含离子液体［bmim］Cl的反应介质中马肝醇脱氢酶的催化特性

 研究了马肝醇脱氢酶(HLADH)在含离子液体1-丁基-3-甲基咪唑氯酸盐(［bmim］Cl)的反应介质中的催化特性. 以乙醇为底物时,该酶在［bmim］Cl含量≤0.15 g/ml的体系中的活力高于在不含离子液体的体系中的活力; 离子液体浓度过高(＞0.15 g/ml)对酶活性有明显的抑制作用. 反应温度和pH对含离子液体的反应介质中酶活力的影响规律与不含离子液体时的规律相似. 与不含离子液体的反应介质相比, HLADH在含0.05 g/ml ［bmim］Cl的体系中催化乙醇氧化的活化能下降,酶反应的Vmax和Km均升高. 反应体系中低浓度(≤0.1 g/ml)的离子液体能提高酶的热稳定性,但高浓度(＞0.1 g/ml)的离子液体可降低酶的热稳定性. 紫外二阶导数光谱显示,在含不同浓度离子液体的反应介质中酶分子构象的变化有较大的差异.     

Operating characteristics and energy distribution in transferred plasma arc systems

A specially designed plasma chamber was constructed to study the operating characteristics of a dc plasma-transferred arc of argon, struck between a fluid convective cathode and a water-cooled anode. The arc voltage increased markedly with arc length and with an increase in the inlet velocity of the argon flow past the cathode tip, and much less with an increase in current. Radiation from the plasma column to the chamber walls and transfer of energy to the anode were the two principal modes of transfer of the arc energy. The former was dominant in the case of long arcs and at high inlet argon velocities. At the anode, the major contribution was from electron transfer, which occurred on a very small area of the anode (～5 mm in diameter). Convective heat transfer from the plasma was somewhat less. In all cases, the arc energy contributions to cathode cooling and to the exit gas enthalpy were small. From total heat flux and radiative heat transfer measurements, it was estimated that the plasma temperature just above the anode was in the range 10,000–12,000 K. Preliminary experiments with an anode consisting of molten copper showed that the arc root was no longer fixed but moved around continuously. The arc was othwewise quite stable, and its operating characteristics differed little from those reported for solid anodes, in spite of the greater extent of metal vaporization.     

The influence of grafted functional groups on the adsorption properties of silica

The adsorption properties of silica gel with grafted aminopropyl and guanidinoethanethiol (GET) groups were studied by the techniques of adsorption under static conditions and gas chromatography. It was shown that molecules capable of forming hydrogen bonds are adsorbed on all modified samples more weakly than on the initial silica gel. The grafting of GET radicals on the surface results in a noticiable increase in the dispersion interaction with adsorbed molecules. Calculation of the contributions of molecular groups to the constant of adsorption equilibrium showed that the thermodynamic characteristics of adsorption on aminosilochromes and aminosilicas with a polymeric layer of the modifying agent have similar values. Such adsorbents can be used for investigation of polar compounds, including organic bases. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 452–457, March, 1997.     

Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.     

三电极共面介质阻挡放电的放电特性及诱导气流实验研究

等离子体流动控制激励器由于其响应速度快、激励频带宽、能量损耗低、可靠性强的优势,在航空航天领域的主动流动控制等方面得到了广泛应用.文章提出了一种新型的等离子体气动激励器——三电极共面介质阻挡放电激励器,研究了该激励器电极结构对放电特性和诱导气流速度的影响,并与传统共面介质阻挡放电和沿面介质阻挡放电激励器进行了比较.结果表明:（1）随着激励电压的提高,高压电极和地电极之间先出现了丝状放电并逐渐延伸到第三电极;（2）随着第三电极与高压电极之间的距离增大,诱导气流速率从2.4 m/s下降到0 m/s,而第三电极宽度的变动对诱导气流速度影响可忽略不计;（3）相同外部条件下,该激励器诱导的气流速度小于沿面介质阻挡放电激励器,但高于共面介质阻挡放电激励器.      

围绕财经特色主题加强《高等代数》精品课程建设

我校精品课程《高等代数》建设的思路是,围绕财经特色主题,坚持以高等代数理论为基础,以经济、管理类的专业为依托,以数学实验室为训练基地,将数学建模的思想融入到《高等代数》的教学活动中.这种教学模式的改变不仅有利于学生的培养,而且有助于培养出一支有较高水平的师资队伍.使我们的《高等代数》课程真正成为高水平、高质量的示范性课程.     

超临界水在倾斜光管中的传热不均匀特性研究

对超(超)临界压力下水在倾斜光管内的传热特性进行了比较系统的实验研究.实验段管径为φ32×3mm,倾角α=20°;试验压力P=23~34MPa,内壁热负荷q=300~500kW/m2,管内质量流速G=300~2000kg/m2s.得到了不同工况下倾斜光管内壁温和管内换热系数的周向分布及其变化规律,考察了压力、质量流速及热负荷对倾斜光管内壁温度的周向分布的影响,重点分析了管内上下母线处内壁温度差随工质焓值变化的特性及机理,讨论了大比热区水的物性变化对倾斜光管内传热不均匀性的影响,并与亚临界压力下的对应实验结果进行了比较.     

Effect of Poly(methacrylic acid) on the Cytokine Level in an In Vivo Tumor Model

Cancer is a leading cause of mortality globally. Despite remarkable improvements in cancer-treatment approaches, disease recurrence and progression remain major obstacles to therapy. While chemotherapy is still a first-line treatment for a variety of cancers, the focus has shifted to the development and application of new approaches to therapy. Nevertheless, the relationship between immune response, neoplastic diseases and treatment efficiency is not fully understood. Therefore, the aim of the study was to investigate the immunopharmacological effects of methacrylic acid homopolymer in an in vivo tumor model. Materials and methods: Monomeric methacrylic acid was used to synthesize polymers. Methacrylic acid was polymerized in dioxane in the presence of 4-Cyano-4-[(dodecylsulfanylthiocarbonyl)sulfanyl]pentanoic acid. To study the molecular weight characteristics of PMAA by GPC, carboxyl groups were preliminarily methylated with diazomethane. An experimental cancer model was obtained by grafting RMK1 breast cancer cells. The serum levels of IL-6, IL-10, IL-17, transforming growth factor β1 (TGF-β1), and tumor necrosis factor α (TNF-α) were measured by ELISA. Results: The effect of PMAA on the serum concentrations of several cytokines was studied upon its single administration to laboratory animals in early neoplastic process. The IL-6, IL-17 and TGF-β1 concentrations were found to change significantly and reach the level observed in intact rats. The IL-10 concentration tended to normalize. Conclusion: The positive results obtained are the basis for further studies on the effect of methacrylic-acid polymers with different molecular-weight characteristics on the neoplastic process.     

Light-Responsive Hexagonal Assemblies of Triangular Azo Dyes

The rational design of small building block molecules and understanding their molecular assemblies are of fundamental importance in creating new stimuli-responsive organic architectures with desired shapes and functions. Based on the experimental results of light-induced conformational changes of four types of triangular azo dyes with different terminal functional groups, as well as absorption and fluorescence characteristics associated with their molecular assemblies, we report that aggregation-active emission enhancement (AIEE)-active compound (1) substituted with sterically crowded tert-butyl (t-Bu) groups showed approximately 35% light-induced molecular switching and had a strong tendency to assemble into highly stable hexagonal structures with AIEE characteristics. Their sizes were regulated from nanometer-scale hexagonal rods to micrometer-scale sticks depending on the concentration. This is in contrast to other triangular compounds with bromo (Br) and triphenylamine (TPA) substituents, which exhibited no photoisomerization and tended to form flexible fibrous structures. Moreover, non-contact exposure of the fluorescent hexagonal nanorods to ultraviolet (UV) light led to a dramatic hexagonal-to-amorphous structure transition. The resulting remarkable variations, such as in the contrast of microscopic images and fluorescence characteristics, were confirmed by various microscopic and spectroscopic measurements.     

基于VLES模型的振动圆柱数值模拟

本文将一种VLES(Very Large Eddy Simulation)模型引入到动网格数值计算中,并验证了VLES模型用于模拟类似振动圆柱绕流的动边界问题的有效性.数值求解了不同振幅和频率下非稳态振动圆柱绕流问题.研究表明:随着振幅和激励频率的增加,绕圆柱流动涡脱离形式从2S模式转换到2P0模式,再到P+S模式.在...