采用(meta)-GGA泛函对Ag(111)、Rh(111)和Ir(111)上乙烯吸附的理论研究

本文针对在多种催化反应的重要中间体乙烯,使用(meta)-GGA等级的包含PBE,BEEF-vdW,SCAN以及SCAN+rVV10在内的多种交换关联泛函,系统研究了在过渡金属表面(Ag,Rh和Ir)上乙烯吸附势能面对泛函的依赖关系. 研究发现,对于乙烯在贵金属Ag(111)上的吸附,除了PBE外,BEEF-vdW,SCAN以及SCAN+rVV10均能预测出物理吸附态的存在. 对于乙烯在Rh(111)面的吸附,SCAN和SCAN+rVV10预测在化学吸附位之前存在有物理吸附前驱态,而基于PBE和BEEF-vdW的势能面并没有发现前驱态的存在. 而对于乙烯在Ir(111)上的吸附,BEEF-vdW也能微弱地预测出化学吸附前驱态的存在. 研究结果表明,无论在哪一种金属表面上,四种泛函中SCAN+rVV10给出的吸附能最强,其次是SCAN,最后是PBE或者BEEF-vdW.     

平板折叠桌的设计模型

根据折叠桌的运动特征,选取折叠桌的四分之一为研究对象,建立任意角度下桌脚点的运动变化模型。考虑到产品稳固性、加工便利性和节约用材三方面对加工参数的影响,对折叠桌进行受力分析,得到多目标组合优化模型,用以确定出折叠桌的最优设计参数。针对用户提出的桌面形状要求,建立桌脚曲线的参数方程。作为模型推广,以椭圆状折叠桌为例,运用Matlab画出了桌脚边缘线在折叠过程中的动态变化示意图。同时,又深入研究Robert van Embricqs的滑动折叠桌,建立了新的桌脚曲线参数方程。最后,运用Matlab对多种形状折叠桌进行仿真,编写多目标优化算法,得出了最优加工参数,并进行了算法描述。     

Determination of phenolic compounds and authentication of PDO Lambrusco wines by HPLC-DAD and chemometric techniques

This work proposes a fast and simple method for detection and quantification of phenolic compounds in PDO Lambrusco wines using HPLC-DAD and chemometric techniques. Samples belonging to three different varieties of Lambrusco (Grasparossa, Salamino and Sorbara) were analyzed to provide a methodology appropriate for routine analysis. Given the high complexity of the sample and the coelution among chromatographic peaks, the use of chemometric techniques to extract the information of the individual eluting compounds was needed. Multivariate curve resolution-alternating least squares (MCR-ALS) allowed the resolution of the chromatographic peaks obtained and the use of this information for the quantification of the phenolic analytes in the presence of interferences. Use of multiset analysis and local rank/selectivity information was proven to be crucial for the correct resolution and quantification of compounds. The quantitative data provided by MCR-ALS about the phenolic targets and additional compounds present in the samples analyzed provided wine composition profiles, which were afterwards used to distinguish among wine varieties. Principal component analysis applied to the wine profiles allowed characterizing the wines according to their varieties.     

LABVIEW下冲击试验测试信号分析模块的设计

根据GJB冲击环境试验测试要求,介绍LABVIEW平台下两类典型冲击信号分析模块的设计方法,主要讲述利用多图层叠加编程技术实现GJB150.18-1986标准规定的半正弦波与后峰锯齿波动态套容差曲线分析模块的设计以及利用递归算法实现冲击响应谱分析模块的设计。其次,采用资源DLL封装技术对LABVIEW编程实现的冲击信号分析模块进行封装,在其他编程语言中调用DLL实现冲击信号分析模块在其他编程语言中的功能链接。实践表明,LABVIEW图形化编程技术可快速实现两类冲击信号分析模块的设计,将高速数据采集模块与冲击信号分析模块集成,可有效完成冲击试验测试与信号分析处理任务。     

Duplex dual-labeled fluorescence probe-based melting curve and endpoint genotyping assays for genotyping of rs2000999 and haptoglobin gene deletion

Haptoglobin (Hp) is a hemoglobin-binding serum glycoprotein. Some variations in the Hp gene (HP) or Hp-related gene (HPR), including a single-nucleotide polymorphism in intron 2 of HRP, rs2000999, and a complete deletion of the HP gene (HP^del), one of the rare variants of HP, have been reported to correlate with the serum cholesterol concentration as well as the serum Hp concentration. In this study, we developed a duplex dual-labeled fluorescence probe-based method to simultaneously determine the rs2000999 G > A polymorphism by melting curve genotyping and the zygosity of HP^del by endpoint genotyping. This method was then validated by using the genomic DNA from 94 Japanese subjects for whom genotypes of rs2000999 and HP^del zygosity had already been determined. The results obtained with this method were in perfect agreement with the previous ones. Thus, the present method enables us to estimate these two polymorphisms in relatively large-scale groups of subjects, especially in Asian populations where the HP^del is distributed.     

DOUBLESLICING: a non-iterative single profile multi-exponential curve resolution procedure. Application to time-domain NMR transverse relaxation data

A new non-iterative curve resolution technique for resolving single decay profiles is proposed. The new technique, called DoubleSlicing, is based on the Decra (Direct Exponential Curve Resolution Algorithm) principle. While the original Decra was designed to resolve several decay curves simultaneously and thus fitting common pure exponentials, DoubleSlicing can resolve single decay profiles by a simple double data transformation followed by an analytical and unique three-way decomposition. The new approach is successfully demonstrated on experimental NMR CPMG relaxation data, measured on combinations of unmixed paramagnetic CuSO(4) solutions. Decay signals of the water component were acquired following an innovative experimental design that ensured no interaction between the components present in each sample under observation. DoubleSlicing proved to be accurate in estimating relaxation times differing in one order of magnitude (range: 19.6-159.4ms). Its performance was comparable to discrete exponential fitting with the advantage of being much faster - in terms of computation time, DoubleSlicing outperformed exponential fitting by a factor of four.     

光生物节律因子计算模型的研究

通过实验测量额头温度拟合光生物节律因子-额温差曲线,对现有评价光生物效应作用大小的BioEq模型和CLA模型的计算结果进行分析比较.利用不同图片LCD屏幕的光谱计算节律因子,发现两种模型对于绿色波段的光抑制较强,而对红色波段的光则与实际不相符.通过对九种不同颜色的LED光源测试额头温度,比较模型计算结果与实际光生物效应的作用,发现光生物节律因子与生理体征变化线性递增,其中对BioEq模型的直线拟合相关度达到0.95.     

Sulfur removal from bauxite water slurry (BWS) electrolysis intensified by ultrasonic

Effects of ultrasonic on desulfurization ratio from bauxite water slurry (BWS) electrolysis in NaOH solution were examined under constant current. The results indicated that ultrasonic improved the desulfurization ratio at high temperatures because of the diffusion and transfer of oxygen gas in electrolyte. However, due to the increase in oxygen gas emission, ultrasonic could not improve the desulfurization ratio obviously at low temperatures. Additionally, the particle size of bauxite became fine in the presence of ultrasonic, indicating that the mass transfer of FeS₂ phase was improved. According to the polarization curves, the current density increased in the presence of ultrasonic, indicating that the mass transfer of liquid phase was improved. The apparent activation energy (AAE) of electrode reaction revealed that ultrasonic did not change the pathway of water electrolysis. However, ultrasonic changed the pathway of BWS electrolysis, converting indirect oxidation into direct oxidation. The AAE of BWS electrolysis in the presence of ultrasonic was higher than that in the absence of ultrasonic. And the low AAEs (less than 20 kJ/mol) clearly indicated the diffusion control during BWS electrolysis reaction.