based batteries leads to a new flexible infrared modulator. Orthorhombic monohydrated tungsten oxide (o-WO³ · H₂O) is used as the active insertion element in the LiCoO₂/o-WO³ · H₂O system. To prevent its degradation under air moisture, the device is protected with hermetic plastic and a window. Measurements of the reflectivity values indicate a very good contrast between the bleached and colored states for the first insertion (about 50% contrast in the 2.5–15 μm range), but the contrast between the inserted and de-inserted states is only about 30%. Optical properties follow quite well Drude mechanism.     

Evaluation of mathematical models for flexible job-shop scheduling problems

With the rapid development in computer technologies, mathematical programming-based technique to solve scheduling problems is significantly receiving attention from researchers. Although, it is not efficient solution method due to the NP-hard structure of these problems, mathematical programming formulation is the first step to develop an effective heuristic. Numerous comparative studies for variety scheduling problems have appeared over the years. But in our search in literature there is not an entirely review for mathematical formulations of flexible job shop scheduling problems (FJSP). In this paper, four the most widely used formulations of the FJSP are compiled from literature and a time-indexed model for FJSP is proposed. These formulations are evaluated under three categories that are distinguished by the type of binary variable that they rely on for using of sequencing operations on machines. All five formulations compared and results are presented.     

Flexible antenna design on PDMS substrate for implantable bioelectronics applications

In the current field of biomedical engineering, the research on implanted antennas has attracted more and more attention. This paper presents a flexible terrestrial radiating antenna with circular polarization characteristics that satisfy various requirements for biomedical implantable antennas. The new type of flexible material is adopted and a novel model is proposed. The square ground with small gap is implemented in the proposed antenna. The passive components can match the impedance and meet the requirements of the circular polarization wave. Simulation is carried out in a single layer tissue model to estimate the performance of the antenna and compared with multilayer tissue model. In addition, the flexible circularly polarized antenna has low profile characteristics and a wide axial ratio bandwidth of 250 MHz, ranging from 2.28 to 2.53 GHz. This paper uses pork to simulate single‐layer and multi‐layer tissue model. The flexible circular polarized antenna prototype is placed in the organization model for performance simulation test, and the measurement impedance bandwidth of 500 MHz is realized in the industrial scientific medical frequency band of 2.4–2.48 GHz.     

碳纳米管薄膜的制备及其在柔性电子器件中的应用

近年来,柔性电子器件的发展日新月异。以碳纳米管为代表的碳纳米材料,尤其是其组装成的宏观结构碳纳米管薄膜具有良好的柔性和优异的导电性,且具有化学稳定、热稳定、光学透明性等优点,在柔性电子领域展现了极大的应用潜力。本文简要综述了近年来碳纳米管薄膜在柔性电子器件领域的研究进展。首先详细介绍了碳纳米管薄膜的两类主要制备方法,分别为干法制备和湿法制备;继而介绍了碳纳米管薄膜在多种柔性电子器件的组装、性能与应用方面的最新研究进展;最后总结了碳纳米管薄膜基柔性电子领域的发展现状,并讨论了该领域所面临的挑战及其未来前景。     

Flexible integration of optical switch with optical power splitting and attenuating functions for optical fiber-based networking applications

A flexible integration of optical switch with optical power splitting and attenuating functions has been proposed to optimally serve optical fiber-based networking applications. In this switch, an etched binary-slope sidewall reflector is electrostatically actuated in and out of the plane to manipulate optical signals between input and output optical fibers. The fabrication process is a simple combination of a bulk-silicon micromachining process and silicon-to-glass anodic bonding where fiber alignment grooves, reflectors and actuators are fabricated on the same silicon substrate. Ball-lensed fibers are assembled with the device to achieve high coupling efficiency. Performances of the fabricated devices are measured and discussed. The switching time is less than 9 ms at 31 V. The excess loss of the device is less than 3 dB and the controllable attenuation range is up to 38 dB at 139 V, respectively. Moreover, polarization-dependent loss is less than 0.7 dB in the whole attenuation and splitting range.     

In situ confinement of iron-based active sites within high porosity carbon frameworks with enhanced activity for rechargeable Zn–air battery

Non-noble bifunctional electrocatalysts with robust activity and stability toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are greatly significant but challenging for Zn-air batteries. Here, in situ confinement of FeN_x active sites in high porosity carbon framework (FeN_x/CMCC) derived from chelate of carboxymethylcellulose (CMC) and iron ions were synthesized. Particularly, construction of FeN_x within porous carbon framework accelerates the electron transfer and the sufficient utilization of active centers, and then expedites the reaction kinetics of ORR and OER. As expected, the optimized FeN_x/CMCC exhibits superior ORR activity with a larger half-wave potential of 0.869 V. The rechargeable Zn-air battery delivers a higher power density of 99.6 mW/cm² and a special capacity of 781.9 mA h/g_Zn at 10 mA/cm², together with excellent durability of over 335 h. Remarkably, the as-assembled solid-state battery exhibits a higher open circuit voltage (OCV) of 1.5 V, a special capacity of 709.7 mA h/g_Zn, as well as prolonged cycling stability (90 h). Moreover, the flexible solid-state battery displays negligible loss of electrochemical performance under various bending angles, illustrating its potential application in flexible electronic devices.     

Advances in stable and flexible perovskite solar cells

Roll-to-roll (R2R) production is an innovative approach and is fast becoming a very popular industrial method for high throughput and mass production of solar cells. Replacement of costly indium tin oxide (ITO), which conventionally has served as the transparent electrode would be a great approach for roll to roll production of flexible cost effective solar cells. Indium tin oxide (ITO) and fluorine-doped tin oxide (FTO) are brittle and ultimately limit the device flexibility. Perovskite solar cells (PSCs) have been the centre of photovoltaic research community during the recent years owing to its exceptional performance and economical prices. The best reported PSCs fabricated by employing mesoporous TiO₂ layers require elevated temperatures in the range of 400–500 °C which limits its applications to solely glass substrates. In such a scenario developing flexible PSCs technology can be considered a suitable and exciting arena from the application point of view, them being flexible, lightweight, portable, and easy to integrate over both small, large and curved surfaces.     

Experimental and numerical study of an aquaculture net cage with floater in waves and current

The mooring loads on an aquaculture net cage in current and waves are investigated by dedicated model tests and numerical simulations. The main purpose is to investigate which physical effects are dominant for mooring loads, and in this respect, to investigate the validity of different rational hydrodynamic load models. Also structural and numerical aspects are investigated. The model tests are performed to provide benchmark data, while the numerical model is used to study the effect and sensitivity of different load models and parameters.Compared to a realistic aquaculture plant, the total system is simplified to reduce the complexity. The system does, however, include all the four main components of an aquaculture plant: net cage, floater, sinker weights and moorings. The net cage is bottomless, flexible and circular. It is attached to a circular, elastic floater at the top and has 16 sinker weights at the bottom. The system is nearly linearly moored with four crow feet mooring lines.The loads are measured in the four mooring lines. A systematic variation of current only, wave only as well as combined current and wave conditions is carried out. The numerical simulation results are first benchmarked towards the experimental data. The mean loads in general dominate over the dynamic part of the loads in combined current and waves, and they significantly increase in long and steep waves, relative to current only. Next, a sensitivity study is carried out. A rigid floater significantly alters the loads in the mooring lines compared to a realistic, elastic floater. The theoretical model for the wave matters. The mooring loads are rather insensitive to a majority of the parameters and models, in particular: frequency dependent added mass of the floater and nonlinear restoring loads. It seems not to be necessary to represent the net cage with a very fine numerical mesh.