Sample Injection for Capillary Electrophoresis on a Micro Fabricated Device/On Chip CE Injection

Abstract

Reproducible injection for capillary electrophoresis on a micro device/Lab on chip is not an easy task. Different injection designs (e.g., T‐type, double T‐type, cross) and different injection modes have been applied (pinched injection, gated injection, optically gated injection, pressure/pneumatic injection, double L injection) with various analytes. Problems and properties of the different modes are described.     

云蒸霞蔚——多色双喷泉实验

本实验在氨气和氯化氢气体的单喷泉实验基础上设计了集两种气体的制备、收集、验满、尾气处理、气体反应、喷泉实验与试剂回收利用于一体的连续性实验,喷泉部分涉及到的实验原理有氨气与硫酸铜溶液的配位反应、氨气与氯化钴溶液的沉淀反应、无色酚酞溶液和酸性对硝基苯酚溶液在碱性环境下的变色反应,以及氯化铁和硫氰化钾在弱酸性条件下的反应等。本实验的主要仪器装置由团队自行设计、定制,操作简便,玻璃活塞还可控制喷发顺序,实现多色多样喷泉,伴随氯化铵生成时的袅袅白烟,云蒸霞蔚,煞是壮观。另外,我们设计了多角度的互动方案,针对不同程度知识背景的受众传授知识,让参观者真切感受到化学的魅力。     

飞行时间质谱仪固体样品自动进样系统研制

以常规型飞行时间质谱仪为基础,通过配置移动平台、样品杆、工业相机、LED灯源、工业显示屏等部件,研制了一套飞行时间质谱仪用固体样品自动进样系统,实现了固体有机样品的直接进样分析。该装置具有一定的普适性,可为相关实验室设备升级改造提供借鉴和参考。该装置可进行难溶未知有机化合物的结构剖析,实现目标物的快速筛查,且操作人员可实时观测锥孔处样品状态并可软件操控进样位置,实现人机分离的自动化测试。     

金刚石衬底上GaN HEMT沟道温度建模:各向异性且非均匀热导率的影响

为了改善GaN HEMT的自热效应,集成高热导率的金刚石衬底有助于增强器件有源区的热量耗散。然而,化学气相淀积(CVD)生长的多晶金刚石(PCD)具有柱状晶粒结构,导致了各向异性的材料热导率,且其热导率值与生长厚度有关。为此,通过建模金刚石生长过程中晶粒尺寸的演变过程,计算了金刚石沿面内和截面方向的热导率。基于该PCD热导率模型,利用计入材料非线性热导率的GaN器件热阻解析模型,计算得到了GaN HEMT沟道温度的波动范围,并分析了其与器件结构(栅长、栅宽、栅间距、衬底厚度)和功耗的依赖关系。最后,通过与有限元(FEM)仿真结果对比,分区域提取了GaN HEMT器件中PCD衬底的有效热导率,分别为260~310 W/(m·K)和1 250~1 450 W/(m·K)。本文的计算为预测金刚石衬底上GaN HEMT器件的沟道温度提供了快速、有效的方法。     

天文观测相机低噪声CCD视频处理电路的分析与设计

在讨论天文观测相机低噪声视频处理电路的基础上,对前置放大、差分放大、可编程增益放大、相关双采样及16bit模数转换等关键组成部分进行了分析,给出各组成部分的设计方法。对所设计的低噪声视频处理电路进行了PSPICE仿真和实验测试,仿真和实验结果表明,该视频处理电路在本身引入噪声较小的同时,有效地抑制了CCD的复位噪声和1/f等低频噪声,使天文观测相机的整机噪声<15e-,达到了指标要求。     

激光指示器光轴调校技术

利用反射式光学系统对激光指示器的光轴进行了调校。提出了激光指示器及观瞄装置的光轴校正方案,并建立了调校装置。该装置由离轴抛物面反射镜、十字靶标、背景光源、图像采集装置及其它附件组成。对调校装置的测量精度进行了标定和计算。结果表明,该装置的测量精度可达到0.05mrad。利用该装置对激光指示器的光轴进行了调校,并给出了系统示意图和测试效果。     

一种微波加热装置的风冷散热研究

微波加热装置工作过程会散发大量的热量,如果不能及时排出,会造成输出功率的下降.本文以九个磁控管加热单元组成的微波加热装置为研究对象,首先提出一种风冷散热结构设计,接着通过Fluent热仿真软件验证结构设计的合理性,然后通过对比分析加热装置进风口位置、面积大小等因素对散热效果的影响,对散热结构进行改进,进一步提高了内部磁...     

一种基于MEMS技术的PDMS微型分流器的研制

本文采用三层光刻工艺制作了基于聚二甲基硅氧烷(Polydimethylsiloxane,PDMS)的V形微分流器。引入牺牲层技术,解决了不同胶层间的界面互融问题,讨论了不同胶层间显影液对图形质量的影响。所制得的分流器工艺简单,结构形貌良好,具有良好的微流控制作用,满足器件使用要求。     

Enhanced luminance of white organic light-emitting diode with yellow nanophosphors-embedded blue polymer emitting layer

White organic light-emitting device was achieved through an incorporation of yellow YAG nanophosphors into blue polyfluorene emitting layer: electrode/YAG@polyfluorene/hole-transport/injection layers/ITO glass. The brightness of the proposed device (230 cd/m² at 30 V) was enhanced by a factor of about two in comparison with that of phosphor-free reference device. It is attributed to the increased local electric field caused by bumps of nanophophors on the emitting layer. With increase of voltage, the blue-green emission decreased whereas the yellow emission increased. It is due to the effective energy transfer from the blue-green to the yellow bands.     

Synthesis,antibacterial evaluation and survey on the thermophysical characteristics of novel medically applicable polyamides containing pharmaceutically outstanding triazole moieties

There are many different strategies to decrease the incidence of infection of medical device and food related containers. One way to prevent infection is by modifying the polymers used in making the devices and containers. Incorporation of antimicrobial agents in the bulk material or in formulations of medical devices production has been considered a viable alternative for systemic application of antibiotics. In this article, preparation of a series of triazole containing polymers, poly(triazole-amide-imide)s (PTAI)s and poly(triazole-amide) (PTA)s, and their monomers are reported. These polymers were readily soluble in a variety of organic solvents, showed significant thermal properties and also viscosities in the range of 0.55–0.66 dL/g. They have been tested against a range of Gram-positive and Gram-negative pathogens. The results indicated that these novel polymers containing triazole moiety in their repeating units can effectively control Gram-positive and negative pathogens and their physic-chemical properties besides their antibacterial characteristics make them unique candidate for using in the manufacturing of the medical devices.