Effects of various factors of ultrasonic treatment on the extraction recovery of drugs from fish tissues

In the present research, a combined extraction method of ultrasound-assisted extraction (UAE) in conjunction with solid phase extraction (SPE) was applied to isolation and enrichment of selected drugs (metoprolol, ticlopidine, propranolol, carbamazepine, naproxen, acenocumarol, diclofenac, ibuprofen) from fish tissues. The extracted analytes were separated and determined by ultra-high performance liquid chromatography with UV detection (UHPLC–UV) technique. The selectivity of the developed UHPLC–UV method was confirmed by comparison with ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) analysis.The important parameters, such as composition of type and pH of extraction solvent, solid/liquid rate volume of extraction solvent and number of extraction cycles were studied. The ultrasonic parameters, such as time, power and temperature of the process were optimized by using a half-fraction factorial central composite design (CCD). The mixture of 10 mL of methanol and 7 mL of water (pH 2.2) (three times) was chosen for the extraction of selected drug from fish tissues. The results showed that the highest recoveries of analytes were obtained with an extraction temperature of 40 °C, ultrasonic power of 300 W, extraction time of 30 min.Under the optimal conditions, the linearity of method was 0.12–5.00 μg/g. The determination coefficients (R²) were from 0.979 to 0.998. The limits of detection (LODs) and limits of quantification (LOQs) for the extracted compounds were 0.04–0.17 μg/g and 0.12–0.50 μg/g, respectively. The recoveries were between 85.5% and 115.8%.     

Suitability of selective pressurized liquid extraction combined with gas chromatography-ion-trap tandem mass spectrometry for the analysis of polybrominated diphenyl ethers

A one-step extraction and clean-up method using pressurized liquid extraction (PLE) (selective PLE) combined with gas chromatography-ion-trap tandem mass spectrometry (GC-ITMS-MS) was evaluated for the analysis of polybrominated diphenyl ethers (from tri- to hepta-PBDEs) at low concentrations in fish and shellfish samples. To this end, the performance of an on-line PLE extraction/clean-up method and of a classical Soxhlet extraction and clean-up method using a multi-layer modified silica column were compared. The two sample treatment methods provided similar results, although an important reduction in the sample treatment time (40 min per sample) was achieved using the selective PLE method. In addition, the suitability of the PLE combined with GC-ITMS-MS method was evaluated by comparing the results obtained in the analysis of fish samples with those obtained by gas chromatography-high resolution mass spectrometry (GC-HRMS). Good agreement between both techniques was obtained with differences between the mean values of less than 16%. The selective PLE method coupled to GC-ITMS-MS produced accurate results for PBDE determination with low limits of detection (1.0-16.8 pg g⁻¹ wet weight) and quantification (3.1-51 pg g⁻¹ wet weight) as well as good precision (RSD < 16%). This method has been applied to the analysis of PBDEs in fish and shellfish samples collected at fish markets in Catalonia (NE Spain).     

Robust microwave-assisted extraction protocol for determination of total mercury and methylmercury in fish tissues

A rapid and efficient closed vessel microwave-assisted extraction (MAE) method based on acidic leaching was developed and optimized for the extraction of total mercury (Hg), inorganic mercury (Hg²⁺) and methylmercury (CH₃Hg⁺) from fish tissues. The quantitative extraction of total Hg and mercury species from biological samples was achieved by using 5 mol L⁻¹ HCl and 0.25 mol L⁻¹ NaCl during 10 min at 60 °C. Total Hg content was determined using inductively coupled plasma mass spectrometry (ICP-MS). Mercury species were measured by liquid chromatography hyphenated with inductively coupled plasma mass spectrometry (LC-ICP-MS). The method was validated using biological certified reference materials ERM-CE464, DOLT-3, and NIST SRM-1946. The analytical results were in good agreement with the certified reference values of total Hg and CH₃Hg⁺ at a 95% confidence level. Further, accuracy validation using speciated isotope-dilution mass spectrometry (SIDMS, as described in the EPA Method 6800) was carried out. SIDMS was also applied to study and correct for unwanted species transformation reactions during and/or after sample preparation steps. For the studied reference materials, no statistically significant transformation between mercury species was observed during the extraction and determination procedures. The proposed method was successfully applied to fish tissues with good agreement between SIDMS results and external calibration (EC) results. Interspecies transformations in fish tissues were slightly higher than certified reference materials due to differences in matrix composition. Depending on the type of fish tissue, up to 10.24% of Hg²⁺ was methylated and up to 1.75% of CH₃Hg⁺ was demethylated to Hg²⁺.     

Biosensor system for continuous glucose monitoring in fish

A biosensor system was developed for continuous estimation of blood glucose in fish. Because it is difficult to measure blood components in real-time due to decreased sensor output resulting from blood coagulation and coalescing blood proteins at the sensor placement site, we used the eyeball scleral interstitial fluid (EISF) as the site of sensor implantation. Evaluation of the relationship between EISF and blood glucose concentrations revealed that the blood glucose concentration correlated closely with the EISF glucose concentration (y = 2.2996 + 0.9438x, R = 0.960, n = 112). To take advantage of the close correlation between blood and EISF glucose, we prepared a needle-type enzyme sensor for implantation in the fish sclera using a flexible wire electrode. The sensor provided a rapid response, good linearity, and reproducibility. Continuous glucose monitoring could be carried out by implanting this needle-type glucose sensor onto the eye. The findings indicated that the glucose concentration increased with sensor output current over time, and that changes in the blood glucose were continuously reflected in the EISF. The glucose concentration was estimated based on the one-point or two-point calibration methods. The two-point calibration method yielded the most accurate glucose monitoring (blood glucose range of 70-420 mg dL⁻¹) over 160 min. Sensor-estimated glucose and whole blood glucose values were highly correlated (y = 0.4401 + 0.8656x, R = 0.958).     

Quantitation and identity confirmation of residues of quinolones in tilapia fillets by LC-ESI-MS-MS QToF

A method for simultaneous determination of flumequine (FLM), oxolinic acid (OXO), sarafloxacin (SAR), danofloxacin (DAN), enrofloxacin (ENR), and ciprofloxacin (CIP) in tilapia (Orechromis niloticus) fillets, using liquid chromatography-tandem mass spectrometry (LC-ESI-MS-MS QToF) is presented. The quinolones were extracted from the food matrix with a solution of 10% trichloroacetic acid-methanol (80:20 v/v) with ultrasonic assistance. Clean-up of the extract solution was performed by using polymeric solid-phase extraction cartridges. The LC separation was carried out on an octadecyl hybrid silica column (C₁₈, 150 mm × 3 mm, 5 μm). The column temperature was set at 30 °C, and gradient elution (0.2 mL min⁻¹) was performed using water and acetonitrile, both containing 0.1% of acetic acid, as mobile phase components. The analytes were ionized using electrospray in the positive polarity mode. The following analytical results were obtained: linearity was about 0.99 for all the quinolones; intra and inter-assay precision (RSD%) were lower than 12.7 and 20%, respectively; and recoveries were from 89 to 112%. The quantitation limits were below the maximum residue limits established for the analytes. The method is suitable for the determination of quinolone residues in fish fillets and the QToF technique made it possible to obtain m/z ratios with less than 10 ppm of error for each analyte.     

Toxaphene analysis in Great Lakes fish: a comparison of GC-EI/MS/MS and GC-ECNI-MS, individual congener standard and technical mixture for quantification of toxaphene

Toxaphene is considered to be a problematic organochlorine pollutant because of its bioaccumulation potential and persistence in aquatic environments. In this study, whole lake trout and walleye composites were used to evaluate two analytical techniques for total toxaphene and selected congener analysis. The efficacy of using gas chromatography electron ionization tandem mass spectrometry (GC-EI/MS/MS) and electron capture negative ionization mass spectrometry (GC-ECNI-MS) were compared. Although the sensitivity using GC-ECNI-MS was approximately five times greater than GC-EI/MS/MS, the latter provided more consistent inter-Parlar relative response factors (RRF). When using technical calibration mixtures, these results suggest a more accurate total toxaphene measurement was obtained using the GC-EI/MS/MS method. Total toxaphene concentrations in lake trout composites from both methods were highly correlated (R ² = 0.985) with the MS/MS concentrations approximately half of those determined by ECNI, suggesting systematic high bias in toxaphene concentrations when measured using GC-ECNI.     

Seafood freshness determination through vapour phase Fourier transform infrared spectroscopy

A new vapour-phase manifold has been developed to determine trimethylamine (TMA) in fish and cephalopod samples by Fourier transform infrared (FT-IR) spectroscopy. Samples were treated off-line for 1 h with trichloroacetic acid (TCA), filtered and washed. The obtained extracts were aspirated and alkalinized with NaOH 2.0 M, in an on-line system. TMA was separated from the solution in a gas phase separator and then transported by means of a nitrogen carrier into a home made 10 cm pathlength IR gas cell, where the corresponding FT-IR spectra were acquired by accumulating 30 scans per spectrum with 2 cm⁻¹ nominal resolution. The method was applied to the determination of TMA in natural samples providing concentration values statistically comparables with those obtained by a head space gas chromatography (HS-GC) reference procedure. The sample throughput by FT-IR is increased by a factor of 6 as compared with HS-GC.     

Supramolecular solvents in solid sample microextractions: Application to the determination of residues of oxolinic acid and flumequine in fish and shellfish

Supramolecular solvents are here proposed firstly as extractants in solid sample microextractions. The approach was evaluated by extracting flumequine (FLU) and oxolinic acid (OXO), two widely used veterinary medicines, from fish and shellfish muscle using a supramolecular solvent made up of decanoic acid (DeA) reverse micelles. The antibiotics were extracted in a single step (∼15 min), at room temperature, using 400 μL of solvent. After centrifugation, an aliquot of the extract was directly analyzed by liquid chromatography and fluorescence, without the need of clean-up or solvent evaporation. Contrary to the previously reported methods, both OXO and FLU were quantitatively extracted from fish and shellfish, independently of sample composition. The high extraction efficiencies observed for these antibiotics were a consequence of their amphiphilic character which resulted in the formation of DeA-OXO and DeA-FLU mixed aggregates. The quality parameters of this quantitative method including sensitivity, linearity, selectivity, repeatability, trueness, ruggedness, stability, decision limit and detection capability were evaluated according to the 2002/657/EC Commission Decision. Quantitation limits in the different samples analyzed (salmon, sea trout, sea bass, gilt-head bream, megrim and prawns) ranged between 6.5 and 22 μg kg⁻¹ for OXO and, 5 and 15 μg kg⁻¹ for FLU. These limits were far below the current maximum residue limits (MRLs) set by the European Union (EU) (i.e. 100 and 600 μg kg⁻¹, for OXO and FLU, respectively). The trueness of the method was determined by analyzing a Certified Reference Material (CMR, BCR^®-725) consisting of a lyophilised salmon tissue material. Recoveries for fortified samples (50–100 μg kg⁻¹ of OXO and 50–600 μg kg⁻¹ of FLU) and their relative standard deviations were in the intervals 99–102% and 0.2–5%, respectively. The repeatability, expressed as relative standard deviation, was 3.6% for OXO and 2.3% for FLU ([OXO] = [FLU] = 200 μg kg⁻¹ and n = 11).     

Assessment of amplitude modulation in environmental noise measurements

This paper introduces a method to assess the parameters of amplitude modulation as applicable to environmental noise monitoring tasks. It is based on the analysis of time histories of sound pressure levels correlated with a reference cosine signal. The method brings accurate results in situations where the time history does not exhibit a clear modulation pattern or the signal-to-noise ratio is poor. These features make the suggested technique attractive for practical implementation.     

Thermogravimetric and differential thermal analytical investigations on sewage farm soils

Soil substrates of sewage farms (inflow of sewage areas) and of closed sewage farms were investigated by means of thermogravimetry and differential thermal analysis. The results were compared with those obtained for control samples from outside the sewage farms.The organic matter of actively used sewage areas (inflow) contains a remarkable amount of easily oxidizable compounds brought to the inflows by suspended matter.Beside these compounds, macromolecular organic substances predominate in the composition of the organic matter and are responsible for an immense heat release in the high temperature range of the thermal studies.In the substrates of closed sewage farm inflows or of other sewage farm areas which do not belong to the inflows, the amounts of volatile and easily oxidizable compounds decrease rapidly. The substrates hardly differ in their reaction temperatures from control samples. The influence of single macromolecules on the exothermic oxidation is reduced with increasing humification.