The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Metastable systems driven by colored noise: The stationary state

The influence of the Bardeen-Herring back-jump correlations on the Fermi-Dirac statistics of the one-dimensional nonhomogeneous fermionic lattice gas is studied by the Monte Carlo simulation technique and semianalytically. The resulting distribution is obtained, exhibiting increased population of the lower levels in comparison to the Fermi-Dirac statistics.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

发光反应型有机铵分子与CdSe纳米晶的组装

用巯基乙酸做稳定剂制备了水溶性CdSe纳米颗粒, 用十六烷基三甲基溴化铵(HTAB)、发光性(4-甲氧基均二苯乙烯基)二甲基乙基溴化铵 (MODAB)及末端含有双键的(4-甲基丙烯酰氧基均二苯乙烯基)二甲基乙基溴化铵(MSDAB)对该CdSe纳米颗粒进行了混合组装.通过改变三种有机分子的比例可以调控所得组装体的溶解性、聚合性及其发光性质.实验结果表明,当HTAB:MODAB:MSDAB=1:5.98～5.90:0.02～0.10(摩尔比)时,所得组装体具有较好的聚合性、溶解性和荧光性质.     

能量选择中子成像技术及其应用

能量选择中子成像技术是利用特定范围波长(能量)的中子进行成像。在热/冷中子范围内(<25meV),能量选择中子成像技术主要基于布拉格边效应和衍射机制,相比常规中子成像技术不但可以显著提高图像对比度,而且能分析应变、应力、织构。在超热中子范围内(>1eV),能量选择中子成像技术主要基于中子共振吸收,中子截面随能量变化是同位素特有的,存在明显的共振吸收峰,因此可以进行同位素的“指纹”识别。能量选择中子成像技术在工程、材料、化学、物理、生物、考古等众多科研领域中有着非常广阔的应用前景。     

基于永磁体间的磁性负刚度的分析与优化

为了有效地降低磁性负刚度结构的非线性程度,从简单三磁体结构出发,引入新型负刚度结构模型——五磁体对称结构,运用MATLAB建立新型负刚度结构的磁力学模型并应用Ansoft Maxwell进行仿真验证.研究永磁体间的相对位置参数对五磁体对称结构的负刚度曲线走势的影响,在微幅振动下对基于磁引力的负刚度曲线拟合后使用谐波平衡...     

超强飞秒激光与固体靶产生的超热电子加热机制

 在SILEX-1激光器上测量了超强飞秒激光与Ta靶相互作用产生的出射超热电子能谱及角分布,研究了出射超热电子加热机制。激光脉宽为 30 fs,激光功率密度为8.5×10¹⁸ W/cm²。靶前法线方向超热电子温度为550 keV。从实验结果可知：共振吸收是靶前法线方向超热电子主要加热机制,这与靶前存在大密度标长预等离子体的实验条件吻合。靶厚为6～50 μm时,靶后超热电子沿法线方向出射;靶厚为2 mm时,该发射峰消失。     

一种用于强激光系统的高比能脉冲电容器

 为了满足“神光-Ⅲ”原型装置能源系统的需要,桂林金属膜电容器厂研制成功一种高比能脉冲电容器,其尺寸为295 mm×138 mm×730(830) mm,额定电压25 kV,额定电容及偏差为55 μF,0~5 %,损耗角正切值(2.5 kV,50 Hz)小于 0.1%,比能达0.56 J/cm³ 。对该型电容器进行性能测试,所得电容偏差都在2%~5%范围,损失角正切值小于0.05%;极间耐压试验全部通过,极-地耐压试验全部通过。寿命试验中,放电电流5 kA,1×10⁴次充放电后,电容量下降1.8%。该型电容器目前已投入运行,工作情况良好。     

高能X光照相CCD成像系统的模糊效应

 指出了景深、可见光衍射、辐射输运是CCD图像接收系统模糊效应的3个影响因素。用MCNP方法研究了转换屏内的辐射输运,给出了不同入射光子能谱和转换屏厚度下转换屏内能量沉积随半径的变化关系。结果表明:能量沉积随转换屏厚度的增加而线性增加;辐射输运引起的模糊与光子能谱有关,但硬化谱引起的模糊随转换屏厚度的变化小于非硬化谱;转换屏内的辐射输运是CCD图像接收系统模糊效应的主要影响因素;辐射输运引起的模糊和高斯模糊是不同的。