Bia-amperometric quantification of salbutamol in pharmaceutical products

This paper presents a simple, rapid and reproducible method of analysis of salbutamol in pharmaceutical products, utilizing batch injection analysis (BIA) associated with amperometric detection. A study of salbutamol oxidation demonstrated a strong dependence between electrode fouling and pH. All determinations were done utilizing a glassy carbon electrode in presence of 3.0 mol l⁻¹ NaOH. A large linear dynamic range from 8×10⁻⁷ to 2×10⁻⁴ mol l⁻¹ was obtained by using an injected volume of 100 μl with a detection limit of 2.5×10⁻⁷ mol l⁻¹. R.S.D. of 0.92% for 50 successive injections of 4×10⁻⁶ mol l⁻¹ of salbutamol and a sample throughput of 60 samples per hour were achieved. The method was applied for salbutamol quantification in syrups.     

On-probe pyrolysis desorption electrospray ionization (DESI) mass spectrometry for the analysis of non-volatile pyrolysis products

An on-probe pyrolyzer has been constructed and interfaced with desorption electrospray ionization (DESI) mass spectrometry (MS) for the rapid analysis of non-volatile pyrolysis products. The detection and analysis of non-volatile pyrolysis products of peptides, proteins and the synthetic polymer poly(ethylene glycol) were demonstrated with this instrument. The on-probe pyrolyzer can be operated off-line or on-line with the DESI source and was interfaced with a tandem MS (MS/MS) instrument, which allowed for structure characterization of the non-volatile pyrolytic products. Advantages of this system are its simplicity and speed of analysis since the pyrolysis is performed in situ on the DESI source probe and hence, it avoids extraction steps and/or the use of matrices (e.g., as in MALDI–MS analyses).     

Synthesis and structural revision of naturally occurring ayapin derivatives

The synthesis of three highly oxygenated naturally occurring coumarins, 8-methoxy-6,7-methylenedioxycoumarin, 5-methoxy-6,7-methylenedioxycoumarin and 5,8-dimethoxy-6,7-methylenedioxycoumarin is described for the first time, together with a new method for the preparation of ayapin (6,7-methylenedioxycoumarin). Comparison of the spectroscopic data of the synthetic tetraoxygenated coumarin 5,8-dimethoxy-6,7-methylenedioxycoumarin with literature reports resulted in the structural revision of several natural coumarins. Two coumarins, both identified as 5,8-dimethoxy-6,7-methylenedioxycoumarin must have other structures, while the structure of another coumarin, described as the isomeric 7,8-dimethoxy-5,6-methylenedioxycoumarin has to be revised to 5,8-dimethoxy-6,7-methylenedioxycoumarin.     

Quantitative determination of several mono- and oligosaccarides in food products by means of high-pressure liquid chromatography replacement of the toxic eluent 'acetonitrile/water' by a mixture of harmless solvents

Summary The toxic eluent mixture acetonitrile/water frequently used for separation of mono- and oligosaccarides is replaced by the harmless temary mixture acetone/ethyl acetate/water. By various techniques — degassing of the eluent, parallel connection of two columns and temperature control of the columns, of the eluate and RI-detector — the method is made suitable for the determination of lower saccharide concentrations than usual. Methods for rational preparation of samples — extraction of the saccarides, deionizing of the sample solution — are suggested. Based on examples, the efficiency of the method is demonstrated.     

Simultaneous screening and determination eight phthalates in plastic products for food use by sonication-assisted extraction/GC-MS methods

Studies on determination of eight kinds of phthalates, e.g. di-ethyl phthalate (DEP), di-propyl phthalate (DPP), di-isobutyl phthalate (DIBP), di-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-cyclohexyl phthalate (DCHP), di-(2-ethylhexyl) phthalate (DEHP), di-octyl phthalate (DOP), in 25 kinds of plastic products for food use, including packaging bags, packaging film, containers, boxes for microwave oven use, sucking tubes, spoons, cups, plates, etc. by gas chromatography in combination with mass spectrometry detector (GC-MS) in electronic ionisation mode (EI) with selected-ion monitoring (SIM) acquisition method (GC-MS (EI-SIM)) have been carried out. Methods have been developed for both qualitative and quantitative analysis of phthalates. Extraction, clean-up and analysis procedure have been optimized. Determination of samples were performed after frozen in liquid nitrogen and sonication-assisted extraction with hexane, clean-up with LC-C18 SPE and analyzed by GC-MS methods. The base peak (m/z = 149) of all the phthalates was selected for the screening studies. The characteristic ions, 121, 177, 222 for DEP; 191, 209 for DPP; 57, 223 for DIBP; 104 for DBP; 91, 132, 206 for BBP; 55, 167 for DCHP; 113, 167, 279 for DEHP; 279 for DOP were chosen for quantitative studies. These techniques are possible to detect phthalates at the level of 10.0 μg/kg. Overall recoveries were 82-106% with R.S.D. values at 3.8-10.2%. Only one of the 25 examined samples was free from phthalates. The rest 24 samples were found to contain at least three or more of these phthalates. The predominant phthalate detected in the studied samples was DEHP.     

Determination of iodide by detection of iodine using gas-diffusion flow injection and chemiluminescence

This work describes development of a flow injection (FI) system for determination of iodide, based on the chemiluminescence (CL) reaction between iodine and luminol. Iodide in the sample zone is oxidized to iodine. Employment of a gas-diffusion (GD) unit allows for selective detection of the generated CL (425 nm). Preliminary results showed for concentrations of less than 2 mg L⁻¹, that signals were irreproducible and that the calibration was not linear.In order to solve these problems, a method of ‘membrane conditioning’ was investigated, in which iodide stream was continuously merged with oxidant to generate I₂ that conditioned the GD membrane and tubing. This minimized surface interaction between the active surface and the I₂ generated from the samples, thus improving both precision and sensitivity. By employing membrane conditioning, it has been possible to reliably detect concentrations down to 0.1 mg L⁻¹.At the optimized condition, an excellent linear calibration (r² = 0.999) was obtained from 0.1 to 1.0 mg L⁻¹. The method was successfully applied to determine iodide in some pharmaceutical products such as potassium iodide tablets and a liquid patent medicine. However, for vitamin tablets, ascorbic acid was found to interfere seriously by causing a negative signal.     

Solid-phase ultraviolet absorbance spectrophotometric multisensor for the simultaneous determination of butylated hydroxytoluene and co-existing antioxidants

Continuous flow injection and UV spectrophotometric detection have been proposed for simultaneous determination of the two binary mixtures, butylated hydroxytoluene (BHT)/n-propyl gallate (n-PG) and butylated hydroxytoluene (BHT)/butylated hydroxyanisole (BHA), in food and cosmetics samples. The method is based on the different residence times of each antioxidant when the flow cell is packed to a height of 25 mm with silica C₁₈ using methanol-water 50:50% (v/v) as a carrier with a flow rate of 1.25 and 1.10 ml min⁻¹, respectively. The determination of each antioxidant is based on the measurement of its absorbance at its maximum wavelengths using a DAD detector at 30 and 180 s for the mixture n-PG-BHT and 90 and 220 s for BHA-BHT. Calibration graphs were linear over the range 10.0-300.0 μg ml⁻¹ for each antioxidant in both mixtures. The relative standard deviations were 2.5% for BHT and 2.0% for the co-existing antioxidant. Resolution of the n-PG-BHT mixture in ratios between 1:8 and 8:1 and the BHA-BHT mixture in ratios between 1:10 and 10:1 is possible. The method was applied to the determination of both antioxidants in fat foods and cosmetics samples with recoveries ranging between 101 and 105%.     

加速溶剂萃取同步净化-同位素内标-气相色谱-高分辨质谱测定水产品中32种多氯联苯

建立了加速溶剂萃取同步净化-同位素内标-气相色谱-高分辨质谱同时测定水产品中32种多氯联苯含量的方法。通过在加速溶剂萃取仪中加入2 g无水硫酸钠、1 g弗罗里硅土、50 g中性氧化铝作为吸附剂实现同步净化的效果，萃取溶剂为二氯甲烷-正己烷（1:1，v/v），萃取温度为100℃，循环2次。萃取结束后分别用0.5 mL浓硫酸净化两次，净化液浓缩定容后，采用气相色谱-高分辨质谱测定，同位素内标法定量。32种多氯联苯在0.1~20 μg/L范围内平均相对响应因子（RRF）的相对标准偏差（RSD）值（n=7）均小于15%，定量限（S/N=10）为0.3~1.9 ng/kg。在草鱼和海鲈鱼空白基质中做加标回收试验，添加水平为5、20和50 ng/kg，得到的平均回收率为71.9%~119.0%（n=6），RSD为3.5%~19.6%。该方法背景干扰低，灵敏度高，重现性好，回收率稳定，适用于水产品中多氯联苯的检测。     

Marine Metabolites and Metal Ion Chelation: The Facts and the Fantasies

The marine environment is a seemingly inexhaustible treasury of organisms whose secondary metabolites bear witness to the lavishness and inventiveness with which nature is able to manipulate molecular architecture. But to what purpose are these diverse and often grotesque compounds produced? This review is founded on the premise that some of them may be involved in the uptake and transport of metal ions present in the aquatic milieu. Many metabolites produced by terrestrial organisms are known to act as ionophores, but the case for similar behavior by their marine counterparts is far hazier. Notwithstanding the relative abundance of certain metal ions in the oceans, and of metabolite structures possessing features that should facilitate the chelation of metal ions, few attempts to establish a connection between these two phenomena have been reported. We have whittled down the voluminous literature of natural products derived from marine sources to expose a core of observations and speculations germane to our premise. These facts and fantasies are evaluated in this review. A mere handful of metal-containing complexes has actually been isolated; furthermore, attempts to prepare such complexes in vitro are rare, and spectroscopic evidence for metal–metabolite interactions, whether in vivo or in vitro, is not common. Only with the vanadium-sequestering tunichromes does a logical (but by no means complete) picture begin to emerge. In several other cases, the plausibility of metal chelation, though mooted by authors, remains unsupported by experimental evidence. However, continuing efforts to obtain structural, and particularly conformational, information on the metabolites by means of X-ray crystallography, nuclear magnetic resonance spectroscopy, and molecular mechanics calculations would seem to provide the key to a rational approach to this neglected topic. On the basis of recent studies dealing with such structural aspects, we present a selection of candidate compounds, some of which are the targets of our own synthetic attentions, whose potential for binding to metal cations merits further research.     

SARS-CoV protease inhibitors design using virtual screening method from natural products libraries

Two natural products databases, the marine natural products database (MNPD) and the traditional Chinese medicines database (TCMD), were used to find novel structures of potent SARS-CoV protease inhibitors through virtual screening. Before the procedure, the databases were filtered by Lipinski's ROF and Xu's extension rules. The results were analyzed by statistic methods to eliminate the bias in target-based database screening toward higher molecular weight compounds for enhancing the hit rate. Eighteen lead compounds were recommended by the screening procedure. They were useful for experimental scientists in prioritizing drug candidates and studying the interaction mechanism. The binding mechanism was also analyzed between the best screening compound and the SARS protein.