基于邻域贡献权值细化的圆心亚像素定位算法

针对传统的圆心算法过程复杂、定位精度受初始边缘提取效果影响较大等问题,提出了一种基于邻域贡献权值细化的圆心亚像素定位算法。首先引入邻域贡献权值系数,改进传统非极大值抑制法,细化边缘;然后在边缘点的梯度方向对灰度值进行高斯拟合,确定亚像素边缘位置;最后针对边缘突变点提出了基于随机抽样一致的最小二乘法来拟合圆心。实验结果表明,该算法具有较好的精度和稳定性,圆心的提取精度可以达到0.1个像素。     

Carbon K‐edge spectra of carbonate minerals

Carbon K‐edge X‐ray spectroscopy has been applied to the study of a wide range of organic samples, from polymers and coals to interstellar dust particles. Identification of carbonaceous materials within these samples is accomplished by the pattern of resonances in the 280–320 eV energy region. Carbonate minerals are often encountered in the study of natural samples, and have been identified by a distinctive resonance at 290.3 eV. Here C K‐edge and Ca L‐edge spectra from a range of carbonate minerals are presented. Although all carbonates exhibit a sharp 290 eV resonance, both the precise position of this resonance and the positions of other resonances vary among minerals. The relative strengths of the different carbonate resonances also vary with crystal orientation to the linearly polarized X‐ray beam. Intriguingly, several carbonate minerals also exhibit a strong 288.6 eV resonance, consistent with the position of a carbonyl resonance rather than carbonate. Calcite and aragonite, although indistinguishable spectrally at the C K‐edge, exhibited significantly different spectra at the Ca L‐edge. The distinctive spectral fingerprints of carbonates provide an identification tool, allowing for the examination of such processes as carbon sequestration in minerals, Mn substitution in marine calcium carbonates (dolomitization) and serpentinization of basalts.     

Anodic stripping voltammetry of antimony at unmodified carbon electrodes

Antimony is an element of significant environmental concern, yet has been neglected relative to other heavy metals in electroanalysis. As such very little research has been reported on the electroanalytical determination of antimony at unmodified carbon electrodes. In this paper we report the electrochemical determination of Sb(III) in HCl solutions using unmodified carbon substrates, with focus on non-classical carbon materials namely edge plane pyrolytic graphite (EPPG), boron doped diamond (BDD) and screen-printed electrodes (SPE). Using differential pulse anodic stripping voltammetry, EPPG was found to give a considerably greater response towards antimony than other unmodified carbon electrodes, allowing highly linear ranges in nanomolar concentrations and a detection limit of 3.9?nM in 0.25?M HCl. Furthermore, the sensitivity of the response from EPPG was 100 times greater than for glassy carbon (GC). Unmodified GC gave a comparable response to previous results using the bare substrate, and BDD gave an improved, yet still very high limit of detection of 320?nM compared to previous analysis using an iridium oxide modified BDD electrode. SPEs gave a very poor response to antimony, even at high concentrations, observing no linearity from standard additions, as well as a major interference from the ink intrinsic to the working electrode carbon material. Owing to its superior performance relative to other carbon electrodes, the EPPG electrode was subjected to further analytical testing with antimony. The response of the electrode for a 40?nM concentration of Sb(III) was reproducible with a mean peak current of 1.07?µA and variation of 8.4% (n?=?8). The effect of metals copper, bismuth and arsenic were investigated at the electrode, as they are common interferences for stripping analysis of antimony.     

Multiple mobility edges in a 1D Aubry chain with Hubbard interaction in presence of electric field: Controlled electron transport

Electronic behavior of a 1D Aubry chain with Hubbard interaction is critically analyzed in presence of electric field. Multiple energy bands are generated as a result of Hubbard correlation and Aubry potential, and, within these bands localized states are developed under the application of electric field. Within a tight-binding framework we compute electronic transmission probability and average density of states using Green's function approach where the interaction parameter is treated under Hartree–Fock mean field scheme. From our analysis we find that selective transmission can be obtained by tuning injecting electron energy, and thus, the present model can be utilized as a controlled switching device.     

纳米氧化锌的过饱和控制生长与大小分布控制.

"在非水介质中合成了纳米氧化锌,测定了纳米氧化锌的紫外吸收光谱,并用有效质量模型计算了粒子大小,开发并命名了一种称之为纳米粒子过饱和控制生长的技术,该技术涉及将小的纳米粒子悬浊液加入到大的粒子悬浊液中,结果因为不同大小粒子间的溶解度差异小的粒子将全部溶解,大的粒子将整体长大,大粒子悬浊液的粒子数将保持不变,大粒子的生长速度显著比Ostwald老化的高．该技术最显著的特征是只要最初两悬浊液粒子大小的差异足够大,分布不是太宽,则粒子大小的分布将会因为粒子如此长大而变窄．"     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

Large Cross‐Free Sets in Steiner Triple Systems

A cross‐free set of size m in a Steiner triple system is three pairwise disjoint m‐element subsets such that no intersects all the three ‐s. We conjecture that for every admissible n there is an STS(n) with a cross‐free set of size which if true, is best possible. We prove this conjecture for the case , constructing an STS containing a cross‐free set of size 6k. We note that some of the 3‐bichromatic STSs, constructed by Colbourn, Dinitz, and Rosa, have cross‐free sets of size close to 6k (but cannot have size exactly 6k). The constructed STS shows that equality is possible for in the following result: in every 3‐coloring of the blocks of any Steiner triple system STS(n) there is a monochromatic connected component of size at least (we conjecture that equality holds for every admissible n). The analog problem can be asked for r‐colorings as well, if and is a prime power, we show that the answer is the same as in case of complete graphs: in every r‐coloring of the blocks of any STS(n), there is a monochromatic connected component with at least points, and this is sharp for infinitely many n.     

Effect of pH value on the growth morphology of KH2PO4 crystal grown in defined crystallographic direction

KH₂PO₄ single crystals were grown in aqueous solution at different pH values by using “point seeds” with a defined crystallographic direction at 59 degree to the Z axis. Atomic Force Microscope (AFM) was applied to observe the surface morphology of (100) face. It was found that at the same supersaturation, the larger steps appeared at the lower pH value before appearance of 2D nucleus. We found that 2D nucleus was occurred at σ ≤ 0.04 when pH value is <2.8. The occurrence of 2D nucleus was caused by the decreasing step‐edge free energy with the decreasing of pH value in the growth solution. In this paper, we observed the morphologies of (100) faces of KDP crystals which grew in solutions with different pH values. 2D nucleuses appeared on the terrace of growth steps when pH value down to 2.8 and 3.2 at supersaturation of 0.04, while pH value down to 2.4, only 2D nucleation control the growth. Therefore, the pH value can change the growth mechanism of KDP crystals.