含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.     

Light Scattering by Cylindrical Fibers with High Aspect Ratio Using the Null‐Field Method with Discrete Sources

The problem of computing light scattering by cylindrical fibers with high aspect ratio in the framework of the Null‐Field method with discrete sources is treated. Numerical experiments for investigating the scattering properties of two fiber geometries are performed using distributed spherical vector wave functions as discrete sources.     

孤子掺杂光纤放大的半径典模型与分析

建立了孤子掺杂光纤放大的半经典模型，给出了分布放大透明传输的泵浦条件，详细讨论了激发态吸收的影响．文中结果为Ｅｒ￣３＋掺杂光纤孤子放大器的设计提供了重要理论依据．     

锥形光纤的偏振特性

随着光通信技术的不断发展，光纤的应用越来越广泛，而锥形光纤以其独特的传光方式越来越多地应用于光纤连接、成像及测量等领域。实验测定了不同锥角和不同长度锥形光纤的偏振特性。理论上，根据麦克斯韦方程组以及边界条件给出了光在理想光纤中的场分布，阐明了实际光纤中光的传输特性。论证了锥形光纤长度与其偏振特性的关系，进而利用几何光学方法对锥形光纤锥角与其偏振特性的关系作了定性说明。并用具体数据进行了定量计算，得出偏振光经锥形光纤传输或耦合后再传输到其终端所得到均是椭圆偏振光的结论。     

光双二进制传输系统的性能研究

光双二进制信号的谱宽是传统二进制信号的一半,采用双二进制传输比二进制传输色散限制的中继距离可增加一倍.本文对采用传统光接收机的光双二进制传输系统用MATLAB进行了通信仿真.结果表明:在完全消光条件下,10 Gb/s双二进制信号在常规单模光纤上传输可达160 km,40 Gb/s双二进制信号在非零色散光纤上为30 km,均比二进制增加了一倍;详细考察了消光比对传输的影响,只有消光比大于25 dB时,双二进制相对于二进制传输的优越性才呈现出来.     

光纤陀螺信号处理中SLD驱动电路设计

光纤陀螺用光源要求输出功率高、相干性低、稳定性好，超辐射发光二极管（SLD）是能满足这些要求的理想光源，目前国内光纤陀螺用的光源基本上主要选择超辐射发光二极管（SLD），从工程实际应用出发，介绍了超辐射发光二极管（SLD）驱动电路设计，以此来提高光纤陀螺性能。     

10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

磁光玻璃光纤的偏振特性及其在全光纤电流传感器中的应用

在磁光玻璃裸光纤偏振特性研究的基础上，研制磁光玻璃光纤，偏振特性及其在全光纤电流传感器中的应用。将采用模管法拉制成的磁光玻璃光纤置于亥姆霍兹线圈产生的磁场中，当线偏振光通过该光纤时，其偏振面旋转一定角度，把该角度转换成光信号的强度，然后再用仪器进行检测。通过对线偏振光偏振面在磁场中的偏振特性的测试与实验，提出用磁光玻璃光纤构成的全光纤电流传感器，可用于电流和磁场测试。