Evaluation of the drag force by integrating the energy dissipation rate in stokes flow for 2D domains using the FEM

The total drag force on the surface of a body, which is the sum of the form drag and the skin friction drag in a 2D domain, is numerically evaluated by integrating the energy dissipation rate in the whole domain for an incompressible Stokes fluid. The finite element method is used to calculate both the energy dissipation rate in the whole domain as well as the drag on the boundary of the body. The evaluation of the drag and the energy dissipation rate are post-processing operations which are carried out after the velocity field and the pressure field for the flow over a particular profile have been obtained. The results obtained for the flow over three different but constant area profiles—a circle, an ellipse and a cross-section of a prolate spheroid—with uniform inlet velocity are presented and it is shown that the total drag force times the velocity is equal to the total energy dissipation rate in the entire finite flow domain. Hence, by calculating the energy dissipation rate in the domain with unit velocity specified at the far-field boundary enclosing the domain, the drag force on the boundary of the body can be obtained.     

高剥离类镁等电子序列的磁偶极M1和电四极E2光谱跃迁理论研究

利用全相对论性多组态Dirac-Fock广义平均能级方法，系统地计算了类镁离子3s3p磁偶极Ml^3P2--^3P1和电四极E2 ^2P2--^3P0(Z=20-103)光谱跃迁的能级间隔、跃迁几率和振子强度。计算中考虑了原子核的有限体积效应，进行了高阶Breit修正和QED修正，所得到的能级间隔和最近的实验数据及理论计算值进行了比较。计算结果表明：高原子序数的高荷电离子的磁偶极矩M1和电四极矩E2跃迁几率和中性原子的电偶极E1的相当，在ICF和MCF高温激光等离子体中，磁偶极矩M1和电四极矩E2跃迁过程不容被忽视。     

CO（ a）+ NO（X）传能体系中的新传能通道

在相对碰撞平动能为 0 .0 5eV的分子束实验条件下 ,研究了亚稳态CO(a) +NO(X)的E E传能通道 .通过测量和分析交碰区的传能发射光谱 ,在 780和 860nm处观测到了NO(b -a)跃迁Ogawa带的△v =+ 4和△v =+ 3序的发射光谱 .从而首次在实验上直接证实了传能过程中第四通道的存在 (CO (a) +NO(X)→CO (X) +NO(b) ) .这一通道的发现解释了前人测量到的在CO(a)与NO(X)碰撞传能过程中CO(a)的猝灭速率远大于NO(A ,B)生成速率的实验结果 ,并进一步证实了这一“经典”E E传能体系为电子交换机理的传能观点     

HL－1装置辅助加热等对能量约束的影响

在ＨＬ－１托卡马克上进行了辅助加热、加料、电流驱动的物理实验研究。在改善等离子体约束方面，某些实验取得了较好的结果。在适当的稳定放电条件下，低杂波电流驱动和弹丸注入辅助加料，均能使等离子体能量约束得到一定程度的改善，与相同密度条件下的欧姆加热放电相比，能量约束时间提高了约３０％。在电子回旋共振加热等离子体实验中，等离子体总能量明显增加，但与相同密度条件下的欧姆加热放电相比，能量约束时间减少了约２０％。     

氟氧化物陶瓷的多谱线上转换发光

以氧化硅、氟化铅为基质制备了Er3 :Yb3 共掺杂氟氧化物陶瓷 ,X 射线分析表明陶瓷中存在着 β PbF2 晶相 ,沉积在其中的稀土离子由于具有很低的无辐射跃迁几率而显示出良好的上转换性能。Er3 ,Yb3 离子之间存在的多种能量传递通道 ,导致稀土离子十分丰富的上转换谱线的出现。     

Methods in carbon K-edge NEXAFS: Experiment and analysis

Near-edge X-ray absorption spectroscopy (NEXAFS) is widely used to probe the chemistry and structure of surface layers. Moreover, using ultra-high brilliance polarised synchrotron light sources, it is possible to determine the molecular alignment of ultra-thin surface films. However, the quantitative analysis of NEXAFS data is complicated by many experimental factors and, historically, the essential methods of calibration, normalisation and artefact removal are presented in the literature in a somewhat fragmented manner, thus hindering their integrated implementation as well as their further development. This paper outlines a unified, systematic approach to the collection and quantitative analysis of NEXAFS data with a particular focus upon carbon K-edge spectra. As a consequence, we show that current methods neglect several important aspects of the data analysis process, which we address with a combination of novel and adapted techniques. We discuss multiple approaches in solving the issues commonly encountered in the analysis of NEXAFS data, revealing the inherent assumptions of each approach and providing guidelines for assessing their appropriateness in a broad range of experimental situations.     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合体系的研究

六甲氧基甲基三聚氰胺 (HMMM) 多元醇 丙烯酸酯 酸催化剂混杂聚合体系在高温下同时进行缩聚和自由基聚合并表现出协同效应 .体系中的活泼亚甲基在HMMM的催化下被空气氧化成过氧化氢物 ;过氧化氢物在酸催化下分解成自由基进而引发自由基聚合反应 .研究结果表明 ,体系中存在固化加速的协同效应 ;同时体系中还存在热互补效应 ,丙烯酸酯的自由基聚合反应放出的热可以传递给缩聚反应 ,满足缩聚反应吸热的要求 .混杂聚合得到的高分子合金膜具有优良的机械性能和耐溶剂性能 ,这是由于在混杂聚合过程中形成了互穿聚合物网络 (IPN)结构 .使用潜酸催化剂作为酸的来源 ,可以提高体系的储存稳定性 ;交联 引发剂的使用可以拓宽它的使用范围 ;对超枝化聚合物在混杂体系中的应用也进行了初步研究     

Extension of the measuring range of balances

The basic principle of comparing the sample mass with the mass of a reference body in equilibrium gives the equal-armed beam balance a unique accuracy. Main parameters characterising the suitability of the instrument are measuring range, resolution and relative sensitivity (resolution/maximum load). The historical development of the values of these parameters achieved depended strongly on the practical need in those times. Technically unfavourable scales of the oldest Egyptian dynasties (~3000 BC) could resolve mass differences of 1 g and had a relative sensitivity of at least 10^–3. More sophisticated instruments from the 18^th Dynasty (~1567–1320 BC) achieved a relative sensitivity of 10^–4 independent of the size of the instrument. In 350 BC Aristotle clarified the theory of the lever and at about 250 BC Archimedes used the balance for density determinations of solids. The masterpiece of a hydrological balance was Al Chazini’s 'Balance of Wisdom’ built about 1120. Its relative sensitivity was 2⋅10^–5. Real progress took place when scientists like Lavoisier (1743–1794) founded modern chemistry. At the end of the 19^th century metrological balances reached a relative sensitivity of 10^–9 with a maximum load of several kilogrammes. That seems to be the high end of sensitivity of the classical mechanical beam balance with knife edges. Improvements took place by electrodynamic compensation (Emich, Gast). In 1909 Ehrenhaft and Millikan could weigh particles of 10^–15 g by means of electrostatic suspension. In 1957 Sauerbrey invented the oscillating quartz crystal balance. By observing the frequency shift of oscillating carbon nanotubes or of silica nanorods, masses or mass changes in the attogram or zeptogram have been observed recently.     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合过程热互补效应的研究

六甲氧基甲基三聚氰胺（HMMM）－多元醇－丙烯酸酯－酸催化剂的混合体系在较高温度下同时进行缩聚和自由基聚合并表现出协同效应，DSC研究结果表明，丙烯酸酯在HMMM和酸的催化作用下可在较低温度下发生自由基聚合反应，并把反应释放出来的大量的热量有效地传递给缩聚发反应，满足缩聚反应吸热的要求，从而节省固化所需要的能量，为了提高储存稳定性。本文以潜酸催化剂作为酸的来源，对该混杂聚合体系进行了研究，仍有明显的热互补效应。     

聚合物系统中的传能和光化学

评论了聚合物系统中非辐射能量传递类型,影响能量传递的因素,以及能量传递同聚合物光化学的关系,附22篇文献。